Retrieve Transaction
Request to retrieve the details of a transaction. For example you can retrieve the details of an authorization that you previously executed.
Authentication Copied to clipboard
This operation requires authentication via one of the following methods:
- Certificate authentication.
-
To authenticate to the API two additional NVP parameters must be supplied in the request.
Provide 'merchant.
<your gateway merchant ID>' in the apiUsername field and your API password in the apiPassword field.
Request Copied to clipboard
Fields Copied to clipboard
String
= RETRIEVE_TRANSACTION
FIXED
Any sequence of zero or more unicode characters.
String
OPTIONAL
A transient identifier for the request, that can be used to match the response to the request.
The value provided is not validated, does not persist in the gateway, and is returned as provided in the response to the request.
Data can consist of any characters
Alphanumeric + additional characters
REQUIRED
The unique identifier issued to you by your payment provider.
This identifier can be up to 12 characters in length.
Data may consist of the characters 0-9, a-z, A-Z, '-', '_'
String
REQUIRED
A unique identifier for this order to distinguish it from any other order you create.
Use this identifier when referring to this order in subsequent transactions and in retrieval operations. This value must be unique for every order you create using your merchant profile.
Data can consist of any characters
Container for fields that control the response returned for the request.
String
OPTIONAL
Indicates how sensitive data is returned in the response.
Data can consist of any characters
String
REQUIRED
Unique identifier for this transaction to distinguish it from any other transaction on the order.
An order can have transactions representing:
- Movement of money. For example, payments and refunds.
- Validations. For example, account verification or 3-D Secure authentication of the payer.
- Undoing other transactions. For example, voiding a payment transaction.
- Chargebacks.
- Fees from your payment service provider.
If you attempt an operation and it fails (eg you try to PAY on a card with no funds), then you need a new id for each retry.
Data can consist of any characters
Response Copied to clipboard
Fields Copied to clipboard
Additional details for account funding transactions (order.purchaseType=ACCOUNT_FUNDING).
Account funding transactions are transactions that pull money from the sender's card account for the purpose of funding another account, the recipient's account. Depending on the type of account funding transaction you may be required to provide some or all the details in this parameter group.
Enumeration
CONDITIONAL
Defines the purpose of the account funding payment.If not provided the value is defaulted to OTHER.
Value must be a member of the following list. The values are case sensitive.
CRYPTOCURRENCY_PURCHASE
The funds from this account funding transaction will exclusively be used to purchase cryptocurrency.
MERCHANT_SETTLEMENT
The funds from this account funding transaction will be used to settle the proceeds of processing card transactions.
OTHER
The funds from this account funding transaction will be used for any other purpose, e.g. transferring funds from a person to a person or transferring funds into a staged wallet. This is the default value.
PAYROLL
The funds from this account funding transaction will be used to pay salaries.
Details about the recipient who will subsequently receive the funds that you are debiting from the sender in this transaction.
Details about the account of recipient who will subsequently receive the funds that you are debiting from the sender in this transaction.
Enumeration
CONDITIONAL
If the recipient account type is an account with an associated card (accountFunding.recipient.account.identifierType=CARD_NUMBER) you must specify the funding method of the card.
If not provided the value is defaulted to UNKNOWN.
Value must be a member of the following list. The values are case sensitive.
CHARGE
The payer has a line of credit with the issuer which must be paid off monthly.
CREDIT
The payer has a revolving line of credit with the issuer.
DEBIT
Funds are immediately debited from the payer's account with the issuer.
UNKNOWN
The account funding method is not known. This is the default value.
String
CONDITIONAL
The account identifier for the payment recipient's account.
For example, this may be a card number or bank account number. You must specify the type of identifier in field accountFunding.recipient.account.identifierType. In the response, the value will be masked. The masking format depends on the type of account identifier.
Data can consist of any characters
Enumeration
CONDITIONAL
Defines the type of the recipient's account identifier that you have provided in field accountFunding.recipient.account.identifier.
If not provided the value is defaulted to OTHER.
Value must be a member of the following list. The values are case sensitive.
BANK_ACCOUNT_BIC
The recipient's account identifier is a bank account number and Business Identifier Code (BIC).
BANK_ACCOUNT_IBAN
The recipient's account identifier is an International Bank Account Number (IBAN).
BANK_ACCOUNT_NATIONAL
The recipient's account identifier is a bank account number and a national bank identifier, for example, a routing number (RTN).
CARD_NUMBER
The recipient's account identifier is a card number.
EMAIL_ADDRESS
The recipient's account identifier is an email address.
OTHER
The recipient's account identifier type can not be classified using any of the other categories. This is the default value
PHONE_NUMBER
The recipient's account identifier is a phone number.
SOCIAL_NETWORK_PROFILE_ID
The recipient's account identifier is a social network profile ID.
STAGED_WALLET_USER_ID
The recipient's account identifier is a user ID for a staged digital wallet. For a staged wallet, when the payer makes a payment using the wallet, the funds are pulled from an account associated with the wallet (first stage) before they are credited to the recipient of the wallet payment (second stage).
STORED_VALUE_WALLET_USER_ID
The recipient's account identifier is a user ID for a stored value wallet. A stored value wallet requires the payer to preload the wallet with funds before they can use the wallet to make a payment.
Details of the recipient's address.
String
CONDITIONAL
The city portion of the address.
Data can consist of any characters
Upper case alphabetic text
CONDITIONAL
The 3 letter ISO standard alpha country code of the address.
Data must consist of the characters A-Z
String
CONDITIONAL
The post code or zip code of the address.
Data can consist of any characters
String
CONDITIONAL
The second part of the ISO 3166-2 country subdivision code for the state or province of the address.
For an address in the United States provide the 2-letter ISO 3166-2 state code. For US military bases provide one of AE, AA, AP. For an address in Canada provide the 2-letter ISO 3166-2 province code.
Data can consist of any characters
String
CONDITIONAL
The first line of the address.
Data can consist of any characters
String
CONDITIONAL
The second line of the address.
Data can consist of any characters
String
CONDITIONAL
First name of the recipient.
Data can consist of any characters
Identification of the recipient.
Upper case alphabetic text
CONDITIONAL
The ISO 3166 three-letter country code of the issuer of the identification.
Data must consist of the characters A-Z
Enumeration
CONDITIONAL
The type of identification provided for the recipient.
Value must be a member of the following list. The values are case sensitive.
ALIEN_REGISTRATION_NUMBER
The recipient's identification type is an alien registration number issued by U.S. Citizenship and Immigration Services (USCIS) to immigrants who apply to live in the United States.
BUSINESS_TAX_ID
The recipient's identification type is a business tax id which is assigned to the business entity by the tax department.
COMPANY_REGISTRATION_NUMBER
The recipient's identification type is a company registration number which is issued to the company at the time of its incorporation.
CUSTOMER_IDENTIFICATION
The recipient's identification type is an unspecified form of customer identification through which the recipient can be identified and verified.
DATE_OF_BIRTH
The recipient's identification type is date of birth.
DRIVERS_LICENSE
The recipient's identification type is a driving license.
EMAIL
The recipient's identification type is an email address.
GOVERNMENT_ISSUED
The recipient's identification type is government issued.
INDIVIDUAL_TAX_ID
The recipient's identification type is an individual tax id which is assigned to the individual by the tax department.
LAW_ENFORCEMENT_IDENTIFICATION
The recipient's identification type is a law enforcement identification.
MILITARY_IDENTIFICATION
The recipient's identification type is a military identification which is issued by the department of defense and military.
NATIONAL_IDENTIFICATION_CARD
The recipient's identification type is a national identification card issued by the recipient's country.
OTHER
The recipient's identification type cannot be classified using any of the other categories. This is the default value.
PASSPORT
The recipient's identification type is a passport.
PHONE_NUMBER
The recipient's identification type is a phone number.
PROXY_IDENTIFICATION
The recipient's identification type is a proxy identification.
SOCIAL_SECURITY_NUMBER
The recipient's identification type is a social security number issued by Social Security Administration (SSA) to U.S. citizens, permanent residents and eligible non-immigrant workers in the United States.
TRAVEL_IDENTIFICATION
The recipient's identification type is a travel document other than a passport.
String
CONDITIONAL
The identification value/number for the type of identification provided in accountFunding.recipient.identification.type.
Data can consist of any characters
String
CONDITIONAL
Last name of the recipient.
Data can consist of any characters
String
CONDITIONAL
Middle name of the recipient.
Data can consist of any characters
String
ALWAYS PROVIDED
An reference for this account funding transaction.
This reference is generated by the gateway. You may be required to provide this reference when subsequently crediting the funds to the recipient's account.
Data can consist of any characters
Boolean
CONDITIONAL
Defines if the sender and recipient of the account funding payment are the same or not.
If not provided the value is defaulted to FALSE.
The values 'true' or 'false'. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#boolean.)
Enumeration
CONDITIONAL
Defines if the sender is a person, a commercial organization, a non-profit organization or a government
Value must be a member of the following list. The values are case sensitive.
COMMERCIAL_ORGANIZATION
The sender is a commercial organization. Examples include account to account transfers initiated by a commercial organization for the purpose of transferring funds to one of their accounts, business to business payments, and disbursements for insurance claims, payroll, investment dividends, merchant rebates.
GOVERNMENT
The sender is a government or government agency. Examples include government agencies paying salaries, pensions, social benefits or tax credits.
NON_PROFIT_ORGANIZATION
The sender is a non-profit organization. Examples include non-profit organizations delivering emergency aid payments.
PERSON
The sender is a person. Examples include account to account transfers initiated by a person to their own account or a different person's account and adding funds to a staged wallet.
Actions that you want the gateway to perform.
Boolean
CONDITIONAL
Use this field to indicate that you want the gateway to authorize the Refund with the issuer before submitting it to the acquirer.
Depending on your merchant profile configuration the gateway may or may not already attempt to authorize the Refund with the issuer before submitting it to the acquirer.
The values 'true' or 'false'. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#boolean.)
A series of related orders that execute one commercial agreement.
For example, linking the orders for a series of recurring payments (a mobile phone subscription), split tenders (one payment using two cards), or when the merchant offers to take payments by a series of installments (hire purchase).
You must provide this data for some types of payments (such as recurring), but you can provide it for any cases where you want to link orders together.
Enumeration
CONDITIONAL
Indicates if all the payments within the agreement use the same amount or if the amount differs between the payments.
The field must be provided for recurring payment agreements.
Value must be a member of the following list. The values are case sensitive.
FIXED
All payments in the recurring payment agreement have the same amount. Examples include magazine subscriptions or gym memberships.
VARIABLE
The amount for the payments within the recurring payment agreement differs between payments. Examples include usage-based charges like utility or phone bills.
String
CONDITIONAL
Additional information requested for the agreement which cannot be passed using other available data fields.
This field must not contain sensitive data.
Data can consist of any characters, but sensitive data will be rejected
Date
CONDITIONAL
Date at which your agreement with the payer to process payments expires.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
String
CONDITIONAL
Your identifier for the agreement you have with the payer to process payments.
When you collect cards from your payers and store them for later use, you must provide an agreement ID when you use the stored values for:
- Recurring payments: you have an agreement with the payer that authorizes you to automatically debit their account at agreed intervals for fixed or variable amounts. For example, gym membership, phone bills, or magazine subscriptions.
- Installment payments: you have an agreement with the payer that authorizes you to process multiple payments over an agreed period of time for a single purchase. For example, the payer purchases an item for $1000 and pays for it in four monthly installments.
- Unscheduled: you have an agreement with the payer that authorizes you to process future payments when required. For example, the payer authorizes you to process an account top-up transaction for a transit card when the account balance drops below a certain threshold.
- Industry Practice: you have an agreement with the payer that authorizes you to initiate additional transactions to fulfil a standard business practice related to an original payment initiated by the payer. For example, a delayed charge for use of the hotel mini bar after the payer has checked out or a no show penalty charge when the payer fails to show for a booking.
Data can consist of any characters
Decimal
CONDITIONAL
The maximum amount for a single payment in the series as agreed with the payer under your agreement with them.
The amount must be provided in the currency of the order.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Decimal
CONDITIONAL
The minimum amount for a single payment in the series as agreed with the payer under your agreement with them.
The amount must be provided in the currency of the order.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Integer
CONDITIONAL
The minimum number of days between payments agreed with the payer under your agreement with them.
A number comprising the digits 0-9, having at least one digit. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#nonNegativeInteger.)
Integer
CONDITIONAL
The number of merchant-initiated payments within the recurring payment agreement.
A number comprising the digits 0-9, having at least one digit. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#nonNegativeInteger.)
Enumeration
CONDITIONAL
The frequency of the payments within the series as agreed with the payer under your agreement with them.
Value must be a member of the following list. The values are case sensitive.
AD_HOC
The agreement if for payments on an ah-hoc basis.
DAILY
The agreement if for a daily payment.
FORTNIGHTLY
The agreement if for a fortnightly payment.
MONTHLY
The agreement if for a monthly payment.
OTHER
The agreement is for payments according to a schedule other than the ones listed in the other enumeration values for this field.
QUARTERLY
The agreement if for a quarterly payment.
TWICE_YEARLY
The agreement if for a payment twice a year.
WEEKLY
The agreement if for a weekly payment.
YEARLY
The agreement if for a yearly payment.
For an installment agreement where the payer purchased goods and/or services from a retailer but entered an installment agreement to pay for this purchase with you, you must provide details about the retailer.
String
CONDITIONAL
Provide an abbreviation of the retailer's trading name that can be used by the issuer to indicate the retailer on the payer's statement.
Data can consist of any characters
String
CONDITIONAL
A 4-digit code used to classify the retailer's business by the type of goods or services it offers.
Data can consist of any characters
String
CONDITIONAL
The retailer's trading name.
Data can consist of any characters
Date
CONDITIONAL
This is the effective start date for the payment agreement.
Cannot be in the past.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
Enumeration
CONDITIONAL
The type of commercial agreement that the payer has with you.
Specify the agreement type when you have provided a value for agreement.id and this payment is the first in a series of payments. The default value is OTHER.
The gateway will use the value you specify for subsequent payments in the series.
Value must be a member of the following list. The values are case sensitive.
INSTALLMENT
An agreement where the payer authorizes the payment for a single purchase to be split into a number of payments processed at agreed intervals. For example, pay for a purchase in six monthly installments.
OTHER
An agreement where you want to link related payments for any purpose other than processing recurring, installment, or unscheduled payments. For example, split tender payments.
RECURRING
An agreement where the payer authorizes you to process repeat payments for bills or invoices at agreed intervals (for example, weekly, monthly). The amount might be fixed or variable.
UNSCHEDULED
An agreement where the payer authorizes you to automatically deduct funds for a payment for an agreed purchase when required (unscheduled). For example, auto top-ups when the account value falls below a threshold.
Information used to manage interactions with the payment provider if you are offering your payment page in an app or are redirecting the payer to the provider's app.
If you are offering your payment page on a website or are redirecting the payer's browser to the provider's website, use the browserPayment parameter group.
Url
CONDITIONAL
The URL of payment provider's app to which you must redirect the payer to complete the payment.
If you want to redirect the payer to the payment provider's website use browserPayment.redirectUrl. If you want to present the payment provider's checkout flow in a modal window on top of your payment page, use the functions provided in the JavaScript library instead.
Data must be an absolute URI conforming to the URI syntax published by IETF RFC 2396.
Url
CONDITIONAL
The URL of your app to which you want the payer to be redirected on completing the payment interaction at the payment provider's website or in the payment provider's app.
The same return URL will be used by the gateway to redirect the payer irrespective of the success or otherwise of the payment interaction. This field is not required if the payer is to be redirected to your website or if the payment provider's checkout flow is presented on a modal window on top of your payment page.
Data must be an absolute URI conforming to the URI syntax published by IETF RFC 2396.
Information about the Authorization received from the acquirer or issuer.
You can use this data if you want to understand the authorization in more detail, or with less interpretation by the gateway.
This data must be provided to the acquirer in the Capture request for this Authorization.
- For a subsequent Capture the gateway takes care of this for you.
- For a Standalone Capture request you need to provide this data.
- When performing the Capture outside the the gateway you must ensure that the data is provided in the Capture request to the acquirer.
Alphanumeric
CONDITIONAL
The authentication token verification result code provided by the scheme.
For Discover ProtectBuy transactions this is known as CAVV (Cardholder Authentication Verification Value) result code.
Data may consist of the characters 0-9, a-z, A-Z
DateTime
CONDITIONAL
The date and time when the gateway considers the authorization obtained for the order to have expired.
After this time, the gateway will reject your attempts to capture funds against this order. It will also void any authorized amount that has not been captured, to release the payer's funds.
This capability is to assist you in scheme compliance, and must be enabled by your payment provider. The gateway only populates this field if it is expiring the authorization.
An instant in time expressed in ISO8601 date + time format - "YYYY-MM-DDThh:mm:ss.SSSZ"
ASCII Text
CONDITIONAL
The acquirer AVS response code generated by the card issuing institution.
Data consists of ASCII characters
String
CONDITIONAL
Indicates the card level result returned by the issuer.
Data can consist of any characters
String
CONDITIONAL
CSC Incorrect Indicator.
An indicator, provided by the Issuer in the authorization response, to identify the presence of an invalid card security code (CSC). If there is an error, the Issuer will respond with the 1-byte CSC Error Code (Y).
Data can consist of any characters
Alphanumeric
CONDITIONAL
An Indicator, if a Card security code was provided for the Transaction, as returned by the acquirer.
Data may consist of the characters 0-9, a-z, A-Z
String
CONDITIONAL
Indicates if the card used is a commercial card.
Data can consist of any characters
String
CONDITIONAL
Indicates the type of commercial card as returned by the card issuer.
Data can consist of any characters
String
CONDITIONAL
The local date, in MMDD format, on which the transaction occurred.
Data can consist of any characters
String
CONDITIONAL
Indicates the code of the financial network that was used to process the transaction with the issuer.
Data can consist of any characters
Date
CONDITIONAL
The date for the Authorization as returned by the scheme.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
String
CONDITIONAL
Indicates the market or the industry associated with the payment.
For example, B may indicate "bill payment" depending on the acquirer.
Data can consist of any characters
String
CONDITIONAL
This field contains data returned by the issuer or card network to clearly communicate to merchants the reason for declining a MasterCard or Visa transaction.
Merchants can use this information to determine the best action to take. Please refer to Troubleshooting & FAQs - What if my transaction gets declined? for the list of values and their meaning.
Data can consist of any characters
String
CONDITIONAL
Payment Service Data required in settlement request.
Data can consist of any characters
String
CONDITIONAL
Indicates the specific card information conditions for capture that are available when the card transaction occurs at point of service.
Data can consist of any characters
String
CONDITIONAL
The POS Entry Mode provided to Discover (JCB (US Domestic only), and Diners) for the authorization.
Bytes 1-2: Discover (JCB (US Domestic only), and Diners) POS Entry Mode
Byte 3: Discover (JCB (US Domestic only), and Diners) Pin Entry Capability
Byte 4: RFU (Always zero)
Note: Only the first 3 bytes are required for settlement processing.
Data can consist of any characters
String
CONDITIONAL
If the entry mode has changed, the Issuer will respond with the 1-byte POS Entry Mode Change (Y).
Data can consist of any characters
String
CONDITIONAL
Identifies the type of Card Transaction sent to Card Acceptor.
Data can consist of any characters
String
CONDITIONAL
The response code which indicates the status of the transaction.
Data can consist of any characters
String
CONDITIONAL
Textual description of the acquirer response code for displaying on terminals.
Data can consist of any characters
String
CONDITIONAL
The ACI (Authorization Characteristics Indicator) returned by the issuer.
Data can consist of any characters
String
CONDITIONAL
The System Trace Audit Number is assigned by a transaction originator to assist in identifying a Card Transaction.
The trace number remains unchanged for the life of the Card Transaction.
Data can consist of any characters
String
CONDITIONAL
The local time, in HHMMSS format, during which the transaction occurred.
Data can consist of any characters
Time Offset
CONDITIONAL
The local time zone, in +hhmm or -hhmm format, in which the authorization was received from the acquirer, issuer or local terminal.
Data must comply with ISO 8601 UTC time offset format, +hhmm or -hhmm.
String
CONDITIONAL
Indicates the magnetic stripe condition and the vulnerability for fraud in Discover Network Card Transactions.
Data can consist of any characters
String
CONDITIONAL
The unique identifier for the transaction returned by the issuer.
Data can consist of any characters
Alphanumeric
CONDITIONAL
The Transaction Integrity Class (TIC) is an indicator defined by the scheme to evaluate the safety and security of the transaction.
The indicator is only supported by some schemes and for all regions.
Data may consist of the characters 0-9, a-z, A-Z
String
CONDITIONAL
The validation code returned by the issuer.
This value must be stored to be sent with the capture transaction.
Data can consist of any characters
String
CONDITIONAL
The response returned by the issuer indicating whether the 3DSecure authentication token was validated or not.
Data can consist of any characters
The amount and currency of available balance on the card.
Decimal
CONDITIONAL
The available balance on the card.
If provided, this is the amount available to the payer to spend after this payment.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Upper case alphabetic text
CONDITIONAL
The currency of available balance on the card expressed as an ISO 4217 alpha code, e.g. USD.
Data must consist of the characters A-Z
Information on the billing address including the contact details of the payer.
The payer's billing address.
This data may be used to qualify for better interchange rates on corporate purchase card transactions.
String
CONDITIONAL
The city portion of the address.
Data can consist of any characters
String
CONDITIONAL
The name of the company associated with this address.
Data can consist of any characters
Upper case alphabetic text
CONDITIONAL
The 3 letter ISO standard alpha country code of the address.
Data must consist of the characters A-Z
Alphanumeric + additional characters
CONDITIONAL
The post code or zip code of the address.
Data may consist of the characters 0-9, a-z, A-Z, ' ', '-'
String
CONDITIONAL
The state or province of the address.
Data can consist of any characters
String
CONDITIONAL
The three character ISO 3166-2 country subdivision code for the state or province of the address.
Providing this field might improve your payer experience for 3-D Secure payer authentication.
Data can consist of any characters
String
CONDITIONAL
The first line of the address.
For example, this may be the street name and number, or the Post Office Box details.
Data can consist of any characters
String
CONDITIONAL
The second line of the address (if provided).
Data can consist of any characters
Information used to manage interactions with the payment provider if you are offering your payment page on a website or are redirecting the payer's browser to the provider's website.
If you are offering your payment page in an app or are redirecting the payer to the provider's app, use the appPayment parameter group.
The payer's consent for different operations as captured by you.
For example, the consent can be for storing account details for recurring transactions or token generation, or for using account details while refunding a previous transaction etc.
Boolean
CONDITIONAL
This indicates the payer's consent as recorded by the Merchant to store the account details in the gateway.
The values 'true' or 'false'. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#boolean.)
Provides details about the interaction of your system and the providers system when initiating the browser payment, redirecting the customer's browser to the provider's system, back to the merchant's website and completing the browser payment.
Enumeration
ALWAYS PROVIDED
The status of the interaction between the merchant's system and the payment provider's system.
Defines the interaction state of the transaction.
Value must be a member of the following list. The values are case sensitive.
COMPLETED
This browser payment has been completed, i.e. the gateway has been informed about the payment result.
INITIATED
This browser payment has successfully been initiated.
REDIRECTED_TO_PROVIDER
The payer's browser has been redirected to the payment provider's website.
RETURNED_TO_MERCHANT
The payer's browser has been redirected back from the payment provider's website to the merchant's website.
ASCII Text
CONDITIONAL
The date and time the browser payment was completed, i.e. the gateway has been informed about the payment result.
Data consists of ASCII characters
ASCII Text
CONDITIONAL
The date and time the browser payment was initiated.
Provided only, if initiating the browser payment was successful (response.gatewayCode=SUBMITTED).
Data consists of ASCII characters
ASCII Text
CONDITIONAL
The date and time the customer's browser was received from the merchant's website and redirected to the provider's website.
Data consists of ASCII characters
ASCII Text
CONDITIONAL
The date and time the customer's browser was received from the provider's website and redirected back to the merchant's website.
Data consists of ASCII characters
String
CONDITIONAL
The language that you prefer the payment provider to use for pages displayed to the payer.
You can provide either the two-letter primary language tag (for example, en, fr) or the two-letter primary language tag plus the region sub-tag (for example, en-US, fr-CA).
Data must be a language identifier or IETF language tag
Additional information you can provide to control the user interaction flow presented to the payer by Open Banking.
Boolean
ALWAYS PROVIDED
Indicates during the checkout flow whether payer has provided consent for refund in order to store payer account details in the gateway.
The values 'true' or 'false'. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#boolean.)
Enumeration
CONDITIONAL
The type of transaction you want to create for this payment.
Value must be a member of the following list. The values are case sensitive.
ACCOUNTSETUP
The transaction created in the gateway is an ACCOUNT SETUP transaction.
AUTHORIZE
The transaction created in the gateway is an AUTHORIZATION transaction.
PAY
The transaction created in the gateway is a PAYMENT transaction.
Additional information you can provide to control the user interaction flow presented to the payer by PayPal.
String
CONDITIONAL
The ID provided to you by PayPal when you create a PayPal account.
This identifies you as the merchant in messages that the gateway submits to PayPal.
Data can consist of any characters
Boolean
CONDITIONAL
Indicates whether you want PayPal to display the shipping address to the payer on the PayPal website.
By default, the shipping address is displayed to the payer. For more detailed information about displaying the shipping address on the PayPal website, see PayPal Integration: Display/Override Shipping Address.
The values 'true' or 'false'. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#boolean.)
String
CONDITIONAL
PayPal's unique identifier for the interaction between the payer and PayPal.
Data can consist of any characters
Boolean
CONDITIONAL
Indicates whether you want to allow the payer to change the shipping address for the payment on the PayPal website.
By default, the payer is allowed to change the shipping address. For more detailed information about the payer overriding the shipping address on the PayPal website, see PayPal Integration: Display/Override Shipping Address.
The values 'true' or 'false'. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#boolean.)
Enumeration
CONDITIONAL
Indicates where in the checkout flow you want the payer to commit to the payment - on the PayPal website or on your website after returning from the PayPal website.
By default this is set to CONFIRM_AT_PROVIDER.
Value must be a member of the following list. The values are case sensitive.
CONFIRM_AT_MERCHANT
The payer commits to the payment on your website.
CONFIRM_AT_PROVIDER
The payer commits to the payment on the PayPal website.
Url
CONDITIONAL
The URL to which you must redirect the payer's browser to complete the payment when using the payment provider's website.
If you are redirecting the payer to the payment provider's app use appPayment.redirectUrl. If you want to present the payment provider's checkout flow in a modal window on top of your payment page, use the functions provided in the JavaScript library instead.
Ensure that this is a valid URL according to RFC 1738.
Url
CONDITIONAL
The URL of your website to which you want the payer's browser to be redirected on completing the payment interaction at the payment provider's website.
The same return URL will be used by the gateway to redirect the payer's browser irrespective of the success or otherwise of the payment interaction. This field is not required if the payer is to be redirected to your app or if the browser payment provider's checkout flow is presented on a modal window on top of your payment page.
Ensure that this is a valid URL according to RFC 1738.
This parameter group captures all information that has been generated by the gateway or third party service provider and will be used by them to help provide the services to you.
String
CONDITIONAL
The attribute name whose value is used by the gateway service or the third party service to identify the payer or their account or your account or any similar detail with them, and which facilitates them to offer their service to you.
Data can consist of any characters
String
CONDITIONAL
The attribute name whose value is used by the gateway service or the third party service to identify the payer or their account or your account or any similar detail with them, and which facilitates them to offer their service to you.
Data can consist of any characters
Information about any constraints that apply to this transaction.
Specify constraints to ensure that the transaction conforms to predefined criteria. This is useful if your integration does not directly collect all the transaction values (e.g. a session-based integration or a checkout integration).
Information about the payment plan constraints which apply for this transaction.
Specify payment plan constraints to restrict the available payment plan options for this transaction.
Integer
CONDITIONAL
The allowable number of deferral months for the payment plan.
A number comprising the digits 0-9, having at least one digit. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#nonNegativeInteger.)
Integer
CONDITIONAL
The allowable number of installments for the payment plan.
A number comprising the digits 0-9, having at least one digit. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#nonNegativeInteger.)
String
CONDITIONAL
The identifiers for the payment plans supported for this transaction.
If you wish to offer any payment plans to the payer, provide the plan identifiers in this field else pass it as empty.
See Payment Plans for the supported payment plans and their identifiers.
Data can consist of any characters
String
CONDITIONAL
A transient identifier for the request, that can be used to match the response to the request.
The value provided is not validated, does not persist in the gateway, and is returned as provided in the response to the request.
Data can consist of any characters
Information about the customer, including their contact details.
Email
CONDITIONAL
The email address of the customer.
The field format restriction ensures that the email address is longer than 3 characters and adheres to a generous subset of valid RFC 2822 email addresses.
Ensures that the email address is longer than 3 characters and adheres to a generous subset of valid RFC 2822 email addresses
String
CONDITIONAL
The payer's first name.
Data can consist of any characters
Identification of the payer.
This information is used to identify the sender in account funding transactions.
Upper case alphabetic text
CONDITIONAL
The ISO 3166 three-letter country code of the issuer of the identification.
Data must consist of the characters A-Z
Enumeration
CONDITIONAL
The type of identification provided for the customer.
Value must be a member of the following list. The values are case sensitive.
ALIEN_REGISTRATION_NUMBER
The customer's identification type is an alien registration number issued by U.S. Citizenship and Immigration Services (USCIS) to immigrants who apply to live in the United States.
BUSINESS_TAX_ID
The customer's identification type is a business tax id which is assigned to the business entity by the tax department.
COMPANY_REGISTRATION_NUMBER
The customer's identification type is company registration number which is issued to the company at the time of its incorporation.
CUSTOMER_IDENTIFICATION
The customer's identification type is an unspecified form of customer identification through which the customer can identified and verified.
DATE_OF_BIRTH
The customer's identification type is date of birth.
DRIVERS_LICENSE
The customer's identification type is a driving license.
EMAIL
The customer's identification type is an email address.
GOVERNMENT_ISSUED
The customer's identification type is government issued.
INDIVIDUAL_TAX_ID
The customer's identification type is an individual tax id which is assigned to the individual by the tax department.
LAW_ENFORCEMENT_IDENTIFICATION
The customer's identification type is a law enforcement identification.
MILITARY_IDENTIFICATION
The customer's identification type is a military identification which is issued by the department of defense and military.
NATIONAL_IDENTIFICATION_CARD
The customer's identification type is a national identification card issued by the customer's country.
OTHER
The customer's identification type cannot be classified using any of the other categories. This is the default value.
PASSPORT
The customer's identification type is a passport.
PHONE_NUMBER
The customer's identification type is a phone number.
PROXY_IDENTIFICATION
The customer's identification type is proxy identification.
SOCIAL_SECURITY_NUMBER
The customer's identification type is a social security number issued by Social Security Administration (SSA) to U.S. citizens, permanent residents and eligible non-immigrant workers in United States.
TRAVEL_IDENTIFICATION
The customer's identification type is travel document other than a passport.
String
CONDITIONAL
The identification value/number for the type of identification provided in customer.identification.type.
Data can consist of any characters
String
CONDITIONAL
The payer's last or surname.
Data can consist of any characters
String
CONDITIONAL
The payer's middle name.
Data can consist of any characters
String
CONDITIONAL
The contact person's mobile phone or cell phone number.
Data can consist of any characters
String
CONDITIONAL
The phone number of the person to whom the order is being billed.
Data can consist of any characters
String
CONDITIONAL
The tax registration identifier of the customer.
Data can consist of any characters
String
CONDITIONAL
An identifier for the payer assigned by a government authority.
For example, in Mexico this could be the CURP (Clave Única de Registro de Población), RFC (Registro Federal del Contribuyente), or INE (Instituto Nacional Electoral) number. In Brazil this could be the CPF (Cadastro de Pessoas Físicas) or CNPJ (Cadastro Nacional de Pessoas Jurídicas).
Data can consist of any characters
Additional details for debt repayment transactions (order.purchaseType=DEBT_REPAYMENT).
If your Merchant Category Code is 6012 (Merchandise and Services—Customer Financial Institutions) or 6051 ( (Non-Financial Institutions – Foreign Currency, Non-Fiat Currency)) you may be required to provide some or all the details in this parameter group.
Details about the recipient of the payment and the destination account for the payment.
String
ALWAYS PROVIDED
The account identifier for the payment recipient's account.
For payments into a card account provide the card number. For payments into other accounts (for example a bank account) provide the account number. The value provided will be returned masked in the response.
Data can consist of any characters
Date
ALWAYS PROVIDED
The date of birth of the primary payment recipient in yyyy-mm-dd format.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
String
ALWAYS PROVIDED
Last name of the primary payment recipient.
Data can consist of any characters
String
ALWAYS PROVIDED
Postcode of the primary payment recipient.
Data can consist of any characters
Information about the device used by the payer for this transaction.
String
CONDITIONAL
The telephone number captured by ANI (Automatic Number Identification) when the customer calls to place the order.
Data can consist of any characters
String
CONDITIONAL
The 2 digit ANI information identifier provided by the telephone company to indicate the call type, for example, cellular (61-63), toll free (24,25), etc.
Data can consist of any characters
String
CONDITIONAL
The User-Agent header of the browser the customer used to place the order.
For example, MOZILLA/4.0 (COMPATIBLE; MSIE 5.0; WINDOWS 95)
Data can consist of any characters
String
CONDITIONAL
The name of the server to which the customer is connected.
Data can consist of any characters
String
CONDITIONAL
The IP address of the device used by the payer, in IPv4 nnn.nnn.nnn.nnn format.
You can provide the IP address in IPv6 format as defined in RFC4291.
IPv6 address will only be used in EMV 3DS authentication. Supplied IPv6 address will not be used for any other purposes.
Data can consist of any characters
String
CONDITIONAL
The mobile phone manufacturer's identifier for the model of the mobile device used to initiate the payment.
Data can consist of any characters
Enumeration
CONDITIONAL
The interface through which the transaction is submitted to the gateway.
Value must be a member of the following list. The values are case sensitive.
AUTO
The transaction was automatically generated by the gateway. For example, a Capture transaction for Auto-Capture or an order reversal transaction for risk rejected orders.
BATCH
The transaction was submitted as part of a merchant batch. Batches can either be uploaded via Batch or via Merchant Administration.
CHECKOUT_VIA_WEBSITE
The transaction was created via checkout. The payer was redirected from your website to checkout.
MERCHANT_ADMINISTRATION
The transaction was initiated in Merchant Administration.
MERCHANT_MANAGER
The transaction was initiated in Merchant Manager.
SERVICE_PROVIDER_API
The transaction was reported by an acquirer or alternate payment provider.
WEB_SERVICES_API
The transaction was submitted via Web Services API.
Details about who initiated the transaction.
Details about the entity that initiated the transaction.
String
CONDITIONAL
The identifier of the entity that initiated the transaction.
For a merchant this is the Merchant ID in the gateway. For a Merchant Organization this is the Merchant Organization ID in the gateway. For an agent this is the Agent ID in the gateway. For a service provider this is the service provider ID in the gateway. For a gateway initiated transaction this field is not populated.
Data can consist of any characters
Enumeration
CONDITIONAL
The type of entity that initiated the transaction.
Value must be a member of the following list. The values are case sensitive.
AGENT
The transaction was initiated by an agent on your behalf.
GATEWAY
The transaction was automatically initiated by the gateway on your behalf.
MERCHANT
You initiated the transaction.
MERCHANT_ORGANIZATION
The transaction was initiated by a Merchant Organization on your behalf.
SERVICE_PROVIDER
The transaction was initiated by your payment service provider on your behalf.
String
CONDITIONAL
The person who initiated this transaction.
For Merchant Administration, the person is identified by their logon name.
Data can consist of any characters
String
CONDITIONAL
Your payment service provider might have configured your merchant profile to support several lines of business.
Each line of business can have different payment parameters, such as bank account, supported cards or such.
For example, lineOfBusiness = TICKET_SALES can have a different bank account from lineOfBusiness = MERCHANDISING. One line of business on your profile might be "null". To use that, do not provide the lineOfBusiness field.
Data can consist of any characters except space
Alphanumeric + additional characters
ALWAYS PROVIDED
The unique identifier issued to you by your payment provider.
This identifier can be up to 12 characters in length.
Data may consist of the characters 0-9, a-z, A-Z, '-', '_'
Information about the order associated with this transaction.
Decimal
ALWAYS PROVIDED
The total amount for the order. This is the net amount plus any merchant charge amounts.If you provide any sub-total amounts, then the sum of these amounts (order.itemAmount, order.taxAmount, order.shippingAndHandlingAmount, order.cashbackAmount, order.gratuityAmount, order.merchantCharge.amount and order.dutyAmount), minus the order.discountAmount must equal the net amount.
The value of this field in the response is zero if payer funds are not transferred.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Enumeration
CONDITIONAL
Indicates the result of payer authentication.
Value must be a member of the following list. The values are case sensitive.
AUTHENTICATION_ATTEMPTED
Payer authentication was attempted and a proof of authentication attempt was obtained.
AUTHENTICATION_AVAILABLE
Payer authentication is available for the payment method provided.
AUTHENTICATION_EXEMPT
Exemption from the Regulatory Technical Standards (RTS) requirements for Strong Customer Authentication (SCA) under the Payment Services Directive 2 (PSD2) regulations in the European Economic Area has been claimed or granted.
AUTHENTICATION_FAILED
The payer was not authenticated. You should not proceed with this transaction.
AUTHENTICATION_NOT_IN_EFFECT
There is no authentication information associated with this transaction.
AUTHENTICATION_NOT_SUPPORTED
The requested authentication method is not supported for this payment method.
AUTHENTICATION_PENDING
Payer authentication is pending completion of a challenge process.
AUTHENTICATION_REJECTED
The issuer rejected the authentication request and requested that you do not attempt authorization of a payment.
AUTHENTICATION_REQUIRED
Payer authentication is required for this payment, but was not provided.
AUTHENTICATION_SUCCESSFUL
The payer was successfully authenticated.
AUTHENTICATION_UNAVAILABLE
The payer was not able to be authenticated due to a technical or other issue.
Boolean
CONDITIONAL
Set this flag if the transaction is a manual cash disbursement transaction, i.e. cash is disbursed upon the acceptance of a card by a financial institution teller.
The values 'true' or 'false'. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#boolean.)
Decimal
CONDITIONAL
The amount the payer has chosen to receive as cash in addition to the amount they are paying for the goods or services they are purchasing from you.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Enumeration
CONDITIONAL
Indicates if you expect to capture the full order amount for which you are requesting authorization.
If you do not provide a value for order.certainty the default configured for you by your payment service provider will be used. The value provided in the response shows the value the gateway sent to the acquirer
Value must be a member of the following list. The values are case sensitive.
ESTIMATED
The amount authorized is an estimate of the amount that will be captured. It is possible that the amount captured will be less, or might not be captured at all.
FINAL
The full authorized amount is expected to be captured within the mandated time. The order will only be cancelled in exceptional circumstances (for example, the payer cancelled their purchase).
This value will be provided when a chargeback is successfully processed and funds have been transferred back to the payer.
Decimal
ALWAYS PROVIDED
The total amount that has been successfully debited from the merchant's account as a result of chargebacks against this order.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
String
ALWAYS PROVIDED
The currency of chargeback raised against this order that has been successfully debited from the merchant's account, expressed as an ISO 4217 alpha code, e.g. USD.
Data can consist of any characters
DateTime
ALWAYS PROVIDED
Indicates the date and time the gateway considers the order to have been created.
An instant in time expressed in ISO8601 date + time format - "YYYY-MM-DDThh:mm:ss.SSSZ"
Upper case alphabetic text
ALWAYS PROVIDED
The currency of the order expressed as an ISO 4217 alpha code, e.g. USD.
Data must consist of the characters A-Z
String
CONDITIONAL
A field you provide to capture additional information about this order that is only of interest to you.
The gateway does not send this information to the acquirer. A maximum of 50 such fields may be added to the order.
Data can consist of any characters
String
CONDITIONAL
A note from the payer about this order.
Data can consist of any characters
Date
CONDITIONAL
The date the payer placed the order.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd.
ASCII Text
CONDITIONAL
The payer's own reference for the order.
This reference may assist the payer to identify the order in their system. For example, a purchase order number, project identifier, or cost center.
Data consists of ASCII characters
String
CONDITIONAL
Short textual description of the contents of the order.
Data can consist of any characters
Information about a price reduction you have applied to the order.
For example, you may apply discounts for trade, employees, bulk purchase, or a sales promotion.
Decimal
CONDITIONAL
The total amount of the discount you have applied to the order.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
String
CONDITIONAL
The code you use to identify the reason for the discount.
Data can consist of any characters
String
CONDITIONAL
A description of your reason for the discount.
Data can consist of any characters
Decimal
CONDITIONAL
The duty amount (also known as customs tax, tariff or dues) for the order.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Integer
CONDITIONAL
The field indicates the total number of Capture requests you intend to submit for an order.
For example, if you intend to deliver the goods in two shipments and will capture part of the total authorized amount when you make each shipment, set the value of this field to 2.
If the value equals or drops below the actual number of successful Captures, then the gateway will prevent further Captures and void the outstanding Authorization amount (depending on your merchant profile configuration). If you are unsure of the number of Captures, set the value to 99, and to one on your last Capture.
If you do not provided a value for this field, but had previously provided one, the previous value is applied. For example, if you provide a value 2 on the first Capture for the order and then submit a second Capture without a value, the gateway assumes that the value is still 2.
A number comprising the digits 0-9, having at least one digit. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#nonNegativeInteger.)
Details of the amount settled to your account for this order.
Decimal
ALWAYS PROVIDED
The total amount of money funded to / from your bank account for this order, as reported to the gateway by your acquirer.
This includes sales (credits to your account) and refunds (debits).
See order.fundingStatus to determine the certainty of this value.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Upper case alphabetic text
ALWAYS PROVIDED
The currency of order.funding.amount, expressed as an ISO 4217 alpha code, e.g. USD.
Data must consist of the characters A-Z
Enumeration
CONDITIONAL
The current status of funding for the money that you can reasonably expect for this order.
It reflects both money into and out of your bank account (that is, both sales and refunds).
When considering funding status, the gateway only examines transactions that can move funds. For example, it ignores Authorizations and declined Captures. This is because fundingStatus reflects the movement of the money for the commercial transaction, it does not reflect the movement of money for fees associated with the transaction.
Value must be a member of the following list. The values are case sensitive.
FUNDED
All transactions that could transfer money to / from your account are clearing and will settle.
FUNDING_ASSURED
All transactions that could transfer money to / from your account, are guaranteed to settle, but have not yet done so. The exact amount of the funds to be transferred might not be known in this state.
FUNDING_FAILED
There are transactions on the order that could result in the transfer of money to / from your account, however the service provider has not yet received funds from the payer. In case of an order with a refund the service provider was not able to return funds to the payer. You might need to contact the payer to unblock this condition.
FUNDING_ON_HOLD
There are transactions on the order that could result in the transfer of money to or from your account, however the service provider is unable to complete the transfer of funds, because of some problem with your account. This might be a transient state.
IN_PROGRESS
There are transactions on the order that could result in the transfer of money to / from your account, but some have not yet have done so. This is usually a transient state.
NON_FUNDED
There are no transactions on the order that could result in transfer of money to / from your account.
NOT_SUPPORTED
All transactions on the order were settled to a payment provider from which the gateway does not receive funding information.
Decimal
CONDITIONAL
The amount the payer has chosen to provide as a gratuity or tip in addition to the amount they are paying for the goods or services they are purchasing from you.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
String
ALWAYS PROVIDED
A unique identifier for this order to distinguish it from any other order you create.
Use this identifier when referring to this order in subsequent transactions and in retrieval operations. This value must be unique for every order created by your merchant profile.
Data can consist of any characters
Enumeration
CONDITIONAL
This field is used to classify merchant initiated payments which are submitted in the context of certain industry practices.
Use this field to indicate the reason for that industry practice payment.
A merchant initiated industry practice transaction must also contain the 'scheme transaction Id' from the associated cardholder initiated transaction.
You can provide the referenceOrderId of the relevant cardholder initiated transaction and the gateway will include the 'scheme transaction Id' on the industry practice transaction. For example, when you submit a 'delayed charge', you should provide the referenceOrderId of the cardholder-initiated transaction that resulted in the delayed charge.
Alternatively, you can provide the 'scheme transaction Id' of the cardholder initiated transaction in the industry practice transaction using the field transaction.acquirer.traceId.
You must have obtained the payer's consent prior to submitting industry practice transactions.
Value must be a member of the following list. The values are case sensitive.
DELAYED_CHARGE
An additional payment processed in accordance with your terms and conditions after the original payment has been processed. For example, hotel mini bar charge after the payer has checked out or damage to a rental car.
NO_SHOW_PENALTY
A penalty charged in accordance with your charge cancellation policy the payer cancels or fails to show for the booking.
PARTIAL_SHIPMENT
A shipment where merchant decides to ship the goods from the same order in multiple shipments due to various reasons like goods availability, involvement of multiple suppliers for goods etc.
String
CONDITIONAL
The invoice number you issued for this order.
Data can consist of any characters
Information about the items the payer purchases with the order.
String
CONDITIONAL
The brand of the item.
For example, Dell.
Data can consist of any characters
String
CONDITIONAL
Your category for the item.
Data can consist of any characters
String
CONDITIONAL
Description for the item with information such as size, color, etc.
For example, 'Color:Red, Size:M'
Data can consist of any characters
Only use this parameter group to provide additional line item details required for a better interchange rate for Purchasing Cards, Business and/or Corporate Cards (Level 3).
Check with your payment service provider if Level 3 data is supported for your acquirer.
JSON Text
CONDITIONAL
Use this field to provide line item details that your acquirer requires you to provide.
Data must be provided in JSON format using the record name and field name (separated by a comma) to identify the value provided. Contact your payment service provider for details about the supported fields including the field definitions.
Data is valid Json Format
Integer
CONDITIONAL
A code describing a commodity or a group of commodities pertaining to goods classification.
A number comprising the digits 0-9, having at least one digit. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#nonNegativeInteger.)
Information about the taxes per line item.
Decimal
CONDITIONAL
The tax amount for the tax type defined in order.item[n].detail.tax[m].type for the item.
Note that the tax amount provided must reflect the tax amount applied before a discount was applied.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Decimal
CONDITIONAL
The tax rate (percentage) applied to the item for the tax type defined in order.item[n].detail.tax[m].type.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
String
CONDITIONAL
The tax type for which the amount specified under order.item[n].detail.tax[m].amount has been paid for this item.
The correct value as used by your acquirer may have to be provided. Contact your payment service provider for details.
Data can consist of any characters
Decimal
CONDITIONAL
The discount rate (percentage) applied to this item.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Decimal
CONDITIONAL
The tax rate (percentage) of the tax charged for this item.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
String
CONDITIONAL
The type of tax charged for this item.
The correct value as used by your acquirer may have to be provided. Contact your payment service provider for details.
Data can consist of any characters
Integer
CONDITIONAL
The United Nations Standard Products and Services Code (UNSPSC) for the item.
A number comprising the digits 0-9, having at least one digit. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#nonNegativeInteger.)
Integer
CONDITIONAL
The Universal Product Code (UPC) for the item.
A number comprising the digits 0-9, having at least one digit. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#nonNegativeInteger.)
Enumeration
CONDITIONAL
Provide the industryCategory to send this line item to your acquirer for specialized processing as industry data.
Such processing might have legal obligations, which are your responsibility. Do not provide an industryCategory, unless you are certain it applies to you, and is accepted by your acquirer.
We support the following industry standard processing:US health care processing using the IIAS standard.The supported values for industryCategory are:HEALTHCARE_VISION, HEALTHCARE_DENTAL, HEALTHCARE_PRESCRIPTION, HEALTHCARE_OTHERWe formulate an IIAS message by summing the amounts of all the line items having the same industryCategory. The amount of a line item is:(order.item.unitPrice + order.item.tax) * order.item.quantity
Value must be a member of the following list. The values are case sensitive.
HEALTHCARE_DENTAL
HEALTHCARE_OTHER
HEALTHCARE_PRESCRIPTION
HEALTHCARE_VISION
String
ALWAYS PROVIDED
A short name describing the item.
Data can consist of any characters
Decimal
ALWAYS PROVIDED
The quantity of the item.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
String
CONDITIONAL
The SKU (Stock Keeping Unit) or the item identifier for this item.
Data can consist of any characters
Decimal
CONDITIONAL
The discount amount applied to this item.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
String
CONDITIONAL
The unit of measure used for the item quantity.
The correct value as used by your acquirer may have to be provided. Contact your payment service provider for details.
Data can consist of any characters
Decimal
ALWAYS PROVIDED
The cost price for the item.
This amount is multiplied with the item quantity (item.quantity) to determine the total amount for this item (item.amount). This amount does not include the tax amount and/or discount amount applicable to this item.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Decimal
CONDITIONAL
The tax amount for the item.
This amount is multiplied with the item quantity (item.quantity) to determine the total tax amount for this item.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Decimal
CONDITIONAL
The total item amount for the order.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
DateTime
ALWAYS PROVIDED
Indicates the date and time the gateway considers the order to have last been updated.
An instant in time expressed in ISO8601 date + time format - "YYYY-MM-DDThh:mm:ss.SSSZ"
String
CONDITIONAL
Your tax registration identifier provided by the Local/State/Province tax authority.
If you are a Canadian merchant, use this field to provide your Tax Registration ID for paying Provincial Sales Tax (PST).
Data can consist of any characters
Use this parameter group to provide additional information if you are a marketplace.You are considered a marketplace if you operate an electronic commerce website or mobile application that brings together payers and retailers and you are selling the goods or services on behalf of the retailer.In this case, the card schemes may require you to register with them as a marketplace and assign you a Marketplace ID.
You should provide this identifier to your payment service provider so that the gateway can automatically include it in all transaction messages to your acquirer.
Enumeration
CONDITIONAL
Provide information about the location of the retailers for goods or services included in this order.Where a retailer is located in a country different from your country, they are considered a foreign retailer, otherwise they are considered a domestic retailer.
Value must be a member of the following list. The values are case sensitive.
DOMESTIC_ONLY
The order only contains items from domestic retailers.
FOREIGN_AND_DOMESTIC
The order contains items from both foreign and domestic retailers.
FOREIGN_ONLY
The order only contains items from foreign retailers.
Decimal
ALWAYS PROVIDED
The total amount for the order in order.merchantCurrency units.
This is derived from the rate quote and order.amount for this order when Multi-Currency Pricing was used.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Digits
CONDITIONAL
A 4-digit code used to classify your business by the type of goods or services it offers.This is also known as the Merchant Category Code (MCC).
You only need to provide the MCC if you want to override the default value configured for your acquirer link.The value you provide must match one of those configured by your payment service provider.
Data is a string that consists of the characters 0-9.
Information about additional fees that you are charging the payer for processing the payment for this order, for example, a surcharge.
Decimal
ALWAYS PROVIDED
The amount of the additional fee that you are charging the payer.
If you provide a charge amount, you must include it in the total amount for the order.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Enumeration
ALWAYS PROVIDED
Indicates who calculated the charge amount.
Value must be a member of the following list. The values are case sensitive.
CLIENT
The charge amount was included in the transaction request.
GATEWAY
The gateway calculated the charge amount based on the net amount included in the transaction request and the configured charge rules.
String
CONDITIONAL
Where the gateway has generated the charge amount based on the configured charge rules, this field contains the name of the rule.
Data can consist of any characters
Enumeration
ALWAYS PROVIDED
The type of the additional fee that you are charging the payer.
Value must be a member of the following list. The values are case sensitive.
SURCHARGE
A fee that covers your cost of accepting accepting a payment method.
Upper case alphabetic text
ALWAYS PROVIDED
The currency in which you priced your inventory for this order, expressed as an ISO 4217 alpha code, e.g. USD.
This value (along with merchantAmount) is applicable if you are doing Multi-Currency Pricing, as it gives you a consistent currency across all your orders that involve foreign exchange (FX).
If there is FX on this order, this is based on the rate quote you provided on the payment transactions, if not then this is the order.currency.
Data must consist of the characters A-Z
Digits
CONDITIONAL
The code that represents a partnership agreement, between you and the issuer.
Data is a string that consists of the characters 0-9.
Decimal
CONDITIONAL
The amount payable for the order before merchant charge amount is applied.
If you specify a net amount the gateway will calculate the merchant charge amount for you based on the charge type (order.merchantCharge.type) provided in the request. Alternatively, you can specify the merchant charge amount (order.merchantCharge.amount) yourself.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Url
CONDITIONAL
The URL to which the gateway will send Webhook notifications when an order is created or updated.
To receive notifications at this URL, you must enable Webhook notifications in Merchant Administration. Ensure the URL is HTTPS
Ensure that this is a valid URL according to RFC 1738.
String
CONDITIONAL
Your identifier for the part of your organization that is responsible for the order.
You might provide this data when you want to track the accountability for the order. For example, store number, sales region, branch, or profit center
Data can consist of any characters
Enumeration
CONDITIONAL
Indicates the purchase of specific types of goods or services.
You must provide a value if your Merchant Category Code (MCC) is one of the following:
6051 (Quasi Cash – Merchant or Non-Financial Institutions – Foreign Currency, Non-Fiat Currency) and this transaction is for the purchase of cryptocurrency. Set the value to CRYPTOCURRENCY.
6211 (Securities – Brokers/Dealers) and this transaction is for the purchase of high-risk securities. Set the value to HIGH_RISK_SECURITIES.
6012 (Merchandise and Services—Customer Financial Institutions) or 6051 (Non-Financial Institutions – Foreign Currency, Non-Fiat Currency) and this transaction is for debt repayment. Set the value to DEBT_REPAYMENT.
If the transaction pulls money from an account for the purpose of crediting another account you must set purchase type to ACCOUNT_FUNDING.
You may set purchase type to OTHER for any other type of payment.
Value must be a member of the following list. The values are case sensitive.
ACCOUNT_FUNDING
The transaction pulls money from an account for the purpose of crediting another account. You may be required to provide additional details about the account funding transaction in the accountFunding parameter group.
CRYPTOCURRENCY
The transaction is for the purchase of a cryptocurrency.
DEBT_REPAYMENT
You may be required to provide additional details about the debt repayment in the debtRepayment parameter group.
HIGH_RISK_SECURITIES
The transaction is for the purchase of high-risk securities.
OTHER
Use this value if the purchase type for the transaction does not fit in any of the other categories.
String
CONDITIONAL
An optional identifier for the order.
For example, a shopping cart number, an order number, or an invoice number.
Data can consist of any characters
String
CONDITIONAL
The name of the person who requested the goods or services.
Data can consist of any characters
Information about reward points earned using a card enrolled in a rewards program that are being redeemed as full or part payment for this order.
Decimal
CONDITIONAL
The amount that the payer has chosen to pay by redeeming reward points earned using a card enrolled in a rewards program for full or part payment for this purchase.
The reward amount is included in the total amount of the order you provide in order.amount. You must provide this value if the rewards program supports a payer-nominated amount (availableBalance.reward.payerNominatedAmount returned from the Balance Inquiry operation has a value of 'true').
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Information about the rewards currently available to redeem for the card (that is, after this purchase).
Decimal
CONDITIONAL
The amount currently available to spend by redeeming rewards available for the card.
This amount is the rewards points available for the card divided by the conversion rate. For example, if the payer has 1500 points available and the conversion rate is 10 then the currency equivalent amount is 150.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Decimal
CONDITIONAL
The rewards value (points) currently available to redeem using the card.
This includes any points earned by the payer as a result of the payment made for this order. You should print this value on the receipt when required by the rewards program provider.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Decimal
ALWAYS PROVIDED
The rewards value (points) that the payer has redeemed as full or part payment for this order.
You should print this value on the receipt when required by the rewards program provider.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Information about the rewards available to redeem for this card prior to the last transaction on this order where points were redeemed.
Decimal
CONDITIONAL
The rewards value available to redeem using the card prior to the last transaction on this order where points were redeemed.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Decimal
CONDITIONAL
The rewards value (points) available to redeem using the card prior to the last transaction on this order where points were redeemed.
You should print this value on the receipt when required by the rewards program provider.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Enumeration
CONDITIONAL
The rewards program for which a rewards amount (points) were redeemed for this Authorization.
Value must be a member of the following list. The values are case sensitive.
AMERICAN_EXPRESS_MEMBERSHIP_REWARDS
American Express Membership Rewards.
BANCOMER_MEMBERSHIP_REWARDS
Bancomer Membership Rewards.
Decimal
CONDITIONAL
The total shipping and handling amount for the order, including taxes on the shipping and/or handling.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Decimal
CONDITIONAL
The tax amount levied on the shipping and handling amount for the order.
This amount is included in the shipping and handling amount provided in field order.shippingAndHandlingAmount.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Decimal
CONDITIONAL
The tax rate applied to the shipping and handling amount for the order to determine the shipping and handling tax amount.
For a tax rate of 2.5% provide 0.025.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Contact information provided by you for printing on payer's account statements.
Descriptor address of the merchant.
String
CONDITIONAL
The city portion of the address.
Data can consist of any characters
String
CONDITIONAL
The name of the company associated with this address.
Data can consist of any characters
Upper case alphabetic text
CONDITIONAL
The 3 letter ISO standard alpha country code of the address.
Data must consist of the characters A-Z
Alphanumeric + additional characters
CONDITIONAL
The post code or zip code of the address.
Data may consist of the characters 0-9, a-z, A-Z, ' ', '-'
String
CONDITIONAL
The state or province code of the address.
For an address in the United States provide the 2-letter ISO 3166-2 state code. For US military bases provide one of AE, AA, AP.
For an address in Canada provide the 2-letter ISO 3166-2 province code.
Data can consist of any characters
String
CONDITIONAL
The first line of the address.
For example, this may be the street name and number, or the Post Office Box details.
Data can consist of any characters
String
CONDITIONAL
The second line of the address (if provided).
Data can consist of any characters
String
CONDITIONAL
Descriptor name of the merchant.
Data can consist of any characters
String
CONDITIONAL
Descriptor phone number of the merchant's business.
Data can consist of any characters
Url
CONDITIONAL
The URL of the merchant's descriptor website.
Ensure that this is a valid URL according to RFC 1738.
Enumeration
CONDITIONAL
The current progression of this order through the payment process.
Value must be a member of the following list. The values are case sensitive.
AUTHENTICATED
The payer was successfully authenticated.
AUTHENTICATION_INITIATED
Payer authentication has been initiated but not completed.
AUTHENTICATION_NOT_NEEDED
Payer authentication was not performed as it was not needed.
AUTHENTICATION_UNSUCCESSFUL
Payer authentication was not able to be successfully completed.
AUTHORIZED
The payment has been authorized successfully but the authorized amount has not yet been captured, in part, full, or excess.
CANCELLED
The initial transaction for this order has been voided successfully.
CAPTURED
The authorized amount for this order, in full or excess, has been captured successfully.
CHARGEBACK_PROCESSED
A Chargeback has been processed against this order.
DISBURSED
The order amount has successfully been disbursed to the payer.
DISPUTED
The payment has been disputed and is under investigation. A request for information has been received or a chargeback is pending.
EXCESSIVELY_REFUNDED
The payment has been captured in part, full, or excess, but the captured amount in excess has been refunded successfully.
FAILED
The payment has not been successful.
FUNDING
The order transfers money to or from the merchant, without the involvement of a payer. For example, recording monthly merchant service fees from your payment service provider.
INITIATED
A browser payment that has successfully been initiated for this order. No payment has yet been made.
PARTIALLY_CAPTURED
The authorized amount for this order, in part, has been captured successfully.
PARTIALLY_REFUNDED
The payment has been captured in part, full, or excess, but the captured amount in part has been refunded successfully.
REFUNDED
The payment has been captured in part, full, or excess, but the captured amount in full has been refunded successfully.
REFUND_REQUESTED
A refund against captured amounts on this order has been requested but not executed. Requires further action to approve the refund.
VERIFIED
The card details for this order have successfully been verified. No payment has yet been initiated or made.
Information about orders for items not yet available (pre-order) or for items previously purchased (reorder).
Boolean
CONDITIONAL
Indicates that the purchase includes merchandise with a future availability or release date.
The values 'true' or 'false'. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#boolean.)
Date
CONDITIONAL
The date that preordered items are expected to be available.
Provide this field if the payer is ordering items before you have them available for purchase.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
Boolean
CONDITIONAL
Indicates that the purchase includes merchandise that the payer has previously ordered.
The values 'true' or 'false'. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#boolean.)
Decimal
CONDITIONAL
A fee charged by you to cover the cost of accepting a payment method.
This is an additional amount charged by you for accepting one payment method (e.g. a credit card) instead of another (e.g. cash).
If you provide a surcharge amount, you should include it in the total amount for the order.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Enumeration
CONDITIONAL
Indicates how the surcharge amount was determined for an order.
Value must be a member of the following list. The values are case sensitive.
CLIENT
The surcharge amount was provided by the merchant.
GATEWAY
The surcharge amount was calculated by the gateway based on surcharging rules configured by the merchant.
Use this parameter group to provide a breakdown of tax types, amount per tax type, and rate per tax type included in order.taxAmount.
Decimal
CONDITIONAL
The tax amount included in this order for the tax type.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Decimal
CONDITIONAL
The tax rate (percentage) used to determine the tax amount included in this order for the tax type.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
String
CONDITIONAL
The type of tax included in the order amount.
The correct value as used by your acquirer may have to be provided. Contact your payment service provider for details.
Data can consist of any characters
Decimal
CONDITIONAL
The total tax amount for the order.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
String
CONDITIONAL
Your tax registration identifier provided by the Federal/National tax authority (for example, federal tax identification number, ABN).
If you are a Canadian merchant, use this field to provide your Tax Registration ID for paying Harmonized Sales Tax (HST) or Goods and Services Tax (GST) collected by the Canada Revenue Agency.
Data can consist of any characters
String
CONDITIONAL
Indicates your tax status for this order.
Data can consist of any characters
Decimal
ALWAYS PROVIDED
The amount that has been successfully authorized for this order.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Decimal
ALWAYS PROVIDED
The amount that has been successfully captured for this order.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Decimal
ALWAYS PROVIDED
The amount that has been successfully disbursed for this order.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Decimal
ALWAYS PROVIDED
The amount that has been successfully refunded for this order.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Information relevant for Transaction Filtering.
Allows you to provide the Address Verification Service (AVS) Response Code Transaction Filtering rules to be applied to the transactions for this order.
If provided, these rules override the AVS Response Code Transaction Filtering rules you have configured in Merchant Administration.
Enumeration
ALWAYS PROVIDED
The action to be performed for the Address Verification Service (AVS) Response Code.
Value must be a member of the following list. The values are case sensitive.
NO_ACTION
No action should be taken by the gateway.
REJECT
The gateway must reject the transaction.
REVIEW
The gateway must mark this transaction as requiring a review.
Enumeration
ALWAYS PROVIDED
The Address Verification Service (AVS) Response Code for which you are defining the rule.
Value must be a member of the following list. The values are case sensitive.
ADDRESS_MATCH
Street address matched
ADDRESS_ZIP_MATCH
Street address and zip/postcode were matched
NAME_ADDRESS_MATCH
Card holder name and street address matched
NAME_MATCH
Card holder name matched
NAME_ZIP_MATCH
Card holder name and zip/postcode matched
NOT_AVAILABLE
No data available from issuer or AVS data not supported for transaction
NOT_REQUESTED
AVS not requested
NOT_VERIFIED
AVS could not be verified for an international transaction
NO_MATCH
No match
SERVICE_NOT_AVAILABLE_RETRY
Issuer system is unavailable. Retry can be attempted
SERVICE_NOT_SUPPORTED
Service currently not supported by acquirer or merchant
ZIP_MATCH
Zip/postcode matched. Street address not matched
Information about payments that transfer money to another store of value, such as a gift card or gaming chips.
Enumeration
CONDITIONAL
The type of value store to which money is being transferred.
The default value is NOT_A_TRANSFER.
Value must be a member of the following list. The values are case sensitive.
ACCOUNT_FUNDING
Payment to add funds to the payer's account with the merchant. These funds can be used for future purchases.
NOT_A_TRANSFER
This payment is not for the purpose of transferring money to another store of value. It is a payment for goods or services.
PREPAID_LOAD
Payment to add funds to a prepaid card or gift card.
QUASI_CASH_TRANSACTION
Payment for items that are directly convertible to cash. For example, money orders, casino gaming chips, or traveller's checks.
Decimal
CONDITIONAL
The amount of money being transferred, in units of order.valueTransfer.currency.
The default value is order.amount
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Upper case alphabetic text
CONDITIONAL
The currency of the store.
If the money is being transferred to multiple currencies, then use the currency of the highest transferred value.
The default value is order.currency.
Data must consist of the characters A-Z
Integer
CONDITIONAL
The number of prepaid or gift card being purchased.
The default value is one when you set order.valueTransfer.accountType = PREPAID_LOAD. For all other values of order.valueTransfer.accountType the default is zero.
A number comprising the digits 0-9, having at least one digit. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#nonNegativeInteger.)
Details about a wallet interaction.
Details about the Secure Remote Commerce (SRC) wallet interaction.
String
CONDITIONAL
For orders where the payer's payment details were collected using Secure Remote Commerce (SRC), this field contains the unique identifier for the interaction between the payer and the SRC system used in this transaction.
The relevant SRC system is identified by the field sourceOfFunds.provided.card.scheme .
Data can consist of any characters
Provide the details for the Visa Checkout Wallet.
String
CONDITIONAL
For orders where the payer's payment details were collected using Visa Checkout, this field contains the unique identifier for the interaction between the payer and Visa Checkout.
Data can consist of any characters
String
CONDITIONAL
If, when integrating with the gateway, you are using a solution (e.g. a shopping cart or e-commerce solution) provided, supported or certified by your payment service provider, enter the solution ID issued by your payment service provider here.
If your payment service provider has not provided you with a solution ID, you should ignore this field.
Data can consist of any characters
Enumeration
CONDITIONAL
Indicates if the payer provided consent for storing the payment details they have provided for this payment.
Value must be a member of the following list. The values are case sensitive.
MERCHANT_INITIATED_PAYMENTS
The payer has provided consent for storing their card details for the purpose of subsequent merchant-initiated payments.
PAYER_DECLINED
The payer declined to provide consent for storing their card details.
PAYER_INITIATED_PAYMENTS
The payer has provided consent for storing their card details for the purpose of subsequent payer-initiated payments.
String
CONDITIONAL
This is the reference to an order previously submitted by you to the gateway.
It is applicable to the following scenarios.
Tokenization requests:
Identifier for the order which will be used to generate a gateway token. The gateway will attempt tokenization of payment credentials linked to the order ID.
The order identifier provided in this field must be linked to a successfully processed order which has card (FPAN / DPAN) as the payment method.
When providing this field, you must not provide card details in the sourceOfFunds.provided.card parameter group.
Payment transactions:
When submitting:
- an industry practice payment, this is the reference to the initial cardholder-initiated transaction.
- a resubmission transaction, this is the reference to the order which is being resubmitted.
Data can consist of any characters
If the gateway submitted a request to the scheme's Account Updater service, this parameter group contains details about the outcome of this request.
Enumeration
CONDITIONAL
Code generated by the gateway that indicates if the card details were updated by Account Updater before the transaction was submitted to the acquirer for processing.
If response.accountUpdater.gatewayCode=UPDATED, invoke the Retrieve Token request to check if a replacement token has been generated. This step is not required to be completed immediately.
The gateway assigns a replacement token, if your token repository is configured with the 'UNIQUE_ACCOUNT_IDENTIFIER' token management strategy and the repository already contains a token for the new card that was updated by the Account Updater.
For more details see Gateway Tokenization
Value must be a member of the following list. The values are case sensitive.
NOT_UPDATED
The card details were not updated.
UPDATED
The card details were updated and these details were used to process the transaction request and are contained in the sourceOfFunds parameter group. The token contained in the request has also been updated with these details.
ASCII Text
CONDITIONAL
Value as generated by the acquirer that summarizes the success or otherwise of the proposed operation.
Data consists of ASCII characters
ASCII Text
CONDITIONAL
The response from the acquirer in the text form.
This field is used in addition to response.acquirerCode for some acquirers where additional information needs to be communicated. For example, contact details to allow the merchant to contact the issuer directly to seek authorisation for the transaction.
Data consists of ASCII characters
Alphanumeric
CONDITIONAL
Authentication Token verification result code provided by the card scheme in the field sourceOfFunds.provided.card.brand
This code is known by various names according to the relevant scheme.
e.g. Discover ProtectBuy - CAVV(Cardholder Authentication Verification Value)
Data may consist of the characters 0-9, a-z, A-Z
Enumeration
CONDITIONAL
Code generated by the gateway that indicates the outcome of the verification of the authentication token by the issuer.
Value must be a member of the following list. The values are case sensitive.
FAILED
The authentication token has failed verification. This may affect the liability shift for this transaction. You may wish to cancel this transaction.
SUCCESS
The authentication token sent in the request has passed verification.
UNKNOWN
The issuer returned a value which does not indicate whether authentication token verification was successful or failed.
ASCII Text
CONDITIONAL
The acquirer CSC response code generated by the card issuing institution.
Data consists of ASCII characters
Enumeration
CONDITIONAL
The card security code result generated to indicate whether the data supplied matches the data held by the cardholder's issuing bank.
Value must be a member of the following list. The values are case sensitive.
MATCH
Valid or matched.
NOT_PRESENT
Merchant indicated CSC not present on card.
NOT_PROCESSED
Not processed.
NOT_SUPPORTED
Card issuer is not registered and/or certified
NO_MATCH
Invalid or not matched.
The result returned after the billing address provided by the cardholder has been compared with the address held at the cardholder's issuing bank.
ASCII Text
CONDITIONAL
The acquirer AVS response code generated by the card issuing institution.
Data consists of ASCII characters
Enumeration
CONDITIONAL
The address verification result generated to indicate whether the address data supplied matches the data held by the cardholder's issuing bank.
Value must be a member of the following list. The values are case sensitive.
ADDRESS_MATCH
Street address matched
ADDRESS_ZIP_MATCH
Street address and zip/postcode were matched
NAME_ADDRESS_MATCH
Card holder name and street address matched
NAME_MATCH
Card holder name matched
NAME_ZIP_MATCH
Card holder name and zip/postcode matched
NOT_AVAILABLE
No data available from issuer or AVS data not supported for transaction
NOT_REQUESTED
AVS not requested
NOT_VERIFIED
AVS could not be verified for an international transaction
NO_MATCH
No match
SERVICE_NOT_AVAILABLE_RETRY
Issuer system is unavailable. Retry can be attempted
SERVICE_NOT_SUPPORTED
Service currently not supported by acquirer or merchant
ZIP_MATCH
Zip/postcode matched. Street address not matched
Results of the additional verification checks where an acquirer offers advanced cardholder verification and the data has been supplied in the Verify request.
Enumeration
CONDITIONAL
The result returned after the specified data type has been verified by the acquirer.
Value must be a member of the following list. The values are case sensitive.
MATCHED
Data provided by cardholder matches record held by the cardholder's issuing bank.
NOT_CHECKED
Unable to perform verification checks on data provided.
NOT_MATCHED
Data provided by cardholder does NOT match record held by the cardholder's issuing bank.
NOT_PROVIDED
Verification could not be performed as data not provided.
SERVICE_NOT_AVAILABLE_RETRY
Issuer system is unavailable. Retry can be attempted
SERVICE_NOT_SUPPORTED
Service currently not supported by acquirer or merchant
Enumeration
CONDITIONAL
The data type which has been verified by the acquirer.
Value must be a member of the following list. The values are case sensitive.
BILLING_PHONE
The phone number of the person that the bill is being sent to.
BILLING_POSTCODE_ZIP
The Postal/Zip code of the billing address.
BILLING_STREET_ADDRESS
The street name and number of the billing address.
CARDHOLDER_NAME
The full name of the cardholder.
CUSTOMER_EMAIL
The email address of the customer.
String
CONDITIONAL
The container for additional information about a transaction.
Only returned for some errors and is dependent on the merchant's configuration. Returned in error, declined and approved scenarios, but would only be used to trouble shoot issues.
Data can consist of any characters
Enumeration
ALWAYS PROVIDED
Summary of the success or otherwise of the operation.
Value must be a member of the following list. The values are case sensitive.
ABORTED
Transaction aborted by payer
ACQUIRER_SYSTEM_ERROR
Acquirer system error occurred processing the transaction
APPROVED
Transaction Approved
APPROVED_AUTO
The transaction was automatically approved by the gateway. it was not submitted to the acquirer.
APPROVED_PENDING_SETTLEMENT
Transaction Approved - pending batch settlement
AUTHENTICATION_FAILED
Payer authentication failed
AUTHENTICATION_IN_PROGRESS
The operation determined that payer authentication is possible for the given card, but this has not been completed, and requires further action by the merchant to proceed.
BALANCE_AVAILABLE
A balance amount is available for the card, and the payer can redeem points.
BALANCE_UNKNOWN
A balance amount might be available for the card. Points redemption should be offered to the payer.
BLOCKED
Transaction blocked due to Risk or 3D Secure blocking rules
CANCELLED
Transaction cancelled by payer
DECLINED
The requested operation was not successful. For example, a payment was declined by issuer or payer authentication was not able to be successfully completed.
DECLINED_AVS
Transaction declined due to address verification
DECLINED_AVS_CSC
Transaction declined due to address verification and card security code
DECLINED_CSC
Transaction declined due to card security code
DECLINED_DO_NOT_CONTACT
Transaction declined - do not contact issuer
DECLINED_INVALID_PIN
Transaction declined due to invalid PIN
DECLINED_PAYMENT_PLAN
Transaction declined due to payment plan
DECLINED_PIN_REQUIRED
Transaction declined due to PIN required
DEFERRED_TRANSACTION_RECEIVED
Deferred transaction received and awaiting processing
DUPLICATE_BATCH
Transaction declined due to duplicate batch
EXCEEDED_RETRY_LIMIT
Transaction retry limit exceeded
EXPIRED_CARD
Transaction declined due to expired card
INSUFFICIENT_FUNDS
Transaction declined due to insufficient funds
INVALID_CSC
Invalid card security code
LOCK_FAILURE
Order locked - another transaction is in progress for this order
NOT_ENROLLED_3D_SECURE
Card holder is not enrolled in 3D Secure
NOT_SUPPORTED
Transaction type not supported
NO_BALANCE
A balance amount is not available for the card. The payer cannot redeem points.
PARTIALLY_APPROVED
The transaction was approved for a lesser amount than requested. The approved amount is returned in order.totalAuthorizedAmount.
PENDING
Transaction is pending
REFERRED
Transaction declined - refer to issuer
SUBMITTED
The transaction has successfully been created in the gateway. It is either awaiting submission to the acquirer or has been submitted to the acquirer but the gateway has not yet received a response about the success or otherwise of the payment.
SYSTEM_ERROR
Internal system error occurred processing the transaction
TIMED_OUT
The gateway has timed out the request to the acquirer because it did not receive a response. Points redemption should not be offered to the payer.
UNKNOWN
The transaction has been submitted to the acquirer but the gateway was not able to find out about the success or otherwise of the payment. If the gateway subsequently finds out about the success of the payment it will update the response code.
UNSPECIFIED_FAILURE
Transaction could not be processed
Enumeration
CONDITIONAL
Provides a recommendation for your next action based on the outcome of this transaction.
The recommendation may advise you that you:
- can proceed as planned.
- must not proceed. For example, because there is suspected fraud.
- can take action to obtain a successful Authorization. For example, by authenticating the payer, or asking the payer for updated or new payment details.
- must make a review decision.
Value must be a member of the following list. The values are case sensitive.
CHECK_TRANSACTION_STATUS_LATER
Check the status of the transaction later. This will be presented if the gateway is in the process of retrieving the response from the acquirer.
CONTACT_PAYMENT_PROVIDER
The status of transaction processing is unknown. Do not submit the same request again and do not attempt to process other transactions under the same agreement. Please contact your payment services provider to find out how to proceed with this payment.
DO_NOT_PROCEED
Do not proceed using this card. This will be presented if the gateway fails the request, but there is no apparent way for this transaction to succeed.
DO_NOT_PROCEED_ABANDON_ORDER
Do not submit the same request again. The payment service provider, scheme or issuer require you to abandon the order.
DO_NOT_PROCEED_CONTACT_PAYER
Do not submit the same request again and do not attempt to process other transactions under the same agreement. The issuer has indicated that the payer has cancelled the payment agreement. Contact the payer.
NO_ACTION
No action is required because the transaction was either successful or is in progress.
PROCEED
Proceed with the next step in processing this payment. If the Initiate Authentication response indicated that payer authentication is available, proceed with authenticating the payer using the Authenticate Payer operation. If the Authenticate Payer operation indicates that the payer is sufficiently authenticated, proceed with submitting an Authorize or Pay request. If the Authorization for the payment was successful proceed with capturing the funds and if applicable, ship the goods.
RESUBMIT_LATER
Resubmit the same request later. The acquirer or issuer has indicated that retrying the same transaction is allowed and may be successful. Some acquirers and networks provide additional information on when to retry. Please check the field 'authorizationResponse.merchantAdviceCode' for more details.
RESUBMIT_WITH_3DS
Attempt payer authentication and resubmit the request with the payer authentication details. Do not resubmit the same request.
RESUBMIT_WITH_ALTERNATIVE_PAYMENT_DETAILS
Ask the payer for alternative payment details (e.g. a new card or another payment method) and resubmit the request with the new details. Do not resubmit the same request.
RESUBMIT_WITH_PAYER_AUTHENTICATION
Attempt payer authentication and resubmit the request with the payer authentication details. Do not resubmit the same request.
RESUBMIT_WITH_PIN
Ask the payer for a valid PIN. There is no need for the payer to tap on the terminal again. Please submit a new transaction request, providing the valid PIN and the original transaction Id in the "transaction.targetTransactionID" field.
RESUBMIT_WITH_UPDATED_PAYMENT_DETAILS
Ask the payer for the updated payment details and resubmit the request with the updated details. The acquirer, scheme or issuer has indicated that the provided payment details have changed, for example, the expiry date of the card has changed. For a merchant-initiated transaction you may want to request account update information using the functionality provided by the gateway. Do not resubmit the same request.
REVIEW_AUTHENTICATION_RESULT
The issuer has downgraded the payer authentication status for the transaction. You need to decide if you want to proceed with an unauthenticated transaction.
REVIEW_RISK_STATUS
You must review the transaction and risk assessment details and make a decision about how to proceed with the transaction.
Enumeration
CONDITIONAL
An action that the gateway performed for you as part of processing this operation.
For example, the gateway automatically submitted an update authorization request to the acquirer when the requested capture amount exceeded the outstanding authorized amount.
Value must be a member of the following list. The values are case sensitive.
UPDATE_AUTHORIZATION
Authorization Update
Enumeration
ALWAYS PROVIDED
A system-generated high level overall result of the operation.
Value must be a member of the following list. The values are case sensitive.
FAILURE
The operation was declined or rejected by the gateway, acquirer or issuer
PENDING
The operation is currently in progress or pending processing
SUCCESS
The operation was successfully processed
UNKNOWN
The result of the operation is unknown
Information relevant to risk assessment.
String
CONDITIONAL
Additional data passed to the risk service provider.
This field is only relevant if you use a risk service provider, and you have agreed with them the values to provide (maximum 100 characters in a field name from the set A-Z, a-z, 0-9, maximum 4kB in length of values across all custom risk fields). An example might be:
Field: risk.custom.headOfficeLocation
Value: London UK
Data can consist of any characters
Enumeration
CONDITIONAL
The overall result of risk assessment returned by the Payment Gateway for each authorization or pay transaction.
Value must be a member of the following list. The values are case sensitive.
ACCEPTED
Order accepted
NOT_CHECKED
Merchant risk rules were not checked and system rules did not reject the Order
REJECTED
Order rejected
REVIEW_REQUIRED
Order marked for review
String
CONDITIONAL
The name of the risk service provider that risk assessed the order.
Data can consist of any characters
Enumeration
CONDITIONAL
The result of order reversal, if this order was rejected after risk review.
The gateway automatically reverses orders that are sent to the acquirer for processing but are rejected after review.
Value must be a member of the following list. The values are case sensitive.
FAIL
The gateway failed to reverse the order.
NOT_APPLICABLE
The gateway did not attempt to reverse the order because reversal is not possible. For example, the acquirer does not support order reversals.
OKAY
The gateway successfully reversed the order.
Details of the decision you made, or need to make, when the risk provider has asked to you review this order.
Enumeration
CONDITIONAL
The decision you made after reviewing the risk provider's assessment of this order.
Value must be a member of the following list. The values are case sensitive.
ACCEPTED
The order has been released for processing
NOT_REQUIRED
No review required
PENDING
A decision to release/cancel the order is pending
REJECTED
The order has been cancelled and a reversal transaction was attempted
String
CONDITIONAL
The reason you selected when you reviewed this order in the external risk provider's system and decided to accept or reject the order.
This field is set to "MANUAL_OVERRIDE" if you chose to override the risk provider's decision to reject the order.
Data can consist of any characters
String
CONDITIONAL
A note that your entered in the external risk provider's system when you reviewed this order and decided to accept or reject the order.
Data can consist of any characters
DateTime
CONDITIONAL
The date and time you made the decision to accept or reject the order.
An instant in time expressed in ISO8601 date + time format - "YYYY-MM-DDThh:mm:ss.SSSZ"
String
CONDITIONAL
The person who reviewed this order and made the decision to accept or reject the order.
Data can consist of any characters
Details of the rules used by the risk provider to assess the risk of this order being fraudulent.
String
CONDITIONAL
The data the risk rule uses for risk assessment.
For example, if a rule blocks BIN ranges, then BIN number is the data for the rule.
Data can consist of any characters
String
CONDITIONAL
The unique identifier for this risk rule provided by the external risk provider.
Data can consist of any characters
String
CONDITIONAL
The name of the risk rule.
Data can consist of any characters
Enumeration
CONDITIONAL
The recommendation made by the risk provider after applying this rule.
The result for the specific risk rule when performed against this order
Value must be a member of the following list. The values are case sensitive.
ACCEPT
Based on this rule, the risk provider recommends proceeding with this order.
NO_ACTION
Based on this rule, the risk provider does not provide a recommendation to accept or reject this order.
OVERRIDE
Based on this rule, the recommendation made based on a different rule was overridden.
REJECT
Based on this rule, the risk provider recommends that this order is rejected.
REVIEW
Based on this rule, the risk provider recommends that you review this order.
Integer
CONDITIONAL
The external risk provider's risk assessment score for this order based on this risk rule.
A number comprising the digits 0-9, having at least one digit. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#nonNegativeInteger.)
Enumeration
CONDITIONAL
The source of this risk rule.
Value must be a member of the following list. The values are case sensitive.
ERROR
The gateway was unable to connect to the external risk provider.
EXTERNAL_RULE
The risk rule has been defined in the external risk provider's system.
MERCHANT_RULE
The risk rule has been defined in the gateway by the Merchant.
MSO_RULE
The risk rule has been defined in the gateway by the MSO.
Integer
CONDITIONAL
The total of the risk scores for all risk rules applied by the external risk provider when assessing the risk of this order being fraudulent.
The higher the score, the higher the fraud risk.
A number comprising the digits 0-9, having at least one digit. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#nonNegativeInteger.)
Shipping information for this order.
The address to which the goods contained in this order are being shipped.
This data may be used to qualify for better interchange rates on corporate purchase card transactions.
String
CONDITIONAL
The city portion of the address.
Data can consist of any characters
String
CONDITIONAL
The name of the company associated with this address.
Data can consist of any characters
Upper case alphabetic text
CONDITIONAL
The 3 letter ISO standard alpha country code of the address.
Data must consist of the characters A-Z
Alphanumeric + additional characters
CONDITIONAL
The post code or zip code of the address.
Data may consist of the characters 0-9, a-z, A-Z, ' ', '-'
Enumeration
CONDITIONAL
How you obtained the shipping address.
Value must be a member of the following list. The values are case sensitive.
ADDRESS_ON_FILE
Order shipped to an address that you have on file.
NEW_ADDRESS
Order shipped to an address provided by the payer for this transaction.
String
CONDITIONAL
The state or province of the address.
Data can consist of any characters
String
CONDITIONAL
The three character ISO 3166-2 country subdivision code for the state or province of the address.
Providing this field might improve your payer experience for 3-D Secure payer authentication.
Data can consist of any characters
String
CONDITIONAL
The first line of the address.
For example, this may be the street name and number, or the Post Office Box details.
Data can consist of any characters
String
CONDITIONAL
The second line of the address (if provided).
Data can consist of any characters
Enumeration
CONDITIONAL
Indicates whether the shipping address provided is the same as the payer's billing address.
Provide this value if you are not providing the full shipping and billing addresses, but you can affirm that they are the same or different.
The default value for this field is:
SAME - if the shipping and billing address are supplied, and all fields are the same (ignoring non-alphanumerics).
DIFFERENT - if the shipping and billing address are supplied, and at least one field is different (ignoring non-alphanumerics).
UNKNOWN - either shipping address or billing address is absent.
Value must be a member of the following list. The values are case sensitive.
DIFFERENT
The shipping and billing addresses are different.
SAME
The shipping and billing addresses are the same.
UNKNOWN
It is not known if the shipping and billing addresses are the same.
Details of the contact person at the address the goods will be shipped to.
Email
CONDITIONAL
The contact person's email address.
The field format restriction ensures that the email address is longer than 3 characters and adheres to a generous subset of valid RFC 2822 email addresses.
Ensures that the email address is longer than 3 characters and adheres to a generous subset of valid RFC 2822 email addresses
String
CONDITIONAL
The first name of the person to whom the order is being shipped.
Data can consist of any characters
String
CONDITIONAL
The last name or surname of the person to whom the order is being shipped.
Data can consist of any characters
Telephone Number
CONDITIONAL
The contact person's mobile phone or cell phone number in ITU-T E123 format, for example +1 607 1234 5678
The number consists of:
- '+'
- country code (1, 2 or 3 digits)
- 'space'
- national number ( which may embed single spaces characters for readability).
Data consists of '+', country code (1, 2 or 3 digits), 'space', and national number (which may embed single space characters for readability)
Telephone Number
CONDITIONAL
The contact person's phone number in ITU-T E123 format, for example +1 607 1234 456
The number consists of:
- '+'
- country code (1, 2 or 3 digits)
- 'space'
- national number ( which may embed single spaces characters for readability).
Data consists of '+', country code (1, 2 or 3 digits), 'space', and national number (which may embed single space characters for readability)
Enumeration
CONDITIONAL
Indicates whether the supplied name for the recipient of shipping matches the cardholder name.
Provide this value if you are not providing the full name or cardholder name, but you can affirm that they are the same or different.
Default value is UNKNOWN
Value must be a member of the following list. The values are case sensitive.
DIFFERENT
The shipping and billing addresses are different.
SAME
The shipping and billing addresses are the same.
UNKNOWN
It is not known if the shipping and billing addresses are the same.
Enumeration
CONDITIONAL
The shipping method used for delivery of this order
Value must be a member of the following list. The values are case sensitive.
ELECTRONIC
Electronic delivery.
GROUND
Ground (4 or more days).
NOT_SHIPPED
Order for goods that are not shipped (for example, travel and event tickets)
OVERNIGHT
Overnight (next day).
PICKUP
Shipped to a local store for pick up.
PRIORITY
Priority (2-3 days).
SAME_DAY
Same day.
Alphanumeric + additional characters
CONDITIONAL
The post code or zip code of the address the order is shipped from.
Data may consist of the characters 0-9, a-z, A-Z, ' ', '-'
Information about the payment type selected by the payer for this payment and the source of the funds.
Depending on the payment type the source of the funds can be a debit or credit card, bank account, or account with a browser payment provider (such as PayPal).
For card payments the source of funds information may be represented by combining one or more of the following: explicitly provided card details, a session identifier which the gateway will use to look up the card details and/or a card token. Precedence rules will be applied in that explicitly provided card details will override session card details which will override card token details. Each of these may represent partial card details, however the combination must result in a full and complete set of card details. See Using Multiple Sources of Card Details for examples.
Information about the source of funds when it is directly provided (as opposed to via a token or session).
For browser payments, the source of funds details are usually collected from the payer on the payment provider's website and provided to you when you retrieve the transaction details (for a successful transaction). However, for some payment types (such as giropay), you must collect the information from the payer and supply it here.
For ACH payments, the details about the payers bank account used for the payment as well as the type of ACH payment are provided in this parameter group.
Enumeration
CONDITIONAL
An indicator identifying the type of bank account.
- Consumer (checking or savings), or
- Business
For pre-arranged payments (sourceOfFunds.provided.ach.secCode=PPD) retrieve this information from the payer.
If payments were telephone-initiated (sourceOfFunds.provided.ach.secCode=TEL) or internet-initiated (sourceOfFunds.provided.ach.secCode=WEB) you may choose to limit the payer's options (e.g. only support consumer checking accounts), depending on your type of business (e.g. B2C online webshop).
Value must be a member of the following list. The values are case sensitive.
CONSUMER_CHECKING
Consumer Checking Account
CONSUMER_SAVINGS
Consumer Savings Account
CORPORATE_CHECKING
Business Checking Account
String
CONDITIONAL
The name of the bank account holder, as it appears on the account at the receiving financial institution.
Retrieve this information from the payer.
Data can consist of any characters
Alphanumeric + additional characters
CONDITIONAL
The identifier of the bank account at the receiving financial institution.
By default, the bank account number will be returned in a masked format, for example, xxxxxx0000. If you wish to return unmasked bank account numbers, you must have the requisite permission, set responseControls.sensitiveData, and authenticate your call to the API using certificate authentication. Contact your payment service provider for further information.
Data may consist of the characters 0-9, a-z, A-Z, ' ', '-', '/'
Digits
CONDITIONAL
The identifier of the receiving financial institution.
Also known as:
- Routing number,
- Transit number, or
- ABA number
Retrieve this information from the payer.
See also http://en.wikipedia.org/wiki/Routing_transit_number.
Data is a string that consists of the characters 0-9.
Enumeration
CONDITIONAL
Identifies the Standard Entry Class (SEC) code to be sent to the issuer.
The SEC is defined by NACHA and describes the origin and intent of the payment. For details please refer to https://www.nacha.org/.
Value must be a member of the following list. The values are case sensitive.
PPD
An ACH debit or credit payment (B2C) that has been authorized by an authenticated customer in written form (signed or similarly authenticated). PPD is used for pre-arranged payments (e.g. employee payroll, mortgage payments, expense reimbursement).
TEL
An ACH debit payment (B2C) that has been authorized by an authenticated customer via phone. TEL may only be used if a relationship already exists between you and the consumer, or, the consumer initiates the contact with you.
WEB
An ACH debit payment (B2C) that has been authorized by an authenticated customer via the internet or a wireless network.
Additional details related to a Bancontact payment.
String
ALWAYS PROVIDED
The name of the bank account holder for the payer's bank account.
Data can consist of any characters
Additional details related to a BLIK browser payment.
String
ALWAYS PROVIDED
The name of the bank account holder for the payer's bank account.
Data can consist of any characters
Additional details related to a Boleto Bancario browser payment.
When processing a Boleto Bancario payment you must also provide the payer's national identifier (customer.nationalId), your reference to the payer (customer.id) and the payer's date of birth (customer.dateOfBirth)
Enumeration
CONDITIONAL
The action to take if the payment is not honored.
Value must be a member of the following list. The values are case sensitive.
WRITE_OFF
Write off the Boleto.
String
ALWAYS PROVIDED
The name of the bank account holder for the payer's bank account.
Data can consist of any characters
Enumeration
CONDITIONAL
Type of the Customer i.e. Individual or Company.
If the value is not provided it will be defaulted to INDIVIDUAL.
Value must be a member of the following list. The values are case sensitive.
COMPANY
Customer is an organization.
INDIVIDUAL
Customer is an individual.
Digits
CONDITIONAL
Number of days granted by you to the customer after the due date of Boleto payment before the specified action is taken.
Data is a string that consists of the characters 0-9.
Date
CONDITIONAL
The date by which the Boleto amount needs to be paid.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
Url
CONDITIONAL
The URL issued by the gateway which you must use to retrieve collection bank slip.
Ensure that this is a valid URL according to RFC 1738.
Details about the card.
Use this parameter group when you have sourced payment details using:
Cards: the card details entered directly or collected using a Point of Sale (POS) terminal.
Device payment methods such as Apple Pay, Android Pay, Samsung Pay or Google Pay.
Digital wallets such as Masterpass, Visa Checkout or Amex Express Checkout.
Card scheme tokens where the card was tokenized using a card scheme tokenization service such as Mastercard Digital Enablement Service (MDES).
Alternative IDs provided by the schemes, such as Alt-Id for Guest Checkout payments in India using American Express, Rupay cards issued in India.
Enumeration
CONDITIONAL
You can provide this field for card types that have a savings/checking option, such as Maestro cards.
If you do not provide a value, we will use the acquirer's default. You can use paymentTypes.card.cardTypes in the 'Retrieve Payment Options' operation response to determine the card type.
Value must be a member of the following list. The values are case sensitive.
CHECKING
SAVINGS
Enumeration
ALWAYS PROVIDED
The brand name used to describe the card that is recognized and accepted globally.
For many major card types this will match the scheme name. In some markets, a card may also be co-branded with a local brand that is recognized and accepted within its country/region of origin (see card.localBrand).
You may use this information to support surcharging decisions. This information is gathered from 3rd party sources and may not be accurate in all circumstances.
Value must be a member of the following list. The values are case sensitive.
AMEX
American Express
CHINA_UNIONPAY
China UnionPay
DINERS_CLUB
Diners Club
DISCOVER
Discover
JCB
JCB (Japan Credit Bureau)
LOCAL_BRAND_ONLY
The card does not have a global brand.
MAESTRO
Maestro
MASTERCARD
MasterCard
RUPAY
RuPay
UATP
UATP (Universal Air Travel Plan)
UNKNOWN
The brand of the card used in the transaction could not be identified
VISA
Visa
String
CONDITIONAL
This field is only applicable if the gateway has identified the card as the co-branded card.
For a co-branded card, the PAYMENT_OPTIONS_INQUIRY response contains both brands in field paymentTypes.card.cardTypes[n] (when the request contains field sourceOfFunds.provided.card.prefix).
- • You will receive paymentTypes.card.interactionConstraints=CARD_TYPE_SELECTION in the PAYMENT_OPTIONS_INQUIRY response if the card type selection is mandatory. In this case, you must let the payer select the card type and provide this field in the request.
- • You will receive paymentTypes.card.capabilities[n].capability=CARD_TYPE_SELECTION in the PAYMENT_OPTIONS_INQUIRY response if the card type selection is optional. In this case, you may let the payer select the card type or make the selection yourself and provide this field in the request. If not provided, the gateway will make the selection based on your configuration and the card type.
- • If the PAYMENT_OPTIONS_INQUIRY response contains neither of the above fields, the gateway determines the card type and requests that contain this field will be rejected by the gateway.
Data can consist of any characters
Use this parameter group if the payer used a device payment technology (eg ApplePay).
You can either just present the device's payment token in the paymentToken subfield, or decrypt the payment token yourself and pass the components in the 3dSecure subfields.
Enumeration
CONDITIONAL
The format of the cryptogram provided for the device payment.
You must provide the cryptogram format when you decrypt the payment token and provide the payment details (including the online payment cryptogram) in the transaction request.
You do not need to provide the cryptogram format if you provide the payment token in sourceOfFunds.provided.card.devicePayment.paymentToken
Value must be a member of the following list. The values are case sensitive.
3DSECURE
The payment data keys for the online payment cryptogram are provided using the 3-D Secure format.
EMV
The payment data keys for the online payment cryptogram are provided using the EMV format.
The expiry date of the account number associated with a digital payment method.
The associated account number is returned in sourceOfFunds.provided.card.deviceSpecificNumber. This field is returned for:
- • Device payments: the expiry date for the Device Primary Account Number (DPAN).
- • Digital wallets: the expiry date for the Token PAN.
- • Card scheme tokens: the expiry date for the Token PAN.
Digits
ALWAYS PROVIDED
Month from the expiry date of the device specific account number.
Months are numbered January=1, through to December=12.
Data is a number between 1 and 12 represented as a string.
Digits
ALWAYS PROVIDED
Year from the expiry date of the device specific account number.
The Common Era year is 2000 plus this value.
Data is a string that consists of the characters 0-9.
Masked digits
ALWAYS PROVIDED
The payer's account number associated with a digital payment method.
Use this field for:
- • Device payments: the payers's account number associated with the mobile device used for the payment. This is also known as the Device Primary Account Number (DPAN).
- • Digital wallets: the Token PAN returned by a digital wallet. The gateway only returns this value for Amex Express Checkout.
- • Card scheme tokens: the token generated by a card scheme tokenization service such as Mastercard Digital Enablement Service (MDES). The token is used as an identifier of the payer's Primary Account Number (PAN) securely stored by the service. For MDES, this token is referred to as the Token PAN. For VTS, this is the Token
Data is a string that consists of the characters 0-9, plus 'x' for masking
String
CONDITIONAL
This field only applies to transactions that originate from an EMV capable terminal.
It contains the EMV fields returned from the issuer in response to an authorization request for the chip transaction when the transaction was sent online.
The card/terminal uses data returned from the issuer to make the final decision to accept or decline the transaction.
Data can consist of any characters
Enumeration
CONDITIONAL
The encryption framework used for the payment details received by the gateway.
Value must be a member of the following list. The values are case sensitive.
DEVICE
Encrypted by a payer's device (such as a mobile phone).
DIGITAL_WALLET
Encrypted by a payer's digital wallet.
DUKPT
Encrypted by a payment terminal using Derived Unique Key Per Transaction (DUKPT).
Expiry date, as shown on the card.
This field corresponds to EMV tag 5F24
Digits
ALWAYS PROVIDED
Month, as shown on the card.
Months are numbered January=1, through to December=12.
Data is a number between 1 and 12 represented as a string.
Digits
ALWAYS PROVIDED
Year, as shown on the card.
The Common Era year is 2000 plus this value.
Data is a string that consists of the characters 0-9.
Enumeration
ALWAYS PROVIDED
The method used by the payer to provide the funds for the payment.
You may use this information to support surcharging decisions. This information is gathered from 3rd party sources and may not be accurate in all circumstances.
Value must be a member of the following list. The values are case sensitive.
CHARGE
The payer has a line of credit with the issuer which must be paid off monthly.
CREDIT
The payer has a revolving line of credit with the issuer.
DEBIT
Funds are immediately debited from the payer's account with the issuer.
UNKNOWN
The account funding method could not be determined.
String
CONDITIONAL
The issuer of the card, if known.
WARNING: This information may be incorrect or incomplete – use at your own risk.
Data can consist of any characters
String
CONDITIONAL
The brand name used to describe a card that is recognized and accepted within its country/region of origin.
The card may also be co-branded with a brand name that is recognized and accepted globally (see card.brand).
You may use this information to support surcharging decisions. This information is gathered from 3rd party sources and may not be accurate in all circumstances.
Data can consist of any characters
String
CONDITIONAL
The cardholder's name as printed on the card.
Data can consist of any characters
Masked digits
ALWAYS PROVIDED
The account number of the payer's account used for the payment.
On requests, provide the number in the form that you receive it (as explained below). On responses, the gateway populates it with a form that the payer would recognize (also explained in more detail below).
- Request
On request, populate this field based on the payment method you are using for the payment:- • Card: the account number embossed onto the card. This field corresponds to EMV tag 5A.
- • Device payment methods such as Apple Pay, Android Pay, Samsung Pay, or Google Pay. Normally for device payments, you would populate sourceOfFunds.provided.card.devicePayment.paymentToken and the gateway will decrypt and extract this field. However, you can populate this field if you decrypt the payment token yourself. In this case use the Device PAN (DPAN) provided in the payment token.
- • Digital wallets such as Masterpass, Visa Checkout or Amex Express Checkout. In this case, provide the PAN retrieved from the wallet.
- • Scheme tokens such as MDES (Mastercard Digital Enablement Service) or Visa Token Service (VTS). For MDES tokens, supply the value called the "Token PAN". For VTS tokens, supply the value called "Token"
- • Alternative IDs provided by the schemes. For Guest Checkout payments in India using American Express, Rupay cards, provide the "Alt-Id".
- Response
On return, the card number will be populated in 6.4 masking format, for example, 000000xxxxxx0000. If you wish to return unmasked card numbers, you must have the requisite permission, set responseControls.sensitiveData field to UNMASK, and authenticate your call to the API using certificate authentication.
When a DPAN or scheme token was provided in the transaction request, then this field will represent the PAN of the associated payer's account (when supported by the acquirer). This is also referred to as the Funding PAN (FPAN).
Data is a string that consists of the characters 0-9, plus 'x' for masking
String
CONDITIONAL
The unique identifier that links a Primary Account Number (PAN) for a card with all Device Primary Account Numbers (DPANs) or card scheme tokens issued for the card.
Data can consist of any characters
Enumeration
ALWAYS PROVIDED
The organization that owns a card brand and defines operating regulations for its use.
The card scheme also controls authorization and settlement of card transactions among issuers and acquirers.
Value must be a member of the following list. The values are case sensitive.
AMEX
American Express
CHINA_UNIONPAY
China UnionPay
DINERS_CLUB
Diners Club
DISCOVER
Discover
JCB
JCB (Japan Credit Bureau)
MASTERCARD
MasterCard
OTHER
The scheme of the card used in the transaction could not be identified.
RUPAY
RuPay
UATP
UATP (Universal Air Travel Plan)
VISA
Visa
Digits
CONDITIONAL
A number used to differentiate between cards with the same Primary Account Number (PAN).
This field corresponds to EMV tag 5F34
Data is a string that consists of the characters 0-9.
Enumeration
CONDITIONAL
This field only applies if you collect card details from your payer, store them, and either you or your payer use the stored credentials for subsequent payments.
Refer to Credential on File, Cardholder and Merchant-initiated Transactions for details.
Value must be a member of the following list. The values are case sensitive.
NOT_STORED
Set this value if you are not storing the card details provided by the payer for this transaction. The gateway sets this value by default, if you are submitting a payer-initiated transaction. You must not use this value when submitting merchant-initiated transactions.
STORED
Set this value if you have previously stored the card details provided by the payer and are now using these stored details. The gateway sets this value by default, if you are submitting a merchant-initiated transaction.
TO_BE_STORED
Set this value if this is the first transaction using these card details and you intend to store the card details if the transaction is successful.
String
CONDITIONAL
Tags provide you with additional information about the card.
For example, identifying if it is an EBT (Electronic Benefits Transfer) or Health Benefit Card. You can use this information to support your decisions about accepting payments with this card. The data is encoded in JSON as an object map indexed on the tag name. Some standard tag names are EBT and HEALTH_BENEFIT_CARD_IIAS. If these tags apply to the card, the tag will have value true, otherwise it will be absent. Other tag names with other values might also exist, depending on which acquirer processed the transaction. For example, an EBT card might return value: {"ACME_CARD_IDENTIFIER":"23", "EBT":true} Contact your payment provider if you wish to understand all tags available for your acquirers.
Data can consist of any characters
Boolean
CONDITIONAL
Indicates whether card track data is provided.
The values 'true' or 'false'. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#boolean.)
For Direct Debit payments in Canada you must provide the payer's bank account details in this parameter group.
Enumeration
CONDITIONAL
An indicator identifying the type of bank account.
Value must be a member of the following list. The values are case sensitive.
CONSUMER_CHECKING
Consumer Checking Account
CONSUMER_SAVINGS
Consumer Savings Account
String
ALWAYS PROVIDED
The name of the bank account holder, as it appears on the account at the receiving financial institution.
Data can consist of any characters
Alphanumeric + additional characters
ALWAYS PROVIDED
The identifier of the bank account at the receiving financial institution.
The bank account number will be returned in a masked format, for example, xxxxxxxxxxxxx123.
Data may consist of the characters 0-9, a-z, A-Z, ' ', '-', '/'
Digits
ALWAYS PROVIDED
The identifier of the receiving financial institution.
Data is a string that consists of the characters 0-9.
Digits
ALWAYS PROVIDED
The transit number identifying the branch of the receiving financial institution where the bank account is held.
Data is a string that consists of the characters 0-9.
Additional details related to a eps-Überweisung browser payment.
Alpha
ALWAYS PROVIDED
The country where the payer has their bank account.
Provide the ISO 3166 alpha-3 country code for this country.
Data may consist of the characters a-z, A-Z
String
CONDITIONAL
The name of the bank account holder for the payer's bank account.
Data can consist of any characters
The additional details required to initiate a giropay browser payment.
Digits
CONDITIONAL
German bank identifier (Bankleitzahl) for the payer's bank account.
Data is a string that consists of the characters 0-9.
Alphanumeric
CONDITIONAL
The international Business Identifier Code (BIC) for the payer's bank account.
Data may consist of the characters 0-9, a-z, A-Z
String
CONDITIONAL
The International Bank Account Number (IBAN) for the payer's bank account.
By default, the bank account number will be returned in a masked format, for example, xxxxxx0000. If you wish to return unmasked bank account numbers, you must have the requisite permission, set responseControls.sensitiveData, and authenticate your call to the API using certificate authentication. Contact your payment service provider for further information.
Data can consist of any characters
Information about the payer's iDEAL account provided to you when the payer successfully makes a payment.
String
CONDITIONAL
The name of the bank account holder for the payer's bank account.
Data can consist of any characters
Alphanumeric
CONDITIONAL
The international Business Identifier Code (BIC) for the payer's bank account.
Data may consist of the characters 0-9, a-z, A-Z
String
CONDITIONAL
The International Bank Account Number (IBAN) for the payer's bank account.
By default, the bank account number will be returned in a masked format, for example, xxxxxx0000. If you wish to return unmasked bank account numbers, you must have the requisite permission, set responseControls.sensitiveData, and authenticate your call to the API using certificate authentication. Contact your payment service provider for further information.
Data can consist of any characters
Additional details related to a Klarna Pay Later payment.
Upper case alphabetic text
ALWAYS PROVIDED
The country where the payer has their bank account.
Provide the ISO 3166 alpha-3 country code for this country.
Data must consist of the characters A-Z
Additional details related to a Klarna Pay Now payment.
Alpha
ALWAYS PROVIDED
The country where the payer has their bank account.
Provide the ISO 3166 alpha-3 country code for this country.
Data may consist of the characters a-z, A-Z
Additional details related to Open Banking Bank Transfer.
String
ALWAYS PROVIDED
Identifier of the payer's bank, also known as ASPSP (Account Servicing Payment Services Provider)
Data can consist of any characters
Additional details related to a PayU browser payment.
Alpha
ALWAYS PROVIDED
The country where the payer has their bank account.
Provide the ISO 3166 alpha-3 country code for this country.
Data may consist of the characters a-z, A-Z
String
CONDITIONAL
The name of the bank account holder for the payer's bank account.
Data can consist of any characters
Additional details related to a Payconiq payment.
Alpha
ALWAYS PROVIDED
This is the country of the payer's payconiq account.
Provide the ISO 3166 alpha-3 country code for this country.
Data may consist of the characters a-z, A-Z
Information about the payer's PayPal account.
It is provided to you when the payer successfully makes a payment using PayPal or when you have established a billing agreement with the payer.
Email
CONDITIONAL
The email address of the payer's PayPal account.
Ensures that the email address is longer than 3 characters and adheres to a generous subset of valid RFC 2822 email addresses
String
CONDITIONAL
The name of the account holder of the payer's PayPal account.
Data can consist of any characters
Details about the agreement you have established with the payer that allows you to bill the payer's PayPal account for goods or services.
Enumeration
CONDITIONAL
Indicates the number of billing agreements between you and this payer.
Value must be a member of the following list. The values are case sensitive.
MULTIPLE
Indicates that you have multiple billing agreements with this payer. This means that a new agreement ID will be returned in response to each request.
SINGLE
Indicates that you have a single billing agreement with this payer. This means that the same agreement ID will be returned in response to each request.
String
CONDITIONAL
Your description for the PayPal billing agreement.
This description is displayed to the payer when they are asked to approve the billing agreement.
Data can consist of any characters
String
CONDITIONAL
An identifier provided by PayPal for the billing agreement.
Data can consist of any characters
String
CONDITIONAL
Your name for the PayPal billing agreement.
Data can consist of any characters
String
CONDITIONAL
The unique identifier for the payer assigned by PayPal.
Data can consist of any characters
Additional details related to a paysafecard browser payment.
Email
ALWAYS PROVIDED
The mypaysafecard account email identifying the mypaysafecard account that will be refunded.
Ensures that the email address is longer than 3 characters and adheres to a generous subset of valid RFC 2822 email addresses
Alpha
ALWAYS PROVIDED
The country where the payer has their bank account.
Provide the ISO 3166 alpha-3 country code for this country.
Data may consist of the characters a-z, A-Z
Additional details related to a Przelewy24 browser payment.
String
ALWAYS PROVIDED
The name of the bank account holder for the payer's bank account.
Data can consist of any characters
Details about the payer's bank account used for a payment made using SEPA
String
ALWAYS PROVIDED
The name of the bank account holder for the payer's bank account.
Data can consist of any characters
Alphanumeric
CONDITIONAL
The international Business Identifier Code (BIC) for the payer's bank account.
Data may consist of the characters 0-9, a-z, A-Z
String
ALWAYS PROVIDED
The International Bank Account Number (IBAN) for the payer's bank account.
By default, the bank account number will be returned in a masked format, for example, xxxxxx0000. If you wish to return unmasked bank account numbers, you must have the requisite permission, set responseControls.sensitiveData, and authenticate your call to the API using certificate authentication. Contact your payment service provider for further information.
Data can consist of any characters
Additional details related to a Sofort (Klarna) payment.
Upper case alphabetic text
CONDITIONAL
The country where the payer has their bank account.
Provide the ISO 3166 alpha-3 country code for this country.
Data must consist of the characters A-Z
String
CONDITIONAL
The name of the bank account holder for the payer's bank account.
Data can consist of any characters
String
CONDITIONAL
The country-specific bank account number for the payer's bank account.
By default, the bank account number will be returned in a masked format, for example, xxxxxx0000. If you wish to return unmasked bank account numbers, you must have the requisite permission, set responseControls.sensitiveData, and authenticate your call to the API using certificate authentication. Contact your payment service provider for further information.
Data can consist of any characters
String
CONDITIONAL
The country-specific bank identifier for the payer's bank account.
Data can consist of any characters
String
CONDITIONAL
The international Business Identifier Code (BIC) for the payer's bank account.
Data can consist of any characters
String
CONDITIONAL
The International Bank Account Number (IBAN) for the payer's bank account.
By default, the bank account number will be returned in a masked format, for example, xxxxxx0000. If you wish to return unmasked bank account numbers, you must have the requisite permission, set responseControls.sensitiveData, and authenticate your call to the API using certificate authentication. Contact your payment service provider for further information.
Data can consist of any characters
Additional details related to a Trustly.
Alpha
ALWAYS PROVIDED
The country where the payer has their bank account.
Provide the ISO 3166 alpha-3 country code for this country.
Data may consist of the characters a-z, A-Z
String
ALWAYS PROVIDED
The name of the bank account holder for the payer's bank account.
Data can consist of any characters
Additional details related to a WeChat Pay browser payment.
String
ALWAYS PROVIDED
The name of the account holder for the payer's WeChat Pay account.
Data can consist of any characters
Alphanumeric
CONDITIONAL
A gateway token that contains account identifier details.
The account identifier details stored against this token will be used to process the request.
If account identifier details are also contained in the request, or the request contains a session with account identifier details, these take precedence over the details stored against the token.
Data may consist of the characters 0-9, a-z, A-Z
Enumeration
CONDITIONAL
The payment method used for this payment.
If you are passing card data (in any form) on the API, then you need to set this value, and also provide the card details in the sourceOfFunds.provided.card group. In the case of digital wallets or device payment methods, you must also populate the order.walletProvider field.
If you are making a payment with a gateway token, then you can leave this field unset, and only populate the sourceOfFunds.token field. However you can set this to CARD if you want to overwrite or augment the token data with a card security code, expiry date, or cardholder name.
Value must be a member of the following list. The values are case sensitive.
ACH
The payer chose to pay using an electronic fund transfer, to be processed via the Automated Clearing House (ACH) Network. You must provide the payer's bank account details and information about the type of ACH payment under the sourceOfFunds.provided.ach parameter group.
ALIPAY
The payer selected the payment method Alipay.
BANCONTACT
The payer selected the payment method Bancontact.
BLIK
The payer selected the payment method BLIK.
BOLETO_BANCARIO
The payer selected the payment method Boleto Bancario.
BROWSER_PAYMENT
The payer selected to pay using a browser payment. Refer to the sourceOfFunds.browserPayment parameter group for additional details.
CARD
Use this value for payments that obtained the card details either directly from the card, or from a POS terminal, or from a wallet, or through a device payment method.
DIRECT_DEBIT_CANADA
The payer chose to pay using Direct Debit in Canada, also known as pre-authorized bank debits (PADs). You must provide the payer's bank account details in the sourceOfFunds.provided.directDebitCanada parameter group.
EPS_UEBERWEISUNG
The payer selected the payment method eps-Überweisung.
GIROPAY
The payer selected the payment method giropay.
IDEAL
The payer selected the payment method iDEAL.
KLARNA_FINANCING
The payer selected the payment method Klarna financing.
KLARNA_PAY_LATER
The payer selected the payment method Klarna Pay Later.
KLARNA_PAY_NOW
The payer selected the payment method Klarna Pay Now.
NONE
The transaction transfers money to or from the merchant, without the involvement of a payer. For example, recording monthly merchant service fees from your payment service provider.
OPEN_BANKING_BANK_TRANSFER
The payer selected the payment method Open Banking Bank Transfer.
PAYCONIQ
The payer selected the payment method payconiq.
PAYPAL
The payer selected the payment method PayPal.
PAYSAFECARD
The payer selected the payment method paysafecard.
PAYU
The payer selected the payment method PayU.
PRZELEWY24
The payer selected the payment method Przelewy24.
SEPA
The payer selected the payment method SEPA.
SOFORT
The payer selected the payment method Sofortbanking.
TRUSTLY
The payer selected the payment method Trustly.
WECHAT_PAY
The payer selected the payment method WeChatPay.
DateTime
CONDITIONAL
Indicates the date and time the gateway considers the transaction to have last been updated.
An instant in time expressed in ISO8601 date + time format - "YYYY-MM-DDThh:mm:ss.SSSZ"
DateTime
CONDITIONAL
Indicates the date and time the gateway considers the transaction to have been created.
The gateway uses timeOfRecord as a point-in-time value for operations such as sorting, billing, and reporting.
An instant in time expressed in ISO8601 date + time format - "YYYY-MM-DDThh:mm:ss.SSSZ"
Information about this transaction.
JSON Text
CONDITIONAL
Provides additional data provided by the acquirer in the transaction response that could be of interest to you.
It might provide additional information that may help you understand unexpected results or provide acquirer-specific response data. For example, it could provide information about the results of validation of data by the issuer or card scheme of data you provided for card present transactions. The data is provided as as series of name-value pairs where the name is the acquirer field and the value is exactly as provided by the acquirer. For example, {"48.74.1":3, "48.74.2:5":48, "48.80":67}
Data is JSON Text
Integer
CONDITIONAL
The processor's identifier for the settlement batch.
Provided only if the transaction was settled by batch.
A number comprising the digits 0-9, having at least one digit. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#nonNegativeInteger.)
String
CONDITIONAL
Additional information requested by the acquirer which cannot be passed using other available data fields.
This field must not contain sensitive data.
Data can consist of any characters
String
CONDITIONAL
The date the transaction was processed, as returned by the acquirer.
Not returned by most acquirers.
Data can consist of any characters
String
CONDITIONAL
The ID for the acquirer used to process the transaction.
Data can consist of any characters
String
CONDITIONAL
An identifier allocated by an acquirer to the merchant.
This may also be referred to as the Card Acceptor Identification Code (CAIC), Card Acceptor ID (CAID), or Service Establishment Number (SE Number).
Data can consist of any characters
Date
CONDITIONAL
The date the acquirer expects the funds to be transferred to (in the case of payments) or from (in the case of refunds) the merchant's account.
The date is defined in the acquirer's time zone (see transaction.acquirer.timeZone).
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
String
CONDITIONAL
The time the transaction was processed, as returned by the acquirer.
Not returned by most acquirers.
Data can consist of any characters
Time Offset
CONDITIONAL
The acquirer's time zone associated with the settlement date for the transaction (see transaction.acquirer.settlementDate).
Data must comply with ISO 8601 UTC time offset format, +hhmm or -hhmm.
String
CONDITIONAL
Identifier used by the acquirer to identify the transaction.
This identifier may be used by the acquirer in settlement reports.
Data can consist of any characters
Decimal
ALWAYS PROVIDED
The total amount for the transaction.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Enumeration
CONDITIONAL
Indicates the result of payer authentication.
Value must be a member of the following list. The values are case sensitive.
AUTHENTICATION_ATTEMPTED
Payer authentication was attempted and a proof of authentication attempt was obtained.
AUTHENTICATION_AVAILABLE
Payer authentication is available for the payment method provided.
AUTHENTICATION_EXEMPT
Exemption from the Regulatory Technical Standards (RTS) requirements for Strong Customer Authentication (SCA) under the Payment Services Directive 2 (PSD2) regulations in the European Economic Area has been claimed or granted.
AUTHENTICATION_FAILED
The payer was not authenticated. You should not proceed with this transaction.
AUTHENTICATION_NOT_IN_EFFECT
There is no authentication information associated with this transaction.
AUTHENTICATION_NOT_SUPPORTED
The requested authentication method is not supported for this payment method.
AUTHENTICATION_PENDING
Payer authentication is pending completion of a challenge process.
AUTHENTICATION_REJECTED
The issuer rejected the authentication request and requested that you do not attempt authorization of a payment.
AUTHENTICATION_REQUIRED
Payer authentication is required for this payment, but was not provided.
AUTHENTICATION_SUCCESSFUL
The payer was successfully authenticated.
AUTHENTICATION_UNAVAILABLE
The payer was not able to be authenticated due to a technical or other issue.
ASCII Text
CONDITIONAL
Value generated by the issuing bank in response to a proposal to transfer funds.
Data consists of ASCII characters
Enumeration
CONDITIONAL
Indicates the entity who authorized the transaction.
Typically the transaction is submitted to the issuer and the issuer either authorizes the transaction and issues an authorization code or does not authorize the transaction and no authorization code is returned.
Value must be a member of the following list. The values are case sensitive.
ACQUIRER
The transaction has not been forwarded to the scheme/issuer but the acquirer has made the authorization decision on behalf of the issuer. This may happen if the acquirer was unable to forward the transaction to the scheme or the acquirer rejected the transaction request because of failed validation.
ISSUER
The transaction has been forwarded to the issuer and the issuer has either authorized the transaction or not.
SCHEME
The transaction has not been forwarded to the issuer but the scheme has made the authorization decision on behalf of the issuer. This may happen if the scheme was unable to forward the transaction to the issuer or the scheme chose to do stand-in processing for this transaction.
String
CONDITIONAL
The name of the batch that you used to upload this transaction to the gateway.
Provided only if this transaction was submitted via a batch file.
Data can consist of any characters
Upper case alphabetic text
ALWAYS PROVIDED
The currency of the transaction expressed as an ISO 4217 alpha code, e.g. USD.
Data must consist of the characters A-Z
Boolean
CONDITIONAL
Indicates that you were not able to submit the Authorization (or Payment) transaction at the time it was completed with the cardholder due to a connectivity, system issue, or other limitations and have deferred submitting it until your system was back online.
The values 'true' or 'false'. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#boolean.)
Enumeration
CONDITIONAL
The type of disbursement used for this transaction.
If your Merchant Category Code is 7995 (Gambling Transactions) and you are paying out gaming winnings, set the value to GAMING_WINNINGS. If your Merchant Category Code is 6536 (MoneySend Intracountry) and you are paying a credit card bill, set the value to CREDIT_CARD_BILL_PAYMENT and provide the payment sender details.
Value must be a member of the following list. The values are case sensitive.
CREDIT_CARD_BILL_PAYMENT
Indicates that you are paying a credit card bill.
GAMING_WINNINGS
Indicates that you are paying out gaming winnings to a payer.
Decimal
CONDITIONAL
The total amount deducted from the transaction amount that would normally apply.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Information about the disputed transaction.
Date
CONDITIONAL
The date the payer notified the issuer to cancel a recurring payment that is being disputed.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
Date
CONDITIONAL
The date by which the merchant must take action.
For example, if the acquirer has requested additional information (transaction.dispute.event = INFORMATION_REQUESTED), the merchant must provide a response by this date.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
Enumeration
ALWAYS PROVIDED
The step in the dispute management process that triggered this transaction
Value must be a member of the following list. The values are case sensitive.
ACTION_REQUIRED
An action from the merchant is required.
CHARGEBACK_DEBITED
The chargeback amount will soon be debited to the merchant's account.
CHARGEBACK_REVERSED
The Chargeback amount that was debited has been credited back to the merchant's account.
INFORMATION_ONLY
Information about the state of the dispute.
Date
CONDITIONAL
The date of the event in the dispute management process described by transaction.dispute.event
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
String
CONDITIONAL
Additional information about the dispute event (see transaction.dispute.event).
The terms used here will reflect the terms used by your bank.
Data can consist of any characters
Parameters used by the gateway to match the chargeback transaction to the original transaction being disputed.
When transaction.dispute.matchAction = MATCHED, then the gateway will attempt to match this chargeback transaction to an existing financial transaction with these parameters. If no match is found then the gateway does not record the chargeback transaction.
When transaction.dispute.matchAction = STANDALONE, the gateway will create a new order containing the chargeback transaction and does not attempt to match it to the original transaction.
When transaction.dispute.matchAction = MATCHED_FALLBACK, then the gateway will first attempt to match this chargeback transaction to an existing financial transaction with these parameters. If it cannot be matched, the gateway will create a new order containing the chargeback transaction. When the chargeback transaction can be matched to more than one merchant gateway profile, a new order will be created against each profile. When this occurs it will be noted in order.description.
ASCII Text
CONDITIONAL
The Retrieval Reference Number of the disputed transaction.
Data consists of ASCII characters
String
CONDITIONAL
Identifier used by the acquirer to identify the disputed transaction.
Data can consist of any characters
Date
CONDITIONAL
The date of the disputed transaction.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
Digits
CONDITIONAL
The System Trace Audit Number of the disputed transaction.
Data is a string that consists of the characters 0-9.
Enumeration
ALWAYS PROVIDED
Indicates how the chargeback transaction is recorded.
Value must be a member of the following list. The values are case sensitive.
MATCHED
Create the chargeback transaction only if it can be matched to the original transaction being disputed.
MATCHED_FALLBACK
Attempt to match the chargeback transaction to the original transaction being disputed. If it cannot be matched, then create a new order containing the chargeback transaction.
STANDALONE
Do not match the chargeback transaction to the original transaction being disputed; create a new order containing the chargeback transaction.
ASCII Text
CONDITIONAL
A description of why the transaction is disputed.
Data consists of ASCII characters
ASCII Text
CONDITIONAL
A code provided by the acquirer to indicate the reason for the chargeback.
Data consists of ASCII characters
Decimal
CONDITIONAL
The duty amount (also known as customs tax, tariff or dues) for the transaction.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Details of the amount settled to your account for this transaction.
This group is present for transactions that could be funded, including successful CAPTURE, REFUND and PAY transactions as well as FUNDING transactions that provide funding and/or fee details only.
String
CONDITIONAL
The service provider's description for the funding type.
Data can consist of any characters
Decimal
CONDITIONAL
The amount of money in your bank account, as reported to the gateway for this transaction.
This may be a credit (positive value) or debit (negative value).
This value is provided if transaction.funding.status is FUNDED. It might be provided if transaction.funding.status is FUNDING_ASSURED or FUNDING_ON_HOLD.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Upper case alphabetic text
CONDITIONAL
The currency of transaction.funding.amount expressed as an ISO 4217 alpha code, e.g. USD.
This value is provided if transaction.funding.status is FUNDED. It might be provided if transaction.funding.status is FUNDING_ASSURED or FUNDING_ON_HOLD.
Data must consist of the characters A-Z
Date
CONDITIONAL
The date the funds arrive in your bank account.
The date is defined in the acquirer's time zone (see transaction.acquirer.timeZone).
This value is only populated if the date is known with certainty.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
Date
CONDITIONAL
The date the acquirer estimates the funds to arrive in your bank account.
This value is only populated if neither the initiated date nor the actual funding date are available.
The date is defined in the acquirer's time zone (see transaction.acquirer.timeZone).
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
Breakdown of the fees deducted by your acquirer for this transaction.
String
CONDITIONAL
The name of the fee as provided by your acquirer.
Data can consist of any characters
Decimal
CONDITIONAL
The fee amount for the fee type defined in funding.fee[n].type for this transaction.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Date
CONDITIONAL
The date the fees are debited from your bank account.
This value is only populated if the date is known with certainty.
The date is defined in the acquirer's time zone (see transaction.acquirer.timeZone).
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
Date
CONDITIONAL
The date the acquirer estimates that the fees are being debited from your bank account.
This value is only populated if neither the initiated date nor the actual date the funds are debited are available.
The date is defined in the acquirer's time zone (see transaction.acquirer.timeZone).
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
Date
CONDITIONAL
The date the acquirer initiated the fees being debited from your bank account.
This value is only populated if the date of transfer is known with certainty, but the date the funds will settle to your account is uncertain.
The date is defined in the acquirer's time zone (see transaction.acquirer.timeZone).
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
Decimal
CONDITIONAL
The rate (percentage) applied to the transaction amount to determine the fee amount for the fee type defined in funding.fee[n].type.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Enumeration
CONDITIONAL
The fee type for which the amount defined in funding.fee[n].amount has been charged.
Value must be a member of the following list. The values are case sensitive.
CHARGEBACK_FEE
Fees associated with Chargeback transactions.
FUNDING_FEE
Fees associated with transferring money to your account.
MERCHANT_FEE
Fees associated with the merchant account. For example: Merchant monthly fee, Minimum monthly fee.
OTHER_FEE
Any other fees that have not been captured by the above types.
TRANSACTION_FEE
Fees associated with Authorization, Capture and Refund transactions.
Decimal
CONDITIONAL
The total fee amount deducted by your acquirer for the transaction for settling the funds to your account.
This value is only supplied if your acquirer provides the fee data.
A breakdown of the fees is shown in the transaction.funding.fee[n] parameter group if this information was provided by your acquirer.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Upper case alphabetic text
CONDITIONAL
The currency of transaction.funding.feeAmount expressed as an ISO 4217 alpha code, e.g. USD.
Data must consist of the characters A-Z
Date
CONDITIONAL
The date the acquirer initiated the funds transfer into your bank account.
This value is only populated if the date of transfer is known with certainty, but the date the funds will settle to your account is uncertain.
The date is defined in the acquirer's time zone (see transaction.acquirer.timeZone).
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
String
CONDITIONAL
Your bank's Identifier for the group of transactions settled to your account.
Data can consist of any characters
Enumeration
ALWAYS PROVIDED
The current status of funding to / from your account for this transaction.
Value must be a member of the following list. The values are case sensitive.
FUNDED
The transaction is clearing and will move money into your account.
FUNDING_ADJUSTED
Funding for the transaction has been adjusted, meaning either funds have been transferred to / from your account. This can happen for both successful or failed funding.
FUNDING_ASSURED
The transaction is guaranteed to settle, but has not yet done so.
FUNDING_FAILED
The transaction could result in the transfer of money to / from your account, however the service provider has not yet received funds from the payer. In case of a refund the service provider was not able to transfer funds to the payer.
FUNDING_ON_HOLD
The transaction could result in the transfer of money to / from your account, however the financial provider is unable to complete the transfer of funds. This might be a transient state.
IN_PROGRESS
The transaction could result in the transfer of money to / from your account, but has not yet have done so. This is usually a transient state.
NON_FUNDED
The transaction cannot result in transfer of money to / from your account.
NOT_SUPPORTED
The transaction was settled to an institution from which the gateway does not receive funding information.
String
ALWAYS PROVIDED
Unique identifier for this transaction to distinguish it from any other transaction on the order.
An order can have transactions representing:
- Movement of money. For example, payments and refunds.
- Validations. For example, account verification or 3-D Secure authentication of the payer.
- Undoing other transactions. For example, voiding a payment transaction.
- Chargebacks.
- Fees from your payment service provider.
If you attempt an operation and it fails (eg you try to PAY on a card with no funds), then you need a new id for each retry.
Data can consist of any characters
Boolean
CONDITIONAL
This field will only be populated if you are enabled for Instant Refunds and the acquirer used to process this Refund is configured for Instant Refunds.
Instant Refunds are processed in near real time resulting in the funds being available in the payer's account almost instantly. 'True' indicates that the refund was processed as an Instant Refund. 'False' indicates that the refund was not processed as an Instant Refund. This happens when either the card is not eligible or the gateway was unable to connect to the downstream system.
The values 'true' or 'false'. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#boolean.)
Information about the items the payer purchases with the transaction.
String
CONDITIONAL
The brand of the item.
For example, Dell.
Data can consist of any characters
String
CONDITIONAL
Your category for the item.
Data can consist of any characters
String
CONDITIONAL
Description for the item with information such as size, color, etc.
For example, 'Color:Red, Size:M'
Data can consist of any characters
Only use this parameter group to provide additional line item details required for a better interchange rate for Purchasing Cards, Business and/or Corporate Cards (Level 3).
Check with your payment service provider if Level 3 data is supported for your acquirer.
JSON Text
CONDITIONAL
Use this field to provide line item details that your acquirer requires you to provide.
Data must be provided in JSON format using the record name and field name (separated by a comma) to identify the value provided. Contact your payment service provider for details about the supported fields including the field definitions.
Data is valid Json Format
Integer
CONDITIONAL
A code describing a commodity or a group of commodities pertaining to goods classification.
A number comprising the digits 0-9, having at least one digit. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#nonNegativeInteger.)
Information about the taxes per line item.
Decimal
CONDITIONAL
The tax amount for the tax type defined in order.item[n].detail.tax[m].type for the item.
Note that the tax amount provided must reflect the tax amount applied before a discount was applied.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Decimal
CONDITIONAL
The tax rate (percentage) applied to the item for the tax type defined in order.item[n].detail.tax[m].type.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
String
CONDITIONAL
The tax type for which the amount specified under order.item[n].detail.tax[m].amount has been paid for this item.
The correct value as used by your acquirer may have to be provided. Contact your payment service provider for details.
Data can consist of any characters
Decimal
CONDITIONAL
The discount rate (percentage) applied to this item.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Decimal
CONDITIONAL
The tax rate (percentage) of the tax charged for this item.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
String
CONDITIONAL
The type of tax charged for this item.
The correct value as used by your acquirer may have to be provided. Contact your payment service provider for details.
Data can consist of any characters
Integer
CONDITIONAL
The United Nations Standard Products and Services Code (UNSPSC) for the item.
A number comprising the digits 0-9, having at least one digit. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#nonNegativeInteger.)
Integer
CONDITIONAL
The Universal Product Code (UPC) for the item.
A number comprising the digits 0-9, having at least one digit. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#nonNegativeInteger.)
Enumeration
CONDITIONAL
Provide the industryCategory to send this line item to your acquirer for specialized processing as industry data.
Such processing might have legal obligations, which are your responsibility. Do not provide an industryCategory, unless you are certain it applies to you, and is accepted by your acquirer.
We support the following industry standard processing:US health care processing using the IIAS standard.The supported values for industryCategory are:HEALTHCARE_VISION, HEALTHCARE_DENTAL, HEALTHCARE_PRESCRIPTION, HEALTHCARE_OTHERWe formulate an IIAS message by summing the amounts of all the line items having the same industryCategory. The amount of a line item is:(order.item.unitPrice + order.item.tax) * order.item.quantity
Value must be a member of the following list. The values are case sensitive.
HEALTHCARE_DENTAL
HEALTHCARE_OTHER
HEALTHCARE_PRESCRIPTION
HEALTHCARE_VISION
String
ALWAYS PROVIDED
A short name describing the item.
Data can consist of any characters
Decimal
ALWAYS PROVIDED
The quantity of the item.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
String
CONDITIONAL
The SKU (Stock Keeping Unit) or the item identifier for this item.
Data can consist of any characters
Decimal
CONDITIONAL
The discount amount applied to this item.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
String
CONDITIONAL
The unit of measure used for the item quantity.
The correct value as used by your acquirer may have to be provided. Contact your payment service provider for details.
Data can consist of any characters
Decimal
ALWAYS PROVIDED
The cost price for the item.
This amount is multiplied with the item quantity (item.quantity) to determine the total amount for this item (item.amount). This amount does not include the tax amount and/or discount amount applicable to this item.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Decimal
CONDITIONAL
The tax amount for the item.
This amount is multiplied with the item quantity (item.quantity) to determine the total tax amount for this item.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Decimal
CONDITIONAL
The total item amount for this transaction.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
String
CONDITIONAL
Your note about this transaction.
Data can consist of any characters
Information about the payment plan selected by the cardholder.
Integer
ALWAYS PROVIDED
The number of months for which the payment is deferred.
A number comprising the digits 0-9, having at least one digit. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#nonNegativeInteger.)
Decimal
ALWAYS PROVIDED
The amount of the first payment for this payment plan offer.
The amount for all subsequent payments is provided in item[n].paymentPlanOffer{id}.subsequentPaymentAmount. The amount is expressed as a decimal number in the units of the currency. For example 12.34 in USD is the amount 12 dollars and 34 cents.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Decimal
ALWAYS PROVIDED
The interest rate applied to the purchase amount for this plan.
This field is returned only when plan type is AMEX_PlanAmex.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
String
ALWAYS PROVIDED
The name of the payment plan product for which the offer is provided.
Data can consist of any characters
Integer
ALWAYS PROVIDED
The number of monthly payments payable by the cardholder.
A number comprising the digits 0-9, having at least one digit. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#nonNegativeInteger.)
Alphanumeric + additional characters
ALWAYS PROVIDED
The unique identifier of the payment plan offer that the payer has accepted.
The gateway will use the details of this offer for this transaction. Provide the plan offer ID returned in the PAYMENT_PLAN_OFFERS_INQUIRY response in field
Data may consist of the characters 0-9, a-z, A-Z, '-', '_'
String
ALWAYS PROVIDED
The issuer or acquirer that offers the payment plan may require you to display specific details about the payment plan to the cardholder on the order confirmation page, transaction receipt and/or email confirmation.
Where supported for the issuer or acquirer the gateway makes the receipt text to be displayed available in this field. Note that there may be additional requirements about the content to be displayed (in addition to the receipt text). The text provided in this field may be in the local language or English.
Data can consist of any characters
Decimal
ALWAYS PROVIDED
The amount of each payment for this payment plan offer.
If the amount for the first payment differs, then the amount for the first payment is provided in item[n].paymentPlanOffer{id}.firstPaymentAmount. The amount is expressed as a decimal number in the units of the currency. For example 12.34 in USD is the amount 12 dollars and 34 cents.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Decimal
ALWAYS PROVIDED
The total amount payable by the cardholder, including interest for this plan.
The amount is expressed as a decimal number in the units of the currency. For example 12.34 in USD is the amount 12 dollars and 34 cents. This field is returned only whenplan type is AMEX_PlanAmex.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
ASCII Text
CONDITIONAL
A unique reference generated by the acquirer for a specific merchant interaction.
The reference may be used when contacting the acquirer about a specific transaction.
Data consists of ASCII characters
String
CONDITIONAL
An optional identifier for this transaction.
Data can consist of any characters
Decimal
CONDITIONAL
If the transaction was partially approved (response.gatewayCode=PARTIALLY_APPROVED), this field contains the originally requested amount.
The transaction amount (transaction.amount) and order amount (order.amount) are both set to the actually approved amount.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Boolean
CONDITIONAL
Indicates that this merchant initiated transaction is a resubmission for a previous authorization which failed due to insufficient funds.
A resubmission transaction must also contain the 'scheme transaction Id' from the associated failed transaction. You can provide the referenceOrderId of the relevant order and the gateway will include the 'scheme transaction Id' of the last failed authorization on the order in the resubmission transaction. Alternatively, you can provide the 'scheme transaction Id' of the failed transaction in the resubmission transaction using the field transaction.acquirer.traceId.
The values 'true' or 'false'. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#boolean.)
Use this parameter group when transaction service location is different than your registered business location.
String
CONDITIONAL
The city where cardholder received the service.
Data can consist of any characters
Upper case alphabetic text
CONDITIONAL
The country where cardholder received the service.
Data must consist of the characters A-Z
Alphanumeric + additional characters
CONDITIONAL
The zip or postal code where cardholder received the service.
Data may consist of the characters 0-9, a-z, A-Z, ' ', '-'
String
CONDITIONAL
The state or province where cardholder received the service.
The value must match the second part of the ISO 3166-2 code. For an address in the United States provide the 2-letter ISO 3166-2 state code. For US military bases provide one of AE, AA, AP. For an address in Canada provide the 2-letter ISO 3166-2 province code.
Data can consist of any characters
Decimal
CONDITIONAL
The total shipping and handling amount for the transaction, including taxes on the shipping and/or handling.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Decimal
CONDITIONAL
The tax amount levied on the shipping and handling amount for the transaction.
This amount is included in the shipping and handling amount provided in field transaction.shippingAndHandlingAmount.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Decimal
CONDITIONAL
The tax rate applied to the shipping and handling amount for the transaction to determine the shipping and handling tax amount.
For a tax rate of 2.5% provide 0.025.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Enumeration
CONDITIONAL
Indicates the channel through which you received authorization for the payment for this order from the payer.
For example, set this value to INTERNET if the payer initiated the payment online.
If you have an existing agreement with the payer that authorizes you to process this payment (for example, a recurring payment) then set this value to MERCHANT. You only need to provide transaction.source if you want to override the default value configured for your acquirer link.
Note:
- You can only override the default value if you have the requisite permission.
- The value you provide must match one of those configured by your payment service provider.
- You can only set the transaction source on the initial transaction on an order. It cannot be changed on subsequent transactions.
Value must be a member of the following list. The values are case sensitive.
CALL_CENTRE
Transaction conducted via a call centre.
CARD_PRESENT
Transaction where the card is presented to the merchant.
INTERNET
Transaction conducted over the Internet.
MAIL_ORDER
Transaction received by mail.
MERCHANT
Transaction initiated by you based on an agreement with the payer. For example, a recurring payment, installment payment, or account top-up.
MOTO
Transaction received by mail or telephone.
PAYER_PRESENT
Transaction where a non-card payment method is presented to the Merchant.
SERVICE_PROVIDER
Transaction reported by the acquirer.
TELEPHONE_ORDER
Transaction received by telephone.
VOICE_RESPONSE
Transaction conducted by a voice/DTMF recognition system.
Digits
CONDITIONAL
The System Trace Audit Number (STAN) for the transaction.
The STAN is a unique trace number assigned by the gateway to identify the transaction message sent to the acquirer. It remains unchanged for the life of the transaction.
Data is a number between 1 and 999999 represented as a string.
String
CONDITIONAL
The identifier of the source transaction you wish to reference in this transaction.
For example: This can be the transaction id of the
- -authorization transaction you wish to void or
- -capture or pay transaction you wish to void or refund or.
- -the contactless transaction which was processed with a single tap indicator and you want to provide the PIN in this request.
That is the {transactionId} URL field for REST and the transaction.id field for NVP.
Data can consist of any characters
Use this parameter group to provide a breakdown of tax types, amount per tax type, and rate per tax type included in transaction.taxAmount.
Decimal
CONDITIONAL
The tax amount included in this transaction for the tax type.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Decimal
CONDITIONAL
The tax rate (percentage) used to determine the tax amount included in this transaction for the tax type.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
String
CONDITIONAL
The type of tax included in the transaction amount.
The correct value as used by your acquirer may have to be provided. Contact your payment service provider for details.
Data can consist of any characters
Decimal
CONDITIONAL
The total tax amount for the transaction.
You only need to provide this field when you capture or refund part of the order amount. In this case, the amount must not exceed order.taxAmount. If you provide this field when you capture or refund the full amount of the order, then the value provided must match order.taxAmount.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
String
CONDITIONAL
Indicates your tax status for this transaction.
Data can consist of any characters
String
CONDITIONAL
The terminal configured at the processor/acquirer used to process the transaction.
Data can consist of any characters
Only use the functionality provided in this parameter group if you are a merchant with a card scheme approved Merchant Category Code for Aggregated Transit Fare Collection functionality.
Where the transit fare is not known at the time of travel, you can aggregate these contactless payments within limitations (time periods, amounts) as specified by the card schemes.
Use this parameter group to provide details about an aggregated transit fare or a merchant-initiated, tap-initiated or payer-initiated debt recovery for an aggregated transit fare.
Date
ALWAYS PROVIDED
This is the start date of an aggregation and matches the date of the first travel or first tap within the aggregation period.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
Enumeration
ALWAYS PROVIDED
Provide the transport mode used by the payer for the first trip when fare collection is aggregated across one or more trips as well as for merchant-initiated debt recovery transactions.
Value must be a member of the following list. The values are case sensitive.
CABLE_CAR
Cable Car
COACH
Coach
COMMUTER_TRAIN
Commuter Train
EXPRESS_COMMUTER_TRAIN
Express Commuter Train
FUNICULAR_TRAIN
Funicular Train
HIGH_SPEED_TRAIN
High Speed Train
INTERURBAN_BUS
Interurban Bus
INTER_CITY
Inter City
LIGHT_TRAIN_MASS_TRANSIT
Light Train Mass Transit
LOCOMOTIVE
Locomotive
OTHER
Other
PARA_TRANSIT
Para Transit
PARKING
Parking
POWERED_MOTOR_VEHICLE
Powered Motor Vehicle
REGIONAL_TRAIN
Regional Train
RURAL_BUS
Rural Bus
SELF_DRIVE_VEHICLE
Self Drive Vehicle
TAXI
Taxi
TOLL
Toll
TRAILER
Trailer
TRAIN
Train
URBAN_BUS
Urban Bus
WATER_BORNE_VEHICLE
Water Borne Vehicle
Enumeration
ALWAYS PROVIDED
Indicates if this is a transaction for an aggregated transit fare or a merchant-initiated, tap-initiated or payer-initiated debt recovery for an aggregated transit fare.
Value must be a member of the following list. The values are case sensitive.
DEBT_RECOVERY_MERCHANT_INITIATED
Transaction for a debt recovery for an aggregated transit fare initiated by you (according to the scheme rules).
DEBT_RECOVERY_PAYER_INITIATED
Transaction for a debt recovery for an aggregated transit fare that is initiated by the payer paying off an outstanding debt, for example, via a website or a ticket machine.
DEBT_RECOVERY_TAP_INITIATED
Transaction for a debt recovery for an aggregated transit fare that is initiated by the payer attempting to use their card or mobile device for travel and where the card has an outstanding debt.
FARE
Transaction for an aggregated transit fare that you are submitting either at the start of the travel period (for a nominal amount) or at the end of the travel period (for the total aggregated amount).
FIRST_RIDE_RISK
Transaction fare recovery which falls under the first ride risk framework.
Where the transit fare is known at the time of travel, you must indicate that this is a known fare transaction.
Enumeration
CONDITIONAL
Indicates if this is a transaction for a known fare submitted at the time of travel or after the payer has already gained access to the transit service (deferred Authorization).
Value must be a member of the following list. The values are case sensitive.
DEBT_RECOVERY_MERCHANT_INITIATED
Transaction for a debt recovery for an known transit fare initiated by Merchant (according to the scheme rules).
DEBT_RECOVERY_PAYER_INITIATED
Transaction for a debt recovery for an known transit fare initiated by payer (according to the scheme rules).
DEBT_RECOVERY_TAP_INITIATED
Transaction for a debt recovery for an known transit fare tap initiated (according to the scheme rules).
FARE_DEFERRED_AUTHORIZATION
Known transit fare payment where you are submitting the Authorization after the payer has already gained access to the transit service (deferred Authorization).
FARE_REAL_TIME_AUTHORIZATION
Known transit fare payment where you are submitting the Authorization at the time of travel.
FIRST_RIDE_RISK
Transaction fare recovery which falls under the first ride risk framework.
Enumeration
ALWAYS PROVIDED
Indicates the type of action performed on the order.
Value must be a member of the following list. The values are case sensitive.
AUTHENTICATION
Authentication
AUTHORIZATION
Authorization
AUTHORIZATION_UPDATE
Authorization Update
CAPTURE
Capture
CHARGEBACK
Chargeback
DISBURSEMENT
Disbursement
FUNDING
The transaction transfers money to or from the merchant, without the involvement of a payer. For example, recording monthly merchant service fees from your payment service provider.
PAYMENT
Payment (Purchase)
REFUND
Refund
REFUND_REQUEST
Refund Request
VERIFICATION
Verification
VOID_AUTHORIZATION
Void Authorization
VOID_CAPTURE
Void Capture
VOID_PAYMENT
Void Payment
VOID_REFUND
Void Refund
This parameter group provides a history of the status changes for the transaction (based on response.gatewayCode).The information is only provided if the functionality is supported for the acquirer used to process the transaction.
Enumeration
CONDITIONAL
The new response gateway code for the transaction set at the date and time associated (transaction.update[n].time).
Value must be a member of the following list. The values are case sensitive.
ABORTED
Transaction aborted by payer
ACQUIRER_SYSTEM_ERROR
Acquirer system error occurred processing the transaction
APPROVED
Transaction Approved
APPROVED_PENDING_SETTLEMENT
Transaction Approved - pending batch settlement
AUTHENTICATION_FAILED
Payer authentication failed
BLOCKED
Transaction blocked due to Risk or 3D Secure blocking rules
CANCELLED
Transaction cancelled by payer
DECLINED
The requested operation was not successful. For example, a payment was declined by issuer or payer authentication was not able to be successfully completed.
DECLINED_AVS
Transaction declined due to address verification
DECLINED_AVS_CSC
Transaction declined due to address verification and card security code
DECLINED_CSC
Transaction declined due to card security code
DECLINED_DO_NOT_CONTACT
Transaction declined - do not contact issuer
DECLINED_PAYMENT_PLAN
Transaction declined due to payment plan
DEFERRED_TRANSACTION_RECEIVED
Deferred transaction received and awaiting processing
DUPLICATE_BATCH
Transaction declined due to duplicate batch
EXCEEDED_RETRY_LIMIT
Transaction retry limit exceeded
EXPIRED_CARD
Transaction declined due to expired card
INSUFFICIENT_FUNDS
Transaction declined due to insufficient funds
INVALID_CSC
Invalid card security code
LOCK_FAILURE
Order locked - another transaction is in progress for this order
NOT_ENROLLED_3D_SECURE
Card holder is not enrolled in 3D Secure
NOT_SUPPORTED
Transaction type not supported
PARTIALLY_APPROVED
The transaction was approved for a lesser amount than requested. The approved amount is returned in order.totalAuthorizedAmount.
PENDING
Transaction is pending
REFERRED
Transaction declined - refer to issuer
SUBMITTED
The transaction has successfully been created in the gateway. It is either awaiting submission to the acquirer or has been submitted to the acquirer but the gateway has not yet received a response about the success or otherwise of the payment.
SYSTEM_ERROR
Internal system error occurred processing the transaction
TIMED_OUT
The gateway has timed out the request to the acquirer because it did not receive a response. You can handle the transaction as a declined transaction. Where possible the gateway will attempt to reverse the transaction.
UNKNOWN
The transaction has been submitted to the acquirer but the gateway was not able to find out about the success or otherwise of the payment. If the gateway subsequently finds out about the success of the payment it will update the response code.
UNSPECIFIED_FAILURE
Transaction could not be processed
ASCII Text
CONDITIONAL
The date and time the status change occurred.
Data consists of ASCII characters
String
CONDITIONAL
The Web Services API version that you submitted the request in.
Data can consist of any characters
Errors Copied to clipboard
Information on possible error conditions that may occur while processing an operation using the API.
Enumeration
Broadly categorizes the cause of the error.
For example, errors may occur due to invalid requests or internal system failures.
Value must be a member of the following list. The values are case sensitive.
INVALID_REQUEST
The request was rejected because it did not conform to the API protocol.
REQUEST_REJECTED
The request was rejected due to security reasons such as firewall rules, expired certificate, etc.
SERVER_BUSY
The server did not have enough resources to process the request at the moment.
SERVER_FAILED
There was an internal system failure.
String
Textual description of the error based on the cause.
This field is returned only if the cause is INVALID_REQUEST or SERVER_BUSY.
Data can consist of any characters
String
Indicates the name of the field that failed validation.
This field is returned only if the cause is INVALID_REQUEST and a field level validation error was encountered.
Data can consist of any characters
String
Indicates the code that helps the support team to quickly identify the exact cause of the error.
This field is returned only if the cause is SERVER_FAILED or REQUEST_REJECTED.
Data can consist of any characters
Enumeration
Indicates the type of field validation error.
This field is returned only if the cause is INVALID_REQUEST and a field level validation error was encountered.
Value must be a member of the following list. The values are case sensitive.
INVALID
The request contained a field with a value that did not pass validation.
MISSING
The request was missing a mandatory field.
UNSUPPORTED
The request contained a field that is unsupported.
Enumeration
A system-generated high level overall result of the operation.
Value must be a member of the following list. The values are case sensitive.
ERROR
The operation resulted in an error and hence cannot be processed.