Authenticate Payer
Request to authenticate a payer, i.e. verify the identity of a cardholder. You can subsequently use the resulting authentication data when submitting a financial transaction request to prove that you have performed payer authentication.
You must first invoke the Initiate Authentication operation and where the response indicates that payer authentication is available, you must then invoke the Authenticate Payer operation with the same orderId and transactionId submitted on the Initiate Authentication operation.
To increase the likelihood of the authentication being successful, provide as much information about the payer and the transaction as possible.
If the information in the request is sufficient to allow the authentication scheme to confirm the payer's identity the response will include the authentication data (frictionless flow). Alternatively (challenge flow), it may be necessary for the payer to interact with the authentication scheme to confirm their identity (e.g. by providing a one-time password sent to them by their card issuer). In this case the response will contain an HTML excerpt that you must inject into your page. This will establish the interaction between the payer and the authentication scheme. After authentication has been completed the payer will be redirected back to your website using the URL provided by you in field authentication.redirectResponseUrl in the Authenticate Payer request.
If you are authenticating the payer when establishing a payment agreement with your payer for a series of recurring, installment or unscheduled payments you must provide details about the agreement in the agreement parameter group.
Usage Note
Using the Initiate Authenticate and Authenticate Payer operations for 3-D Secure authentication requires you to manage a variety of authentication flows and understand the 3-D Secure version 2 data flows as published by EMVCo.
A more simple alternatively is to use the gateway's threeDS.js library.
Authentication
This operation requires authentication via one of the following methods:
- Certificate authentication.
-
Basic HTTP authentication as described at
w3.org.
Provide 'merchant.
<your gateway merchant ID>' in the userid portion and your API password in the password portion.
Request
URL Parameters
Alphanumeric + additional characters
REQUIRED
The unique identifier issued to you by your payment provider.
This identifier can be up to 12 characters in length.
Data may consist of the characters 0-9, a-z, A-Z, '-', '_'
Min length: 1 Max length: 40String
REQUIRED
A unique identifier for this order to distinguish it from any other order you create.
Use this identifier when referring to this order in subsequent transactions and in retrieval operations. This value must be unique for every order you create using your merchant profile.
Data can consist of any characters
Min length: 1 Max length: 40String
REQUIRED
Unique identifier for this transaction to distinguish it from any other transaction on the order.
An order can have transactions representing:
- Movement of money. For example, payments and refunds.
- Validations. For example, account verification or 3-D Secure authentication of the payer.
- Undoing other transactions. For example, voiding a payment transaction.
- Chargebacks.
- Fees from your payment service provider.
If you attempt an operation and it fails (eg you try to PAY on a card with no funds), then you need a new id for each retry.
Data can consist of any characters
Min length: 1 Max length: 40Fields
Additional details for account funding transactions (order.purchaseType=ACCOUNT_FUNDING).
Account funding transactions are transactions that pull money from the sender's card account for the purpose of funding another account, the recipient's account. Depending on the type of account funding transaction you may be required to provide some or all the details in this parameter group.
Enumeration
OPTIONAL
Defines the purpose of the account funding payment.If not provided the value is defaulted to OTHER.
Value must be a member of the following list. The values are case sensitive.
CRYPTOCURRENCY_PURCHASE
The funds from this account funding transaction will be used to purchase cryptocurrency.
MERCHANT_SETTLEMENT
The funds from this account funding transaction will be used to settle the proceeds of processing card transactions.
OTHER
The funds from this account funding transaction will be used for any other purpose, e.g. transferring funds from a person to a person or transferring funds into a staged wallet. This is the default value.
PAYROLL
The funds from this account funding transaction will be used to pay salaries.
Details about the recipient who will subsequently receive the funds that you are debiting from the sender in this transaction.
Details about the account of recipient who will subsequently receive the funds that you are debiting from the sender in this transaction.
Enumeration
OPTIONAL
If the recipient account type is an account with an associated card (accountFunding.recipient.account.identifierType=CARD_NUMBER) you must specify the funding method of the card.
If not provided the value is defaulted to UNKNOWN.
Value must be a member of the following list. The values are case sensitive.
CHARGE
The payer has a line of credit with the issuer which must be paid off monthly.
CREDIT
The payer has a revolving line of credit with the issuer.
DEBIT
Funds are immediately debited from the payer's account with the issuer.
UNKNOWN
The account funding method is not known. This is the default value.
String
OPTIONAL
The account identifier for the payment recipient's account.
For example, this may be a card number or bank account number. You must specify the type of identifier in field accountFunding.recipient.account.identifierType. In the response, the value will be masked. The masking format depends on the type of account identifier.
Data can consist of any characters
Enumeration
OPTIONAL
Defines the type of the recipient's account identifier that you have provided in field accountFunding.recipient.account.identifier.
If not provided the value is defaulted to OTHER.
Value must be a member of the following list. The values are case sensitive.
BANK_ACCOUNT_BIC
The recipient's account identifier is a bank account number and Business Identifier Code (BIC).
BANK_ACCOUNT_IBAN
The recipient's account identifier is an International Bank Account Number (IBAN).
BANK_ACCOUNT_NATIONAL
The recipient's account identifier is a bank account number and a national bank identifier, for example, a routing number (RTN).
CARD_NUMBER
The recipient's account identifier is a card number.
EMAIL_ADDRESS
The recipient's account identifier is an email address.
OTHER
The recipient's account identifier type can not be classified using any of the other categories. This is the default value
PHONE_NUMBER
The recipient's account identifier is a phone number.
SOCIAL_NETWORK_PROFILE_ID
The recipient's account identifier is a social network profile ID.
STAGED_WALLET_USER_ID
The recipient's account identifier is a wallet user ID.
Upper case alphabetic text
OPTIONAL
The 3 letter ISO standard alpha country code of the recipient.
Data must consist of the characters A-Z
Date
OPTIONAL
The date of birth of the recipient in yyyy-mm-dd format.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
String
OPTIONAL
First name of the recipient.
Data can consist of any characters
String
OPTIONAL
Last name of the recipient.
Data can consist of any characters
String
OPTIONAL
The post code or zip code of the recipient.
Data can consist of any characters
String
OPTIONAL
The state or province code of the recipient.
The value must match the second part of the ISO 3166-2 code. For an address in the United States provide the 2-letter ISO 3166-2 state code. For US military bases provide one of AE, AA, AP. For an address in Canada provide the 2-letter ISO 3166-2 province code.
Data can consist of any characters
Boolean
OPTIONAL
Defines if the sender and recipient of the account funding payment are the same or not.
If not provided the value is defaulted to FALSE.
JSON boolean values 'true' or 'false'.
Enumeration
OPTIONAL
Defines if the sender is a person, a commercial organization, a non-profit organization or a government
Value must be a member of the following list. The values are case sensitive.
COMMERCIAL_ORGANIZATION
The sender is a commercial organization. Examples include account to account transfers initiated by a commercial organization for the purpose of transferring funds to one of their accounts, business to business payments, and disbursements for insurance claims, payroll, investment dividends, merchant rebates.
GOVERNMENT
The sender is a government or government agency. Examples include government agencies paying salaries, pensions, social benefits or tax credits.
NON_PROFIT_ORGANIZATION
The sender is a non-profit organization. Examples include non-profit organizations delivering emergency aid payments.
PERSON
The sender is a person. Examples include account to account transfers initiated by a person to their own account or a different person's account and adding funds to a staged wallet.
A series of related orders that execute one commercial agreement.
For example, linking the orders for a series of recurring payments (a mobile phone subscription), split tenders (one payment using two cards), or when the merchant offers to take payments by a series of installments (hire purchase).
Enumeration
OPTIONAL
Indicates if all the payments within the agreement use the same amount or if the amount differs between the payments.
The field must be provided for recurring payment agreements.
Value must be a member of the following list. The values are case sensitive.
FIXED
All payments in the recurring payment agreement have the same amount. Examples include magazine subscriptions or gym memberships.
VARIABLE
The amount for the payments within the recurring payment agreement differs between payments. Examples include usage-based charges like utility or phone bills.
Date
OPTIONAL
Date at which your agreement with the payer to process payments expires.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
String
OPTIONAL
Your identifier for the agreement you have with the payer to process payments.
When you collect cards from your payers and store them for later use, you must provide an agreement ID when you use the stored values for:
- Recurring payments: you have an agreement with the payer that authorizes you to automatically debit their account at agreed intervals for fixed or variable amounts. For example, gym membership, phone bills, or magazine subscriptions.
- Installment payments: you have an agreement with the payer that authorizes you to process multiple payments over an agreed period of time for a single purchase. For example, the payer purchases an item for $1000 and pays for it in four monthly installments.
- Unscheduled: you have an agreement with the payer that authorizes you to process future payments when required. For example, the payer authorizes you to process an account top-up transaction for a transit card when the account balance drops below a certain threshold.
Data can consist of any characters
Decimal
OPTIONAL
The maximum amount for a single payment in the series as agreed with the payer under your agreement with them.
The amount must be provided in the currency of the order.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Integer
OPTIONAL
The minimum number of days between payments agreed with the payer under your agreement with them.
JSON number data type, restricted to being positive or zero. In addition, the represented number may have no fractional part.
Integer
OPTIONAL
The number of merchant-initiated payments within the recurring payment agreement.
JSON number data type, restricted to being positive or zero. In addition, the represented number may have no fractional part.
Enumeration
OPTIONAL
The frequency of the payments within the series as agreed with the payer under your agreement with them.
Value must be a member of the following list. The values are case sensitive.
AD_HOC
The agreement if for payments on an ah-hoc basis.
DAILY
The agreement if for a daily payment.
FORTNIGHTLY
The agreement if for a fortnightly payment.
MONTHLY
The agreement if for a monthly payment.
OTHER
The agreement is for payments according to a schedule other than the ones listed in the other enumeration values for this field.
QUARTERLY
The agreement if for a quarterly payment.
TWICE_YEARLY
The agreement if for a payment twice a year.
WEEKLY
The agreement if for a weekly payment.
YEARLY
The agreement if for a yearly payment.
Enumeration
OPTIONAL
The type of commercial agreement that the payer has with you.
Specify the agreement type when you have provided a value for agreement.id and this payment is the first in a series of payments. The default value is OTHER.
The gateway will use the value you specify for subsequent payments in the series.
Value must be a member of the following list. The values are case sensitive.
INSTALLMENT
An agreement where the payer authorizes the payment for a single purchase to be split into a number of payments processed at agreed intervals. For example, pay for a purchase in six monthly installments.
OTHER
An agreement where the merchant wants to link related payments for any purpose other than processing recurring, installment, or unscheduled payments. For example, split tender payments.
RECURRING
An agreement where the payer authorizes the merchant to process payments for recurring bills or invoices at agreed intervals (for example, weekly, monthly). The amount might be fixed or variable.
UNSCHEDULED
An agreement where the payer authorizes the merchant to automatically deduct funds for a payment for an agreed purchase when required (unscheduled). For example, auto top-ups when the account value falls below a threshold.
String
= AUTHENTICATE_PAYER
FIXED
Any sequence of zero or more unicode characters.
Details of the payer's billing address.
The payer's billing address.
This data may be used to qualify for better interchange rates on corporate purchase card transactions.
String
OPTIONAL
The city portion of the address.
Data can consist of any characters
String
OPTIONAL
The name of the company associated with this address.
Data can consist of any characters
Upper case alphabetic text
OPTIONAL
The 3 letter ISO standard alpha country code of the address.
Data must consist of the characters A-Z
Alphanumeric + additional characters
OPTIONAL
The post code or zip code of the address.
Data may consist of the characters 0-9, a-z, A-Z, ' ', '-'
String
OPTIONAL
The state or province of the address.
Data can consist of any characters
String
OPTIONAL
The three character ISO 3166-2 country subdivision code for the state or province of the address.
Providing this field might improve your payer experience for 3-D Secure payer authentication.
Data can consist of any characters
String
OPTIONAL
The first line of the address.
For example, this may be the street name and number, or the Post Office Box details.
Data can consist of any characters
String
OPTIONAL
The second line of the address (if provided).
Data can consist of any characters
String
OPTIONAL
A transient identifier for the request, that can be used to match the response to the request.
The value provided is not validated, does not persist in the gateway, and is returned as provided in the response to the request.
Data can consist of any characters
Information associated with the customer's account.
Email
OPTIONAL
The email address of the customer.
The field format restriction ensures that the email address is longer than 3 characters and adheres to a generous subset of valid RFC 2822 email addresses.
Ensures that the email address is longer than 3 characters and adheres to a generous subset of valid RFC 2822 email addresses
String
OPTIONAL
The payer's first name.
Data can consist of any characters
String
OPTIONAL
The payer's last or surname.
Data can consist of any characters
Telephone Number
OPTIONAL
The payer's mobile phone or cell phone number in ITU-T E123 format, for example +1 607 1234 5678
The number consists of:
- '+'
- country code (1, 2 or 3 digits)
- 'space'
- national number ( which may embed single spaces characters for readability).
Data consists of '+', country code (1, 2 or 3 digits), 'space', and national number (which may embed single space characters for readability)
Telephone Number
OPTIONAL
The payer's phone number in ITU-T E123 format, for example +1 607 1234 456
The number consists of:
- '+'
- country code (1, 2 or 3 digits)
- 'space'
- national number ( which may embed single spaces characters for readability).
Data consists of '+', country code (1, 2 or 3 digits), 'space', and national number (which may embed single space characters for readability)
String
OPTIONAL
The tax registration identifier of the customer.
Data can consist of any characters
Information about the device used by the payer for this transaction.
String
OPTIONAL
The telephone number captured by ANI (Automatic Number Identification) when the customer calls to place the order.
Data can consist of any characters
String
OPTIONAL
The 2 digit ANI information identifier provided by the telephone company to indicate the call type, for example, cellular (61-63), toll free (24,25), etc.
Data can consist of any characters
String
OPTIONAL
The User-Agent header of the browser the customer used to place the order.For example, MOZILLA/4.0 (COMPATIBLE; MSIE 5.0; WINDOWS 95)
You must provide a value in this field if you are performing 3-D Secure authentication of the payer and set authentication.channel = PAYER_BROWSER.
Data can consist of any characters
String
OPTIONAL
Information collected about a remote computing device for the purpose of providing a unique identifier for the device.
For example, session ID, blackbox ID.
Data can consist of any characters
String
OPTIONAL
The name of the server to which the customer is connected.
Data can consist of any characters
String
OPTIONAL
The IP address of the device used by the payer, in nnn.nnn.nnn.nnn format.
Data can consist of any characters
String
OPTIONAL
The mobile phone manufacturer's identifier for the model of the mobile device used to initiate the payment.
Data can consist of any characters
Information about the order associated with this transaction.
Decimal
OPTIONAL
The total amount for the order. This is the net amount plus any merchant charge amounts.If you provide any sub-total amounts, then the sum of these amounts (order.itemAmount, order.taxAmount, order.shippingAndHandlingAmount, order.cashbackAmount, order.gratuityAmount, order.merchantCharge.amount and order.dutyAmount), minus the order.discountAmount must equal the net amount.
The value of this field in the response is zero if payer funds are not transferred.
Either Amount or netAmount must be provided
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Enumeration
OPTIONAL
Indicates if you expect to capture the full order amount for which you are requesting authorization.
If you do not provide a value for order.certainty the default configured for you by your payment service provider will be used. The value provided in the response shows the value the gateway sent to the acquirer
Value must be a member of the following list. The values are case sensitive.
ESTIMATED
The amount authorized is an estimate of the amount that will be captured. It is possible that the amount captured will be less, or might not be captured at all.
FINAL
The full authorized amount is expected to be captured within the mandated time. The order will only be cancelled in exceptional circumstances (for example, the payer cancelled their purchase).
Upper case alphabetic text
REQUIRED
The currency of the order expressed as an ISO 4217 alpha code, e.g. USD.
Data must consist of the characters A-Z
String
OPTIONAL
Information about this order that is of interest to you.
For example order.custom.X, where 'X' is defined by you and must be less than 100 characters from the set A-Z, a-z, 0-9. For example, order.custom.salesRegion. You can specify up to 50 such fields. They are not sent to acquirers.
Data can consist of any characters
String
OPTIONAL
A note from the payer about this order.
Data can consist of any characters
Date
OPTIONAL
The date the payer placed the order.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd.
ASCII Text
OPTIONAL
The payer's own reference for the order.
This reference may assist the payer to identify the order in their system. For example, a purchase order number, project identifier, or cost center.
Data consists of ASCII characters
String
OPTIONAL
Short textual description of the contents of the order.
Data can consist of any characters
Information about a price reduction you have applied to the order.
For example, you may apply discounts for trade, employees, bulk purchase, or a sales promotion.
Decimal
OPTIONAL
The total amount of the discount you have applied to the order.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
String
OPTIONAL
The code you use to identify the reason for the discount.
Data can consist of any characters
String
OPTIONAL
A description of your reason for the discount.
Data can consist of any characters
Decimal
OPTIONAL
The duty amount (also known as customs tax, tariff or dues) for the order.
Data is a decimal number.
String
OPTIONAL
The invoice number you issued for this order.
Data can consist of any characters
Decimal
OPTIONAL
The total item amount for the order.
If you do not provide this value but provide line item data, then this amount is calculated as the sum of the item.quantity times the item.unitPrice for all the line items (total item amount).
If you provide both this value and line item data, then the order.itemAmount MUST equal the total item amount.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
String
OPTIONAL
Your tax registration identifier provided by the Local/State/Province tax authority.
If you are a Canadian merchant, use this field to provide your Tax Registration ID for paying Provincial Sales Tax (PST).
Data can consist of any characters
Use this parameter group to provide additional information if you are a marketplace.You are considered a marketplace if you operate an electronic commerce website or mobile application that brings together payers and retailers and you are selling the goods or services on behalf of the retailer.In this case, the card schemes may require you to register with them as a marketplace and assign you a Marketplace ID.
You should provide this identifier to your payment service provider so that the gateway can automatically include it in all transaction messages to your acquirer.
Enumeration
OPTIONAL
Provide information about the location of the retailers for goods or services included in this order.Where a retailer is located in a country different from your country, they are considered a foreign retailer, otherwise they are considered a domestic retailer.
Value must be a member of the following list. The values are case sensitive.
DOMESTIC_ONLY
The order only contains items from domestic retailers.
FOREIGN_AND_DOMESTIC
The order contains items from both foreign and domestic retailers.
FOREIGN_ONLY
The order only contains items from foreign retailers.
Information about additional fees that you are charging the payer for processing the payment for this order, for example, a surcharge.
Decimal
OPTIONAL
The amount of the additional fee that you are charging the payer.
If you provide a charge amount, you must include it in the total amount for the order.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Enumeration
REQUIRED
The type of the additional fee that you are charging the payer.
Value must be a member of the following list. The values are case sensitive.
SURCHARGE
A fee that covers your cost of accepting accepting a payment method.
Decimal
OPTIONAL
The amount payable for the order before merchant charge amount is applied.
If you specify a net amount the gateway will calculate the merchant charge amount for you based on the charge type (order.merchantCharge.type) provided in the request. Alternatively, you can specify the merchant charge amount (order.merchantCharge.amount) yourself.
Either Amount or netAmount must be provided
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
String
OPTIONAL
Your identifier for the part of your organization that is responsible for the order.
You might provide this data when you want to track the accountability for the order. For example, store number, sales region, branch, or profit center
Data can consist of any characters
Enumeration
OPTIONAL
Indicates the purchase of specific types of goods or services.
You must provide a value if your Merchant Category Code (MCC) is one of the following:
6051 (Quasi Cash – Merchant or Non-Financial Institutions – Foreign Currency, Non-Fiat Currency) and this transaction is for the purchase of cryptocurrency. Set the value to CRYPTOCURRENCY.
6211 (Securities – Brokers/Dealers) and this transaction is for the purchase of high-risk securities. Set the value to HIGH_RISK_SECURITIES.
6012 (Merchandise and Services—Customer Financial Institutions) or 6051 (Non-Financial Institutions – Foreign Currency, Non-Fiat Currency) and this transaction is for debt repayment. Set the value to DEBT_REPAYMENT.
If the transaction pulls money from an account for the purpose of crediting another account you must set purchase type to ACCOUNT_FUNDING.
You may set purchase type to OTHER for any other type of payment.
Value must be a member of the following list. The values are case sensitive.
ACCOUNT_FUNDING
The transaction pulls money from an account for the purpose of crediting another account. You may be required to provide additional details about the account funding transaction in the accountFunding parameter group.
CRYPTOCURRENCY
The transaction is for the purchase of a cryptocurrency.
DEBT_REPAYMENT
You may be required to provide additional details about the debt repayment in the debtRepayment parameter group.
HIGH_RISK_SECURITIES
The transaction is for the purchase of high-risk securities.
OTHER
Use this value if the purchase type for the transaction does not fit in any of the other categories.
String
OPTIONAL
The name of the person who requested the goods or services.
Data can consist of any characters
Decimal
OPTIONAL
The total shipping and handling amount for the order, including taxes on the shipping and/or handling.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Decimal
OPTIONAL
The tax amount levied on the shipping and handling amount for the order.
This amount is included in the shipping and handling amount provided in field order.shippingAndHandlingAmount.
Data is a decimal number.
Decimal
OPTIONAL
The tax rate applied to the shipping and handling amount for the order to determine the shipping and handling tax amount.
For a tax rate of 2.5% provide 0.025.
Data is a decimal number.
Information about orders for items not yet available (pre-order) or for items previously purchased (reorder).
Boolean
OPTIONAL
Indicates that the purchase includes merchandise with a future availability or release date.
JSON boolean values 'true' or 'false'.
Date
OPTIONAL
The date that preordered items are expected to be available.
Provide this field if the payer is ordering items before you have them available for purchase.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
Boolean
OPTIONAL
Indicates that the purchase includes merchandise that the payer has previously ordered.
JSON boolean values 'true' or 'false'.
Use this parameter group to provide a breakdown of tax types, amount per tax type, and rate per tax type included in order.taxAmount.
Decimal
OPTIONAL
The tax amount included in this order for the tax type.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Decimal
OPTIONAL
The tax rate (percentage) used to determine the tax amount included in this order for the tax type.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
String
OPTIONAL
The type of tax included in the order amount.
The correct value as used by your acquirer may have to be provided. Contact your payment service provider for details.
Data can consist of any characters
Decimal
OPTIONAL
The total tax amount for the order.
If you do not provide this value but provide line item data, then this amount is calculated as the sum of the item.quantity times the item.unitTaxAmount for all the line items (total tax amount).
If you provide both this value and line item data, then the order.taxAmount MUST equal the total tax amount.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
String
OPTIONAL
Your tax registration identifier provided by the Federal/National tax authority (for example, federal tax identification number, ABN).
If you are a Canadian merchant, use this field to provide your Tax Registration ID for paying Harmonized Sales Tax (HST) or Goods and Services Tax (GST) collected by the Canada Revenue Agency.
Data can consist of any characters
Enumeration
OPTIONAL
Indicates your tax status for this order.
Value must be a member of the following list. The values are case sensitive.
EXEMPT
Indicates that you are exempt from tax.
NOT_EXEMPT
Indicates that you are not exempt from tax.
NOT_PROVIDED
Indicates that you are not providing information about being exempt from tax.
Information relevant for Transaction Filtering.
Allows you to provide the Address Verification Service (AVS) Response Code Transaction Filtering rules to be applied to the transactions for this order.
If provided, these rules override the AVS Response Code Transaction Filtering rules you have configured in Merchant Administration.
Enumeration
REQUIRED
The action to be performed for the Address Verification Service (AVS) Response Code.
Value must be a member of the following list. The values are case sensitive.
NO_ACTION
No action should be taken by the gateway.
REJECT
The gateway must reject the transaction.
REVIEW
The gateway must mark this transaction as requiring a review.
Enumeration
REQUIRED
The Address Verification Service (AVS) Response Code for which you are defining the rule.
Value must be a member of the following list. The values are case sensitive.
ADDRESS_MATCH
Street address matched
ADDRESS_ZIP_MATCH
Street address and zip/postcode were matched
NAME_ADDRESS_MATCH
Card holder name and street address matched
NAME_MATCH
Card holder name matched
NAME_ZIP_MATCH
Card holder name and zip/postcode matched
NOT_AVAILABLE
No data available from issuer or AVS data not supported for transaction
NOT_REQUESTED
AVS not requested
NOT_VERIFIED
AVS could not be verified for an international transaction
NO_MATCH
No match
SERVICE_NOT_AVAILABLE_RETRY
Issuer system is unavailable. Retry can be attempted
SERVICE_NOT_SUPPORTED
Service currently not supported by acquirer or merchant
ZIP_MATCH
Zip/postcode matched. Street address not matched
Information about payments that transfer money to another store of value, such as a gift card or gaming chips.
Enumeration
OPTIONAL
The type of value store to which money is being transferred.
The default value is NOT_A_TRANSFER.
Value must be a member of the following list. The values are case sensitive.
ACCOUNT_FUNDING
Payment to add funds to the payer's account with the merchant. These funds can be used for future purchases.
NOT_A_TRANSFER
This payment is not for the purpose of transferring money to another store of value. It is a payment for goods or services.
PREPAID_LOAD
Payment to add funds to a prepaid card or gift card.
QUASI_CASH_TRANSACTION
Payment for items that are directly convertible to cash. For example, money orders, casino gaming chips, or traveller's checks.
Decimal
OPTIONAL
The amount of money being transferred, in units of order.valueTransfer.currency.
The default value is order.amount
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Upper case alphabetic text
OPTIONAL
The currency of the store.
If the money is being transferred to multiple currencies, then use the currency of the highest transferred value.
The default value is order.currency.
Data must consist of the characters A-Z
Integer
OPTIONAL
The number of prepaid or gift card being purchased.
The default value is one when you set order.valueTransfer.accountType = PREPAID_LOAD. For all other values of order.valueTransfer.accountType the default is zero.
JSON number data type, restricted to being positive or zero. In addition, the represented number may have no fractional part.
ASCII Text
OPTIONAL
Identifier of the payment session containing values for any of the request fields to be used in this operation.
Values provided in the request will override values contained in the session.
Data consists of ASCII characters
ASCII Text
OPTIONAL
Use this field to implement optimistic locking of the session content.
Do this if you make business decisions based on data from the session and wish to ensure that the same data is being used for the request operation.
To use optimistic locking, record session.version when you make your decisions, and then pass that value in session.version when you submit your request operation to the gateway.
If session.version provided by you does not match that stored against the session, the gateway will reject the operation with error.cause=INVALID_REQUEST.
See Making Business Decisions Based on Session Content.
Data consists of ASCII characters
Shipping information for this order.
The address to which this order will be shipped.
String
OPTIONAL
The city portion of the address.
Data can consist of any characters
String
OPTIONAL
The name of the company associated with this address.
Data can consist of any characters
Upper case alphabetic text
OPTIONAL
The 3 letter ISO standard alpha country code of the address.
Data must consist of the characters A-Z
Alphanumeric + additional characters
OPTIONAL
The post code or zip code of the address.
Data may consist of the characters 0-9, a-z, A-Z, ' ', '-'
Enumeration
OPTIONAL
Indicates whether the shipping address provided is the same as the payer's billing address.
Provide this value if you are not providing the full shipping and billing addresses, but you can affirm that they are the same or different.
The default value for this field is:
SAME - if the shipping and billing address are supplied, and all fields are the same (ignoring non-alphanumerics).
DIFFERENT - if the shipping and billing address are supplied, and at least one field is different (ignoring non-alphanumerics).
UNKNOWN - either shipping address or billing address is absent.
Value must be a member of the following list. The values are case sensitive.
DIFFERENT
The shipping and billing addresses are different.
SAME
The shipping and billing addresses are the same.
UNKNOWN
It is not known if the shipping and billing addresses are the same.
Enumeration
OPTIONAL
How you obtained the shipping address.
Value must be a member of the following list. The values are case sensitive.
ADDRESS_ON_FILE
Order shipped to an address that you have on file.
NEW_ADDRESS
Order shipped to an address provided by the payer for this transaction.
String
OPTIONAL
The state or province of the address.
Data can consist of any characters
String
OPTIONAL
The three character ISO 3166-2 country subdivision code for the state or province of the address.
Providing this field might improve your payer experience for 3-D Secure payer authentication.
Data can consist of any characters
String
OPTIONAL
The first line of the address.
For example, this may be the street name and number, or the Post Office Box details.
Data can consist of any characters
String
OPTIONAL
The second line of the address (if provided).
Data can consist of any characters
Details of the contact person at the address the goods will be shipped to.
Email
OPTIONAL
The contact person's email address.
The field format restriction ensures that the email address is longer than 3 characters and adheres to a generous subset of valid RFC 2822 email addresses.
Ensures that the email address is longer than 3 characters and adheres to a generous subset of valid RFC 2822 email addresses
String
OPTIONAL
The first name of the person to whom the order is being shipped.
Data can consist of any characters
String
OPTIONAL
The last name or surname of the person to whom the order is being shipped.
Data can consist of any characters
Telephone Number
OPTIONAL
The contact person's mobile phone or cell phone number in ITU-T E123 format, for example +1 607 1234 5678
The number consists of:
- '+'
- country code (1, 2 or 3 digits)
- 'space'
- national number ( which may embed single spaces characters for readability).
Data consists of '+', country code (1, 2 or 3 digits), 'space', and national number (which may embed single space characters for readability)
Telephone Number
OPTIONAL
The contact person's phone number in ITU-T E123 format, for example +1 607 1234 456
The number consists of:
- '+'
- country code (1, 2 or 3 digits)
- 'space'
- national number ( which may embed single spaces characters for readability).
Data consists of '+', country code (1, 2 or 3 digits), 'space', and national number (which may embed single space characters for readability)
Enumeration
OPTIONAL
Indicates whether the supplied name for the recipient of shipping matches the cardholder name.
Provide this value if you are not providing the full name or cardholder name, but you can affirm that they are the same or different.
Default value is UNKNOWN
Value must be a member of the following list. The values are case sensitive.
DIFFERENT
The shipping and billing addresses are different.
SAME
The shipping and billing addresses are the same.
UNKNOWN
It is not known if the shipping and billing addresses are the same.
Enumeration
OPTIONAL
The shipping method used for delivery of this order.
Value must be a member of the following list. The values are case sensitive.
ELECTRONIC
Electronic delivery.
GROUND
Ground (4 or more days).
NOT_SHIPPED
Order for goods that are not shipped (for example, travel and event tickets)
OVERNIGHT
Overnight (next day).
PICKUP
Shipped to a local store for pick up.
PRIORITY
Priority (2-3 days).
SAME_DAY
Same day.
Alphanumeric + additional characters
OPTIONAL
The post code or zip code of the address the order is shipped from.
Data may consist of the characters 0-9, a-z, A-Z, ' ', '-'
The details describing the source of the funds to be used.
For card payments these may be represented by combining one or more of the following: explicitly provided card details, a session identifier which the gateway will use to look up the card details and/or a card token. Precedence rules will be applied in that explicitly provided card details will override session card details which will override card token details. Each of these may represent partial card details, however the combination must result in a full and complete set of card details. See Using Multiple Sources of Card Details for examples.
Information about the source of funds when it is directly provided (as opposed to via a token or session).
For browser payments, the source of funds details are usually collected from the payer on the payment provider's website and provided to you when you retrieve the transaction details (for a successful transaction). However, for some payment types (such as giropay), you must collect the information from the payer and supply it here.
Details about the card.
Use this parameter group when you have sourced payment details using:
Cards: the card details entered directly or collected using a Point of Sale (POS) terminal.
Device payment methods such as Apple Pay, Android Pay, Samsung Pay or Google Pay.
Digital wallets such as Masterpass, Visa Checkout or Amex Express Checkout.
Card scheme tokens where the card was tokenized using a card scheme tokenization service such as Mastercard Digital Enablement Service (MDES).
If the payer chose to pay using a device you must provide payment details in this parameter group.
Use this parameter group when accepting payments using device payment methods such as Apple Pay, Android Pay or Samsung Pay.
Details used to process a digital payment where the payment data keys for the online payment cryptogram are provided using the 3-D Secure format.
Use this parameter group for:
- • Device payments: if you decrypt the payment token yourself. In this case, you source these fields directly from the decrypted payment token.
You do not need to use this parameter group if you provide the payment token in sourceOfFunds.provided.card.devicePayment.paymentToken. - • Card scheme tokens: if you decrypt the transaction credentials yourself.
Digits
OPTIONAL
The Electronic Commerce Indicator generated for payments made using a device payment method.
You source this field directly from the decrypted payment token.
This field is not applicable for payments using digital wallets or card scheme tokens.
Data is a string that consists of the characters 0-9.
Base64
OPTIONAL
A cryptogram used to authenticate the transaction.Use this field for:
- • Device payments: source this field directly from the decrypted payment token.
- • Card scheme tokens: source this field directly from the decrypted transaction credentials.
Data is Base64 encoded
Enumeration
OPTIONAL
The format of the cryptogram provided for the digital payment.Use this field for:
- • Device payments: provide the cryptogram format when you decrypt the payment token and provide the payment details (including the online payment cryptogram) in the transaction request.
This field does not apply to Card Scheme token payments.
Value must be a member of the following list. The values are case sensitive.
3DSECURE
The payment data keys for the online payment cryptogram are provided using the 3-D Secure format.
EMV
The payment data keys for the online payment cryptogram are provided using the EMV format.
String
OPTIONAL
This is the payment token that you received from the device's payment SDK.
For example:
For Apple Pay - this is the PKPaymentToken.paymentData value.
For Google - this is PaymentMethodToken.getToken().
Note 1: The gateway API considers this value to be a string, NOT JSON itself. Therefore when using the JSON gateway API, this field will typically look like:
"sourceOfFunds": {
"provided": {
"card": {
"devicePayment": {
"paymentToken": "{\"data\":\"869ss19ew ....
Note 2: The gateway will ignore the currency and amount information in the payment token, and will instead use the values passed on the amount and currency fields. For normal usage, you should populate those fields with the exact same values as you got from the SDK.
Data can consist of any characters
Expiry date, as shown on the card.
Digits
REQUIRED
Month, as shown on the card.
If using a scheme token this is the token expiry month.
Months are numbered January=1, through to December=12.
Data is a number between 1 and 12 represented as a string.
Digits
REQUIRED
Year, as shown on the card.
If using a scheme token this is the token expiry year.
The Common Era year is 2000 plus this value.
Data is a string that consists of the characters 0-9.
String
OPTIONAL
The cardholder's name as printed on the card.
Data can consist of any characters
Digits
OPTIONAL
Credit card number as printed on the card.
Data is a string that consists of the characters 0-9.
Digits
OPTIONAL
Card verification code, as printed on the back or front of the card or as provided for a card scheme token.
Data is a string that consists of the characters 0-9.
Alphanumeric
OPTIONAL
Gateway token that uniquely identifies a card and associated details.
Data may consist of the characters 0-9, a-z, A-Z
Response
Fields
Additional details for account funding transactions (order.purchaseType=ACCOUNT_FUNDING).
Account funding transactions are transactions that pull money from the sender's card account for the purpose of funding another account, the recipient's account. Depending on the type of account funding transaction you may be required to provide some or all the details in this parameter group.
Enumeration
CONDITIONAL
Defines the purpose of the account funding payment.If not provided the value is defaulted to OTHER.
Value must be a member of the following list. The values are case sensitive.
CRYPTOCURRENCY_PURCHASE
The funds from this account funding transaction will be used to purchase cryptocurrency.
MERCHANT_SETTLEMENT
The funds from this account funding transaction will be used to settle the proceeds of processing card transactions.
OTHER
The funds from this account funding transaction will be used for any other purpose, e.g. transferring funds from a person to a person or transferring funds into a staged wallet. This is the default value.
PAYROLL
The funds from this account funding transaction will be used to pay salaries.
Details about the recipient who will subsequently receive the funds that you are debiting from the sender in this transaction.
Details about the account of recipient who will subsequently receive the funds that you are debiting from the sender in this transaction.
Enumeration
CONDITIONAL
If the recipient account type is an account with an associated card (accountFunding.recipient.account.identifierType=CARD_NUMBER) you must specify the funding method of the card.
If not provided the value is defaulted to UNKNOWN.
Value must be a member of the following list. The values are case sensitive.
CHARGE
The payer has a line of credit with the issuer which must be paid off monthly.
CREDIT
The payer has a revolving line of credit with the issuer.
DEBIT
Funds are immediately debited from the payer's account with the issuer.
UNKNOWN
The account funding method is not known. This is the default value.
String
CONDITIONAL
The account identifier for the payment recipient's account.
For example, this may be a card number or bank account number. You must specify the type of identifier in field accountFunding.recipient.account.identifierType. In the response, the value will be masked. The masking format depends on the type of account identifier.
Data can consist of any characters
Enumeration
CONDITIONAL
Defines the type of the recipient's account identifier that you have provided in field accountFunding.recipient.account.identifier.
If not provided the value is defaulted to OTHER.
Value must be a member of the following list. The values are case sensitive.
BANK_ACCOUNT_BIC
The recipient's account identifier is a bank account number and Business Identifier Code (BIC).
BANK_ACCOUNT_IBAN
The recipient's account identifier is an International Bank Account Number (IBAN).
BANK_ACCOUNT_NATIONAL
The recipient's account identifier is a bank account number and a national bank identifier, for example, a routing number (RTN).
CARD_NUMBER
The recipient's account identifier is a card number.
EMAIL_ADDRESS
The recipient's account identifier is an email address.
OTHER
The recipient's account identifier type can not be classified using any of the other categories. This is the default value
PHONE_NUMBER
The recipient's account identifier is a phone number.
SOCIAL_NETWORK_PROFILE_ID
The recipient's account identifier is a social network profile ID.
STAGED_WALLET_USER_ID
The recipient's account identifier is a wallet user ID.
Upper case alphabetic text
CONDITIONAL
The 3 letter ISO standard alpha country code of the recipient.
Data must consist of the characters A-Z
Date
CONDITIONAL
The date of birth of the recipient in yyyy-mm-dd format.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
String
CONDITIONAL
First name of the recipient.
Data can consist of any characters
String
CONDITIONAL
Last name of the recipient.
Data can consist of any characters
String
CONDITIONAL
The post code or zip code of the recipient.
Data can consist of any characters
String
CONDITIONAL
The state or province code of the recipient.
The value must match the second part of the ISO 3166-2 code. For an address in the United States provide the 2-letter ISO 3166-2 state code. For US military bases provide one of AE, AA, AP. For an address in Canada provide the 2-letter ISO 3166-2 province code.
Data can consist of any characters
Boolean
CONDITIONAL
Defines if the sender and recipient of the account funding payment are the same or not.
If not provided the value is defaulted to FALSE.
JSON boolean values 'true' or 'false'.
Enumeration
CONDITIONAL
Defines if the sender is a person, a commercial organization, a non-profit organization or a government
Value must be a member of the following list. The values are case sensitive.
COMMERCIAL_ORGANIZATION
The sender is a commercial organization. Examples include account to account transfers initiated by a commercial organization for the purpose of transferring funds to one of their accounts, business to business payments, and disbursements for insurance claims, payroll, investment dividends, merchant rebates.
GOVERNMENT
The sender is a government or government agency. Examples include government agencies paying salaries, pensions, social benefits or tax credits.
NON_PROFIT_ORGANIZATION
The sender is a non-profit organization. Examples include non-profit organizations delivering emergency aid payments.
PERSON
The sender is a person. Examples include account to account transfers initiated by a person to their own account or a different person's account and adding funds to a staged wallet.
A series of related orders that execute one commercial agreement.
For example, linking the orders for a series of recurring payments (a mobile phone subscription), split tenders (one payment using two cards), or when the merchant offers to take payments by a series of installments (hire purchase).
Enumeration
CONDITIONAL
Indicates if all the payments within the agreement use the same amount or if the amount differs between the payments.
The field must be provided for recurring payment agreements.
Value must be a member of the following list. The values are case sensitive.
FIXED
All payments in the recurring payment agreement have the same amount. Examples include magazine subscriptions or gym memberships.
VARIABLE
The amount for the payments within the recurring payment agreement differs between payments. Examples include usage-based charges like utility or phone bills.
Date
CONDITIONAL
Date at which your agreement with the payer to process payments expires.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
String
CONDITIONAL
Your identifier for the agreement you have with the payer to process payments.
When you collect cards from your payers and store them for later use, you must provide an agreement ID when you use the stored values for:
- Recurring payments: you have an agreement with the payer that authorizes you to automatically debit their account at agreed intervals for fixed or variable amounts. For example, gym membership, phone bills, or magazine subscriptions.
- Installment payments: you have an agreement with the payer that authorizes you to process multiple payments over an agreed period of time for a single purchase. For example, the payer purchases an item for $1000 and pays for it in four monthly installments.
- Unscheduled: you have an agreement with the payer that authorizes you to process future payments when required. For example, the payer authorizes you to process an account top-up transaction for a transit card when the account balance drops below a certain threshold.
Data can consist of any characters
Decimal
CONDITIONAL
The maximum amount for a single payment in the series as agreed with the payer under your agreement with them.
The amount must be provided in the currency of the order.
Data is a decimal number.
Integer
CONDITIONAL
The minimum number of days between payments agreed with the payer under your agreement with them.
JSON number data type, restricted to being positive or zero. In addition, the represented number may have no fractional part.
Integer
CONDITIONAL
The number of merchant-initiated payments within the recurring payment agreement.
JSON number data type, restricted to being positive or zero. In addition, the represented number may have no fractional part.
Enumeration
CONDITIONAL
The frequency of the payments within the series as agreed with the payer under your agreement with them.
Value must be a member of the following list. The values are case sensitive.
AD_HOC
The agreement if for payments on an ah-hoc basis.
DAILY
The agreement if for a daily payment.
FORTNIGHTLY
The agreement if for a fortnightly payment.
MONTHLY
The agreement if for a monthly payment.
OTHER
The agreement is for payments according to a schedule other than the ones listed in the other enumeration values for this field.
QUARTERLY
The agreement if for a quarterly payment.
TWICE_YEARLY
The agreement if for a payment twice a year.
WEEKLY
The agreement if for a weekly payment.
YEARLY
The agreement if for a yearly payment.
Enumeration
CONDITIONAL
The type of commercial agreement that the payer has with you.
Specify the agreement type when you have provided a value for agreement.id and this payment is the first in a series of payments. The default value is OTHER.
The gateway will use the value you specify for subsequent payments in the series.
Value must be a member of the following list. The values are case sensitive.
INSTALLMENT
An agreement where the payer authorizes the payment for a single purchase to be split into a number of payments processed at agreed intervals. For example, pay for a purchase in six monthly installments.
OTHER
An agreement where the merchant wants to link related payments for any purpose other than processing recurring, installment, or unscheduled payments. For example, split tender payments.
RECURRING
An agreement where the payer authorizes the merchant to process payments for recurring bills or invoices at agreed intervals (for example, weekly, monthly). The amount might be fixed or variable.
UNSCHEDULED
An agreement where the payer authorizes the merchant to automatically deduct funds for a payment for an agreed purchase when required (unscheduled). For example, auto top-ups when the account value falls below a threshold.
Information on the billing address including the contact details of the payer.
The payer's billing address.
This data may be used to qualify for better interchange rates on corporate purchase card transactions.
String
CONDITIONAL
The city portion of the address.
Data can consist of any characters
String
CONDITIONAL
The name of the company associated with this address.
Data can consist of any characters
Upper case alphabetic text
CONDITIONAL
The 3 letter ISO standard alpha country code of the address.
Data must consist of the characters A-Z
Alphanumeric + additional characters
CONDITIONAL
The post code or zip code of the address.
Data may consist of the characters 0-9, a-z, A-Z, ' ', '-'
String
CONDITIONAL
The state or province of the address.
Data can consist of any characters
String
CONDITIONAL
The three character ISO 3166-2 country subdivision code for the state or province of the address.
Providing this field might improve your payer experience for 3-D Secure payer authentication.
Data can consist of any characters
String
CONDITIONAL
The first line of the address.
For example, this may be the street name and number, or the Post Office Box details.
Data can consist of any characters
String
CONDITIONAL
The second line of the address (if provided).
Data can consist of any characters
String
CONDITIONAL
A transient identifier for the request, that can be used to match the response to the request.
The value provided is not validated, does not persist in the gateway, and is returned as provided in the response to the request.
Data can consist of any characters
Information about the customer, including their contact details.
Email
CONDITIONAL
The email address of the customer.
The field format restriction ensures that the email address is longer than 3 characters and adheres to a generous subset of valid RFC 2822 email addresses.
Ensures that the email address is longer than 3 characters and adheres to a generous subset of valid RFC 2822 email addresses
String
CONDITIONAL
The payer's first name.
Data can consist of any characters
String
CONDITIONAL
The payer's last or surname.
Data can consist of any characters
String
CONDITIONAL
The contact person's mobile phone or cell phone number.
Data can consist of any characters
String
CONDITIONAL
The phone number of the person to whom the order is being billed.
Data can consist of any characters
String
CONDITIONAL
The tax registration identifier of the customer.
Data can consist of any characters
Information about the device used by the payer for this transaction.
String
CONDITIONAL
The telephone number captured by ANI (Automatic Number Identification) when the customer calls to place the order.
Data can consist of any characters
String
CONDITIONAL
The 2 digit ANI information identifier provided by the telephone company to indicate the call type, for example, cellular (61-63), toll free (24,25), etc.
Data can consist of any characters
String
CONDITIONAL
The User-Agent header of the browser the customer used to place the order.For example, MOZILLA/4.0 (COMPATIBLE; MSIE 5.0; WINDOWS 95)
You must provide a value in this field if you are performing 3-D Secure authentication of the payer and set authentication.channel = PAYER_BROWSER.
Data can consist of any characters
String
CONDITIONAL
The name of the server to which the customer is connected.
Data can consist of any characters
String
CONDITIONAL
The IP address of the device used by the payer, in nnn.nnn.nnn.nnn format.
Data can consist of any characters
String
CONDITIONAL
The mobile phone manufacturer's identifier for the model of the mobile device used to initiate the payment.
Data can consist of any characters
This group is an encrypted JSON object containing authentication data obtained during the authentication process.
You can ignore this group if you are making a subsequent payment or Verify operation with the gateway, instead just rely on the response.gatewayRecommendation field.
However this group is applicable if:
- you want to use 3-D Secure authentication data obtained to process the payment via another channel
- you want to interpret some details of the 3-D Secure authentication response.
The decryption will yield a JSON object which will contain a subset of the following fields.
- authentication.3ds.authenticationToken
- authentication.3ds.acsEci
- authentication.3ds.transactionId
- authentication.3ds2.statusReasonCode
- authentication.3ds2.transactionStatus
- authentication.3ds2.dsTransactionId
- authentication.3ds1.veResEnrolled
- authentication.3ds1.paResStatus
- sourceOfFunds.provided.card.expiry.month
- sourceOfFunds.provided.card.expiry.year
- sourceOfFunds.provided.card.number
- sourceOfFunds.token
- order.id
- transaction.authenticationStatus
- transaction.id
String
ALWAYS PROVIDED
Base64 encoded ciphertext.
Data can consist of any characters
String
ALWAYS PROVIDED
Base64 encoded GCM nonce.
Data can consist of any characters
String
ALWAYS PROVIDED
Base64 encoded GCM tag.
Data can consist of any characters
String
CONDITIONAL
Your payment service provider might have configured your merchant profile to support several lines of business.
Each line of business can have different payment parameters, such as bank account, supported cards or such.
For example, lineOfBusiness = TICKET_SALES can have a different bank account from lineOfBusiness = MERCHANDISING. One line of business on your profile might be "null". To use that, do not provide the lineOfBusiness field.
Data can consist of any characters except space
Alphanumeric + additional characters
ALWAYS PROVIDED
The unique identifier issued to you by your payment provider.
This identifier can be up to 12 characters in length.
Data may consist of the characters 0-9, a-z, A-Z, '-', '_'
Information about the order associated with this transaction.
Decimal
ALWAYS PROVIDED
The total amount for the order. This is the net amount plus any merchant charge amounts.If you provide any sub-total amounts, then the sum of these amounts (order.itemAmount, order.taxAmount, order.shippingAndHandlingAmount, order.cashbackAmount, order.gratuityAmount, order.merchantCharge.amount and order.dutyAmount), minus the order.discountAmount must equal the net amount.
The value of this field in the response is zero if payer funds are not transferred.
Data is a decimal number.
Enumeration
CONDITIONAL
Indicates the result of payer authentication.
Value must be a member of the following list. The values are case sensitive.
AUTHENTICATION_ATTEMPTED
Payer authentication was attempted and a proof of authentication attempt was obtained.
AUTHENTICATION_AVAILABLE
Payer authentication is available for the payment method provided.
AUTHENTICATION_EXEMPT
Exemption from the Regulatory Technical Standards (RTS) requirements for Strong Customer Authentication (SCA) under the Payment Services Directive 2 (PSD2) regulations in the European Economic Area has been claimed or granted.
AUTHENTICATION_FAILED
The payer was not authenticated. You should not proceed with this transaction.
AUTHENTICATION_NOT_IN_EFFECT
There is no authentication information associated with this transaction.
AUTHENTICATION_NOT_SUPPORTED
The requested authentication method is not supported for this payment method.
AUTHENTICATION_PENDING
Payer authentication is pending completion of a challenge process.
AUTHENTICATION_REJECTED
The issuer rejected the authentication request and requested that you do not attempt authorization of a payment.
AUTHENTICATION_REQUIRED
Payer authentication is required for this payment, but was not provided.
AUTHENTICATION_SUCCESSFUL
The payer was successfully authenticated.
AUTHENTICATION_UNAVAILABLE
The payer was not able to be authenticated due to a technical or other issue.
Enumeration
CONDITIONAL
Indicates if you expect to capture the full order amount for which you are requesting authorization.
If you do not provide a value for order.certainty the default configured for you by your payment service provider will be used. The value provided in the response shows the value the gateway sent to the acquirer
Value must be a member of the following list. The values are case sensitive.
ESTIMATED
The amount authorized is an estimate of the amount that will be captured. It is possible that the amount captured will be less, or might not be captured at all.
FINAL
The full authorized amount is expected to be captured within the mandated time. The order will only be cancelled in exceptional circumstances (for example, the payer cancelled their purchase).
DateTime
ALWAYS PROVIDED
Indicates the date and time the gateway considers the order to have been created.
An instant in time expressed in ISO8601 date + time format - "YYYY-MM-DDThh:mm:ss.SSSZ"
Upper case alphabetic text
ALWAYS PROVIDED
The currency of the order expressed as an ISO 4217 alpha code, e.g. USD.
Data must consist of the characters A-Z
String
CONDITIONAL
A field you provide to capture additional information about this order that is only of interest to you.
The gateway does not send this information to the acquirer. A maximum of 50 such fields may be added to the order.
Data can consist of any characters
String
CONDITIONAL
A note from the payer about this order.
Data can consist of any characters
Date
CONDITIONAL
The date the payer placed the order.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd.
ASCII Text
CONDITIONAL
The payer's own reference for the order.
This reference may assist the payer to identify the order in their system. For example, a purchase order number, project identifier, or cost center.
Data consists of ASCII characters
String
CONDITIONAL
Short textual description of the contents of the order.
Data can consist of any characters
Information about a price reduction you have applied to the order.
For example, you may apply discounts for trade, employees, bulk purchase, or a sales promotion.
Decimal
CONDITIONAL
The total amount of the discount you have applied to the order.
Data is a decimal number.
String
CONDITIONAL
The code you use to identify the reason for the discount.
Data can consist of any characters
String
CONDITIONAL
A description of your reason for the discount.
Data can consist of any characters
Decimal
CONDITIONAL
The duty amount (also known as customs tax, tariff or dues) for the order.
Data is a decimal number.
String
ALWAYS PROVIDED
A unique identifier for this order to distinguish it from any other order you create.
Use this identifier when referring to this order in subsequent transactions and in retrieval operations. This value must be unique for every order created by your merchant profile.
Data can consist of any characters
String
CONDITIONAL
The invoice number you issued for this order.
Data can consist of any characters
Decimal
CONDITIONAL
The total item amount for the order.
Data is a decimal number.
DateTime
ALWAYS PROVIDED
Indicates the date and time the gateway considers the order to have last been updated.
An instant in time expressed in ISO8601 date + time format - "YYYY-MM-DDThh:mm:ss.SSSZ"
String
CONDITIONAL
Your tax registration identifier provided by the Local/State/Province tax authority.
If you are a Canadian merchant, use this field to provide your Tax Registration ID for paying Provincial Sales Tax (PST).
Data can consist of any characters
Use this parameter group to provide additional information if you are a marketplace.You are considered a marketplace if you operate an electronic commerce website or mobile application that brings together payers and retailers and you are selling the goods or services on behalf of the retailer.In this case, the card schemes may require you to register with them as a marketplace and assign you a Marketplace ID.
You should provide this identifier to your payment service provider so that the gateway can automatically include it in all transaction messages to your acquirer.
Enumeration
CONDITIONAL
Provide information about the location of the retailers for goods or services included in this order.Where a retailer is located in a country different from your country, they are considered a foreign retailer, otherwise they are considered a domestic retailer.
Value must be a member of the following list. The values are case sensitive.
DOMESTIC_ONLY
The order only contains items from domestic retailers.
FOREIGN_AND_DOMESTIC
The order contains items from both foreign and domestic retailers.
FOREIGN_ONLY
The order only contains items from foreign retailers.
Digits
CONDITIONAL
A 4-digit code used to classify your business by the type of goods or services it offers.This is also known as the Merchant Category Code (MCC).
You only need to provide the MCC if you want to override the default value configured for your acquirer link.The value you provide must match one of those configured by your payment service provider.
Data is a string that consists of the characters 0-9.
Information about additional fees that you are charging the payer for processing the payment for this order, for example, a surcharge.
Decimal
ALWAYS PROVIDED
The amount of the additional fee that you are charging the payer.
If you provide a charge amount, you must include it in the total amount for the order.
Data is a decimal number.
Enumeration
ALWAYS PROVIDED
Indicates who calculated the charge amount.
Value must be a member of the following list. The values are case sensitive.
CLIENT
The charge amount was included in the transaction request.
GATEWAY
The gateway calculated the charge amount based on the net amount included in the transaction request and the configured charge rules.
String
CONDITIONAL
Where the gateway has generated the charge amount based on the configured charge rules, this field contains the name of the rule.
Data can consist of any characters
Enumeration
ALWAYS PROVIDED
The type of the additional fee that you are charging the payer.
Value must be a member of the following list. The values are case sensitive.
SURCHARGE
A fee that covers your cost of accepting accepting a payment method.
Decimal
CONDITIONAL
The amount payable for the order before merchant charge amount is applied.
If you specify a net amount the gateway will calculate the merchant charge amount for you based on the charge type (order.merchantCharge.type) provided in the request. Alternatively, you can specify the merchant charge amount (order.merchantCharge.amount) yourself.
Data is a decimal number.
Url
CONDITIONAL
The URL to which the gateway will send Webhook notifications when an order is created or updated.
To receive notifications at this URL, you must enable Webhook notifications in Merchant Administration. Ensure the URL is HTTPS
Ensure that the URL begins with 'https' and is longer than 11 characters.
String
CONDITIONAL
Your identifier for the part of your organization that is responsible for the order.
You might provide this data when you want to track the accountability for the order. For example, store number, sales region, branch, or profit center
Data can consist of any characters
String
CONDITIONAL
An optional identifier for the order.
For example, a shopping cart number, an order number, or an invoice number.
Data can consist of any characters
String
CONDITIONAL
The name of the person who requested the goods or services.
Data can consist of any characters
Decimal
CONDITIONAL
The total shipping and handling amount for the order, including taxes on the shipping and/or handling.
Data is a decimal number.
Decimal
CONDITIONAL
The tax amount levied on the shipping and handling amount for the order.
This amount is included in the shipping and handling amount provided in field order.shippingAndHandlingAmount.
Data is a decimal number.
Decimal
CONDITIONAL
The tax rate applied to the shipping and handling amount for the order to determine the shipping and handling tax amount.
For a tax rate of 2.5% provide 0.025.
Data is a decimal number.
Contact information provided by you for printing on payer's account statements.
Descriptor address of the merchant.
String
CONDITIONAL
The city portion of the address.
Data can consist of any characters
String
CONDITIONAL
The name of the company associated with this address.
Data can consist of any characters
Upper case alphabetic text
CONDITIONAL
The 3 letter ISO standard alpha country code of the address.
Data must consist of the characters A-Z
Alphanumeric + additional characters
CONDITIONAL
The post code or zip code of the address.
Data may consist of the characters 0-9, a-z, A-Z, ' ', '-'
String
CONDITIONAL
The state or province of the address.
Data can consist of any characters
String
CONDITIONAL
The first line of the address.
For example, this may be the street name and number, or the Post Office Box details.
Data can consist of any characters
String
CONDITIONAL
The second line of the address (if provided).
Data can consist of any characters
String
CONDITIONAL
Descriptor name of the merchant.
Data can consist of any characters
String
CONDITIONAL
Descriptor phone number of the merchant's business.
Data can consist of any characters
Enumeration
CONDITIONAL
The current progression of this order through the payment process.
Value must be a member of the following list. The values are case sensitive.
AUTHENTICATED
The payer was successfully authenticated.
AUTHENTICATION_INITIATED
Payer authentication has been initiated but not completed.
AUTHENTICATION_NOT_NEEDED
Payer authentication was not performed as it was not needed.
AUTHENTICATION_UNSUCCESSFUL
Payer authentication was not able to be successfully completed.
AUTHORIZED
The payment has been authorized successfully but the authorized amount has not yet been captured, in part, full, or excess.
CANCELLED
The initial transaction for this order has been voided successfully.
CAPTURED
The authorized amount for this order, in full or excess, has been captured successfully.
CHARGEBACK_PROCESSED
A Chargeback has been processed against this order.
DISBURSED
The order amount has successfully been disbursed to the payer.
DISPUTED
The payment has been disputed and is under investigation. A request for information has been received or a chargeback is pending.
EXCESSIVELY_REFUNDED
The payment has been captured in part, full, or excess, but the captured amount in excess has been refunded successfully.
FAILED
The payment has not been successful.
FUNDING
The order transfers money to or from the merchant, without the involvement of a payer. For example, recording monthly merchant service fees from your payment service provider.
INITIATED
A browser payment that has successfully been initiated for this order. No payment has yet been made.
PARTIALLY_CAPTURED
The authorized amount for this order, in part, has been captured successfully.
PARTIALLY_REFUNDED
The payment has been captured in part, full, or excess, but the captured amount in part has been refunded successfully.
REFUNDED
The payment has been captured in part, full, or excess, but the captured amount in full has been refunded successfully.
REFUND_REQUESTED
A refund against captured amounts on this order has been requested but not executed. Requires further action to approve the refund.
VERIFIED
The card details for this order have successfully been verified. No payment has yet been initiated or made.
Information about orders for items not yet available (pre-order) or for items previously purchased (reorder).
Boolean
CONDITIONAL
Indicates that the purchase includes merchandise with a future availability or release date.
JSON boolean values 'true' or 'false'.
Date
CONDITIONAL
The date that preordered items are expected to be available.
Provide this field if the payer is ordering items before you have them available for purchase.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
Boolean
CONDITIONAL
Indicates that the purchase includes merchandise that the payer has previously ordered.
JSON boolean values 'true' or 'false'.
Decimal
CONDITIONAL
A fee charged by you to cover the cost of accepting a payment method.
This is an additional amount charged by you for accepting one payment method (e.g. a credit card) instead of another (e.g. cash).
If you provide a surcharge amount, you should include it in the total amount for the order.
Data is a decimal number.
Enumeration
CONDITIONAL
Indicates how the surcharge amount was determined for an order.
Value must be a member of the following list. The values are case sensitive.
CLIENT
The surcharge amount was provided by the merchant.
GATEWAY
The surcharge amount was calculated by the gateway based on surcharging rules configured by the merchant.
Use this parameter group to provide a breakdown of tax types, amount per tax type, and rate per tax type included in order.taxAmount.
Decimal
CONDITIONAL
The tax amount included in this order for the tax type.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Decimal
CONDITIONAL
The tax rate (percentage) used to determine the tax amount included in this order for the tax type.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
String
CONDITIONAL
The type of tax included in the order amount.
The correct value as used by your acquirer may have to be provided. Contact your payment service provider for details.
Data can consist of any characters
Decimal
CONDITIONAL
The total tax amount for the order.
Data is a decimal number.
String
CONDITIONAL
Your tax registration identifier provided by the Federal/National tax authority (for example, federal tax identification number, ABN).
If you are a Canadian merchant, use this field to provide your Tax Registration ID for paying Harmonized Sales Tax (HST) or Goods and Services Tax (GST) collected by the Canada Revenue Agency.
Data can consist of any characters
String
CONDITIONAL
Indicates your tax status for this order.
Data can consist of any characters
Decimal
ALWAYS PROVIDED
The amount that has been successfully authorized for this order.
Data is a decimal number.
Decimal
ALWAYS PROVIDED
The amount that has been successfully captured for this order.
Data is a decimal number.
Decimal
ALWAYS PROVIDED
The amount that has been successfully refunded for this order.
Data is a decimal number.
Information relevant for Transaction Filtering.
Allows you to provide the Address Verification Service (AVS) Response Code Transaction Filtering rules to be applied to the transactions for this order.
If provided, these rules override the AVS Response Code Transaction Filtering rules you have configured in Merchant Administration.
Enumeration
ALWAYS PROVIDED
The action to be performed for the Address Verification Service (AVS) Response Code.
Value must be a member of the following list. The values are case sensitive.
NO_ACTION
No action should be taken by the gateway.
REJECT
The gateway must reject the transaction.
REVIEW
The gateway must mark this transaction as requiring a review.
Enumeration
ALWAYS PROVIDED
The Address Verification Service (AVS) Response Code for which you are defining the rule.
Value must be a member of the following list. The values are case sensitive.
ADDRESS_MATCH
Street address matched
ADDRESS_ZIP_MATCH
Street address and zip/postcode were matched
NAME_ADDRESS_MATCH
Card holder name and street address matched
NAME_MATCH
Card holder name matched
NAME_ZIP_MATCH
Card holder name and zip/postcode matched
NOT_AVAILABLE
No data available from issuer or AVS data not supported for transaction
NOT_REQUESTED
AVS not requested
NOT_VERIFIED
AVS could not be verified for an international transaction
NO_MATCH
No match
SERVICE_NOT_AVAILABLE_RETRY
Issuer system is unavailable. Retry can be attempted
SERVICE_NOT_SUPPORTED
Service currently not supported by acquirer or merchant
ZIP_MATCH
Zip/postcode matched. Street address not matched
Information about payments that transfer money to another store of value, such as a gift card or gaming chips.
Enumeration
CONDITIONAL
The type of value store to which money is being transferred.
The default value is NOT_A_TRANSFER.
Value must be a member of the following list. The values are case sensitive.
ACCOUNT_FUNDING
Payment to add funds to the payer's account with the merchant. These funds can be used for future purchases.
NOT_A_TRANSFER
This payment is not for the purpose of transferring money to another store of value. It is a payment for goods or services.
PREPAID_LOAD
Payment to add funds to a prepaid card or gift card.
QUASI_CASH_TRANSACTION
Payment for items that are directly convertible to cash. For example, money orders, casino gaming chips, or traveller's checks.
Decimal
CONDITIONAL
The amount of money being transferred, in units of order.valueTransfer.currency.
The default value is order.amount
Data is a decimal number.
Upper case alphabetic text
CONDITIONAL
The currency of the store.
If the money is being transferred to multiple currencies, then use the currency of the highest transferred value.
The default value is order.currency.
Data must consist of the characters A-Z
Integer
CONDITIONAL
The number of prepaid or gift card being purchased.
The default value is one when you set order.valueTransfer.accountType = PREPAID_LOAD. For all other values of order.valueTransfer.accountType the default is zero.
JSON number data type, restricted to being positive or zero. In addition, the represented number may have no fractional part.
String
CONDITIONAL
If, when integrating with the gateway, you are using a solution (e.g. a shopping cart or e-commerce solution) provided, supported or certified by your payment service provider, enter the solution ID issued by your payment service provider here.
If your payment service provider has not provided you with a solution ID, you should ignore this field.
Data can consist of any characters
String
CONDITIONAL
The container for additional information about a transaction.
Only returned for some errors and is dependent on the merchant's configuration. Returned in error, declined and approved scenarios, but would only be used to trouble shoot issues.
Data can consist of any characters
Enumeration
ALWAYS PROVIDED
Summary of the success or otherwise of the operation.
Value must be a member of the following list. The values are case sensitive.
ABORTED
Transaction aborted by payer
ACQUIRER_SYSTEM_ERROR
Acquirer system error occurred processing the transaction
APPROVED
Transaction Approved
APPROVED_AUTO
The transaction was automatically approved by the gateway. it was not submitted to the acquirer.
APPROVED_PENDING_SETTLEMENT
Transaction Approved - pending batch settlement
AUTHENTICATION_FAILED
Payer authentication failed
AUTHENTICATION_IN_PROGRESS
The operation determined that payer authentication is possible for the given card, but this has not been completed, and requires further action by the merchant to proceed.
BALANCE_AVAILABLE
A balance amount is available for the card, and the payer can redeem points.
BALANCE_UNKNOWN
A balance amount might be available for the card. Points redemption should be offered to the payer.
BLOCKED
Transaction blocked due to Risk or 3D Secure blocking rules
CANCELLED
Transaction cancelled by payer
DECLINED
The requested operation was not successful. For example, a payment was declined by issuer or payer authentication was not able to be successfully completed.
DECLINED_AVS
Transaction declined due to address verification
DECLINED_AVS_CSC
Transaction declined due to address verification and card security code
DECLINED_CSC
Transaction declined due to card security code
DECLINED_DO_NOT_CONTACT
Transaction declined - do not contact issuer
DECLINED_INVALID_PIN
Transaction declined due to invalid PIN
DECLINED_PAYMENT_PLAN
Transaction declined due to payment plan
DECLINED_PIN_REQUIRED
Transaction declined due to PIN required
DEFERRED_TRANSACTION_RECEIVED
Deferred transaction received and awaiting processing
DUPLICATE_BATCH
Transaction declined due to duplicate batch
EXCEEDED_RETRY_LIMIT
Transaction retry limit exceeded
EXPIRED_CARD
Transaction declined due to expired card
INSUFFICIENT_FUNDS
Transaction declined due to insufficient funds
INVALID_CSC
Invalid card security code
LOCK_FAILURE
Order locked - another transaction is in progress for this order
NOT_ENROLLED_3D_SECURE
Card holder is not enrolled in 3D Secure
NOT_SUPPORTED
Transaction type not supported
NO_BALANCE
A balance amount is not available for the card. The payer cannot redeem points.
PARTIALLY_APPROVED
The transaction was approved for a lesser amount than requested. The approved amount is returned in order.totalAuthorizedAmount.
PENDING
Transaction is pending
REFERRED
Transaction declined - refer to issuer
SUBMITTED
The transaction has successfully been created in the gateway. It is either awaiting submission to the acquirer or has been submitted to the acquirer but the gateway has not yet received a response about the success or otherwise of the payment.
SYSTEM_ERROR
Internal system error occurred processing the transaction
TIMED_OUT
The gateway has timed out the request to the acquirer because it did not receive a response. Points redemption should not be offered to the payer.
UNKNOWN
The transaction has been submitted to the acquirer but the gateway was not able to find out about the success or otherwise of the payment. If the gateway subsequently finds out about the success of the payment it will update the response code.
UNSPECIFIED_FAILURE
Transaction could not be processed
Enumeration
CONDITIONAL
If a payment fails, this indicates how you could change the request to bring about success.
This field is only present if your gateway configuration supports optional payment features.
Value must be a member of the following list. The values are case sensitive.
DO_NOT_PROCEED
Do not proceed using this card. This will be presented if the gateway fails the request, but there is no apparent way for this transaction to succeed.
PROCEED
Proceed with the next step in processing this payment by either: Authenticating the payer using the Authenticate Payer operation or Submitting the payment request as the payer is sufficiently authenticated, or updating card details.
Enumeration
ALWAYS PROVIDED
A system-generated high level overall result of the operation.
Value must be a member of the following list. The values are case sensitive.
FAILURE
The operation was declined or rejected by the gateway, acquirer or issuer
PENDING
The operation is currently in progress or pending processing
SUCCESS
The operation was successfully processed
UNKNOWN
The result of the operation is unknown
Shipping information for this order.
The address to which the goods contained in this order are being shipped.
This data may be used to qualify for better interchange rates on corporate purchase card transactions.
String
CONDITIONAL
The city portion of the address.
Data can consist of any characters
String
CONDITIONAL
The name of the company associated with this address.
Data can consist of any characters
Upper case alphabetic text
CONDITIONAL
The 3 letter ISO standard alpha country code of the address.
Data must consist of the characters A-Z
Alphanumeric + additional characters
CONDITIONAL
The post code or zip code of the address.
Data may consist of the characters 0-9, a-z, A-Z, ' ', '-'
Enumeration
CONDITIONAL
How you obtained the shipping address.
Value must be a member of the following list. The values are case sensitive.
ADDRESS_ON_FILE
Order shipped to an address that you have on file.
NEW_ADDRESS
Order shipped to an address provided by the payer for this transaction.
String
CONDITIONAL
The state or province of the address.
Data can consist of any characters
String
CONDITIONAL
The three character ISO 3166-2 country subdivision code for the state or province of the address.
Providing this field might improve your payer experience for 3-D Secure payer authentication.
Data can consist of any characters
String
CONDITIONAL
The first line of the address.
For example, this may be the street name and number, or the Post Office Box details.
Data can consist of any characters
String
CONDITIONAL
The second line of the address (if provided).
Data can consist of any characters
Enumeration
CONDITIONAL
Indicates whether the shipping address provided is the same as the payer's billing address.
Provide this value if you are not providing the full shipping and billing addresses, but you can affirm that they are the same or different.
The default value for this field is:
SAME - if the shipping and billing address are supplied, and all fields are the same (ignoring non-alphanumerics).
DIFFERENT - if the shipping and billing address are supplied, and at least one field is different (ignoring non-alphanumerics).
UNKNOWN - either shipping address or billing address is absent.
Value must be a member of the following list. The values are case sensitive.
DIFFERENT
The shipping and billing addresses are different.
SAME
The shipping and billing addresses are the same.
UNKNOWN
It is not known if the shipping and billing addresses are the same.
Details of the contact person at the address the goods will be shipped to.
Email
CONDITIONAL
The contact person's email address.
The field format restriction ensures that the email address is longer than 3 characters and adheres to a generous subset of valid RFC 2822 email addresses.
Ensures that the email address is longer than 3 characters and adheres to a generous subset of valid RFC 2822 email addresses
String
CONDITIONAL
The first name of the person to whom the order is being shipped.
Data can consist of any characters
String
CONDITIONAL
The last name or surname of the person to whom the order is being shipped.
Data can consist of any characters
Telephone Number
CONDITIONAL
The contact person's mobile phone or cell phone number in ITU-T E123 format, for example +1 607 1234 5678
The number consists of:
- '+'
- country code (1, 2 or 3 digits)
- 'space'
- national number ( which may embed single spaces characters for readability).
Data consists of '+', country code (1, 2 or 3 digits), 'space', and national number (which may embed single space characters for readability)
Telephone Number
CONDITIONAL
The contact person's phone number in ITU-T E123 format, for example +1 607 1234 456
The number consists of:
- '+'
- country code (1, 2 or 3 digits)
- 'space'
- national number ( which may embed single spaces characters for readability).
Data consists of '+', country code (1, 2 or 3 digits), 'space', and national number (which may embed single space characters for readability)
Enumeration
CONDITIONAL
Indicates whether the supplied name for the recipient of shipping matches the cardholder name.
Provide this value if you are not providing the full name or cardholder name, but you can affirm that they are the same or different.
Default value is UNKNOWN
Value must be a member of the following list. The values are case sensitive.
DIFFERENT
The shipping and billing addresses are different.
SAME
The shipping and billing addresses are the same.
UNKNOWN
It is not known if the shipping and billing addresses are the same.
Enumeration
CONDITIONAL
The shipping method used for delivery of this order
Value must be a member of the following list. The values are case sensitive.
ELECTRONIC
Electronic delivery.
GROUND
Ground (4 or more days).
NOT_SHIPPED
Order for goods that are not shipped (for example, travel and event tickets)
OVERNIGHT
Overnight (next day).
PICKUP
Shipped to a local store for pick up.
PRIORITY
Priority (2-3 days).
SAME_DAY
Same day.
Alphanumeric + additional characters
CONDITIONAL
The post code or zip code of the address the order is shipped from.
Data may consist of the characters 0-9, a-z, A-Z, ' ', '-'
Information about the payment type selected by the payer for this payment and the source of the funds.
Depending on the payment type the source of the funds can be a debit or credit card, bank account, or account with a browser payment provider (such as PayPal).
For card payments the source of funds information may be represented by combining one or more of the following: explicitly provided card details, a session identifier which the gateway will use to look up the card details and/or a card token. Precedence rules will be applied in that explicitly provided card details will override session card details which will override card token details. Each of these may represent partial card details, however the combination must result in a full and complete set of card details. See Using Multiple Sources of Card Details for examples.
Information about the source of funds when it is directly provided (as opposed to via a token or session).
For browser payments, the source of funds details are usually collected from the payer on the payment provider's website and provided to you when you retrieve the transaction details (for a successful transaction). However, for some payment types (such as giropay), you must collect the information from the payer and supply it here.
For ACH payments, the details about the payers bank account used for the payment as well as the type of ACH payment are provided in this parameter group.
Enumeration
CONDITIONAL
An indicator identifying the type of bank account.
- Consumer (checking or savings), or
- Business
For pre-arranged payments (sourceOfFunds.provided.ach.secCode=PPD) retrieve this information from the payer.
If payments were telephone-initiated (sourceOfFunds.provided.ach.secCode=TEL) or internet-initiated (sourceOfFunds.provided.ach.secCode=WEB) you may choose to limit the payer's options (e.g. only support consumer checking accounts), depending on your type of business (e.g. B2C online webshop).
Value must be a member of the following list. The values are case sensitive.
CONSUMER_CHECKING
Consumer Checking Account
CONSUMER_SAVINGS
Consumer Savings Account
CORPORATE_CHECKING
Business Checking Account
String
CONDITIONAL
The name of the bank account holder, as it appears on the account at the receiving financial institution.
Retrieve this information from the payer.
Data can consist of any characters
Alphanumeric + additional characters
CONDITIONAL
The identifier of the bank account at the receiving financial institution.
By default, the bank account number will be returned in a masked format, for example, xxxxxx0000. If you wish to return unmasked bank account numbers, you must have the requisite permission, set responseControls.sensitiveData, and authenticate your call to the API using certificate authentication. Contact your payment service provider for further information.
Data may consist of the characters 0-9, a-z, A-Z, ' ', '-', '/'
Digits
CONDITIONAL
The identifier of the receiving financial institution.
Also known as:
- Routing number,
- Transit number, or
- ABA number
Retrieve this information from the payer.
See also http://en.wikipedia.org/wiki/Routing_transit_number.
Data is a string that consists of the characters 0-9.
Enumeration
CONDITIONAL
Identifies the Standard Entry Class (SEC) code to be sent to the issuer.
The SEC is defined by NACHA and describes the origin and intent of the payment. For details please refer to https://www.nacha.org/.
Value must be a member of the following list. The values are case sensitive.
PPD
An ACH debit or credit payment (B2C) that has been authorized by an authenticated customer in written form (signed or similarly authenticated). PPD is used for pre-arranged payments (e.g. employee payroll, mortgage payments, expense reimbursement).
TEL
An ACH debit payment (B2C) that has been authorized by an authenticated customer via phone. TEL may only be used if a relationship already exists between you and the consumer, or, the consumer initiates the contact with you.
WEB
An ACH debit payment (B2C) that has been authorized by an authenticated customer via the internet or a wireless network.
Additional details related to a Bancontact payment.
String
ALWAYS PROVIDED
The name of the bank account holder for the payer's bank account.
Data can consist of any characters
Additional details related to a BLIK browser payment.
String
ALWAYS PROVIDED
The name of the bank account holder for the payer's bank account.
Data can consist of any characters
Additional details related to a Boleto Bancario browser payment.
When processing a Boleto Bancario payment you must also provide the payer's national identifier (customer.nationalId), your reference to the payer (customer.id) and the payer's date of birth (customer.dateOfBirth)
Enumeration
CONDITIONAL
The action to take if the payment is not honored.
Value must be a member of the following list. The values are case sensitive.
WRITE_OFF
Write off the Boleto.
String
ALWAYS PROVIDED
The name of the bank account holder for the payer's bank account.
Data can consist of any characters
Enumeration
CONDITIONAL
Type of the Customer i.e. Individual or Company.
If the value is not provided it will be defaulted to INDIVIDUAL.
Value must be a member of the following list. The values are case sensitive.
COMPANY
Customer is an organization.
INDIVIDUAL
Customer is an individual.
Digits
CONDITIONAL
Number of days granted by you to the customer after the due date of Boleto payment before the specified action is taken.
Data is a string that consists of the characters 0-9.
Date
CONDITIONAL
The date by which the Boleto amount needs to be paid.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
Url
CONDITIONAL
The URL issued by the gateway which you must use to retrieve collection bank slip.
Ensure that the URL begins with 'https' and is longer than 11 characters.
Details about the card.
Use this parameter group when you have sourced payment details using:
Cards: the card details entered directly or collected using a Point of Sale (POS) terminal.
Device payment methods such as Apple Pay, Android Pay, Samsung Pay or Google Pay.
Digital wallets such as Masterpass, Visa Checkout or Amex Express Checkout.
Card scheme tokens where the card was tokenized using a card scheme tokenization service such as Mastercard Digital Enablement Service (MDES).
Enumeration
CONDITIONAL
You can provide this field for card types that have a savings/checking option, such as Maestro cards.
If you do not provide a value, we will use the acquirer's default. You can use paymentTypes.card.cardTypes in the 'Retrieve Payment Options' operation response to determine the card type.
Value must be a member of the following list. The values are case sensitive.
CHECKING
SAVINGS
Enumeration
ALWAYS PROVIDED
The brand name used to describe the card that is recognized and accepted globally.
For many major card types this will match the scheme name. In some markets, a card may also be co-branded with a local brand that is recognized and accepted within its country/region of origin (see card.localBrand).
You may use this information to support surcharging decisions. This information is gathered from 3rd party sources and may not be accurate in all circumstances.
Value must be a member of the following list. The values are case sensitive.
AMEX
American Express
CHINA_UNIONPAY
China UnionPay
DINERS_CLUB
Diners Club
DISCOVER
Discover
JCB
JCB (Japan Credit Bureau)
LOCAL_BRAND_ONLY
The card does not have a global brand.
MAESTRO
Maestro
MASTERCARD
MasterCard
RUPAY
RuPay
UATP
UATP (Universal Air Travel Plan)
UNKNOWN
The brand of the card used in the transaction could not be identified
VISA
Visa
Use this parameter group if the payer used a device payment technology (eg ApplePay).
You can either just present the device's payment token in the paymentToken subfield, or decrypt the payment token yourself and pass the components in the 3dSecure subfields.
Enumeration
CONDITIONAL
The format of the cryptogram provided for the device payment.
You must provide the cryptogram format when you decrypt the payment token and provide the payment details (including the online payment cryptogram) in the transaction request.
You do not need to provide the cryptogram format if you provide the payment token in sourceOfFunds.provided.card.devicePayment.paymentToken
Value must be a member of the following list. The values are case sensitive.
3DSECURE
The payment data keys for the online payment cryptogram are provided using the 3-D Secure format.
EMV
The payment data keys for the online payment cryptogram are provided using the EMV format.
The expiry date of the account number associated with a digital payment method.
The associated account number is returned in sourceOfFunds.provided.card.deviceSpecificNumber. This field is returned for:
- • Device payments: the expiry date for the Device Primary Account Number (DPAN).
- • Digital wallets: the expiry date for the Token PAN.
- • Card scheme tokens: the expiry date for the Token PAN.
Digits
ALWAYS PROVIDED
Month from the expiry date of the device specific account number.
Months are numbered January=1, through to December=12.
Data is a number between 1 and 12 represented as a string.
Digits
ALWAYS PROVIDED
Year from the expiry date of the device specific account number.
The Common Era year is 2000 plus this value.
Data is a string that consists of the characters 0-9.
Masked digits
ALWAYS PROVIDED
The payer's account number associated with a digital payment method.
Use this field for:
- • Device payments: the payers's account number associated with the mobile device used for the payment. This is also known as the Device Primary Account Number (DPAN).
- • Digital wallets: the Token PAN returned by a digital wallet. The gateway only returns this value for Amex Express Checkout.
- • Card scheme tokens: the token generated by a card scheme tokenization service such as Mastercard Digital Enablement Service (MDES). The token is used as an identifier of the payer's Primary Account Number (PAN) securely stored by the service. For MDES, this token is referred to as the Token PAN. For VTS, this is the Token
Data is a string that consists of the characters 0-9, plus 'x' for masking
String
CONDITIONAL
This field only applies to transactions that originate from an EMV capable terminal.
It contains the EMV fields returned from the issuer in response to an authorization request for the chip transaction when the transaction was sent online.
The card/terminal uses data returned from the issuer to make the final decision to accept or decline the transaction.
Data can consist of any characters
Enumeration
CONDITIONAL
The encryption framework used for the payment details received by the gateway.
Value must be a member of the following list. The values are case sensitive.
DEVICE
Encrypted by a payer's device (such as a mobile phone).
DIGITAL_WALLET
Encrypted by a payer's digital wallet.
DUKPT
Encrypted by a payment terminal using Derived Unique Key Per Transaction (DUKPT).
Expiry date, as shown on the card.
This field corresponds to EMV tag 5F24
Digits
ALWAYS PROVIDED
Month, as shown on the card.
If using a scheme token this is the token expiry month.
Months are numbered January=1, through to December=12.
Data is a number between 1 and 12 represented as a string.
Digits
ALWAYS PROVIDED
Year, as shown on the card.
If using a scheme token this is the token expiry year.
The Common Era year is 2000 plus this value.
Data is a string that consists of the characters 0-9.
Enumeration
ALWAYS PROVIDED
The method used by the payer to provide the funds for the payment.
You may use this information to support surcharging decisions. This information is gathered from 3rd party sources and may not be accurate in all circumstances.
Value must be a member of the following list. The values are case sensitive.
CHARGE
The payer has a line of credit with the issuer which must be paid off monthly.
CREDIT
The payer has a revolving line of credit with the issuer.
DEBIT
Funds are immediately debited from the payer's account with the issuer.
UNKNOWN
The account funding method could not be determined.
String
CONDITIONAL
The issuer of the card, if known.
WARNING: This information may be incorrect or incomplete – use at your own risk.
Data can consist of any characters
String
CONDITIONAL
The brand name used to describe a card that is recognized and accepted within its country/region of origin.
The card may also be co-branded with a brand name that is recognized and accepted globally (see card.brand).
You may use this information to support surcharging decisions. This information is gathered from 3rd party sources and may not be accurate in all circumstances.
Data can consist of any characters
String
CONDITIONAL
The cardholder's name as printed on the card.
Data can consist of any characters
Masked digits
ALWAYS PROVIDED
The account number of the payer's account used for this authentication.
On requests, provide the number in the form that you receive it (as explained below). On responses, the gateway populates it with a form that the payer would recognize (also explained in more detail below).
- Request
On request, populate this field based on the payment method you are using for the payment:- • Card: the account number embossed onto the card.
- • Scheme tokens such as MDES (Mastercard Digital Enablement Service) - supply the value called the "Token PAN" or VTS (Visa Token Service) - supply the value called "token".
- Response
On return, the card number will be populated in 6.4 masking format, for example, 000000xxxxxx0000.
Data is a string that consists of the characters 0-9, plus 'x' for masking
Enumeration
ALWAYS PROVIDED
The organization that owns a card brand and defines operating regulations for its use.
The card scheme also controls authorization and settlement of card transactions among issuers and acquirers.
Value must be a member of the following list. The values are case sensitive.
AMEX
American Express
CHINA_UNIONPAY
China UnionPay
DINERS_CLUB
Diners Club
DISCOVER
Discover
JCB
JCB (Japan Credit Bureau)
MASTERCARD
MasterCard
OTHER
The scheme of the card used in the transaction could not be identified.
RUPAY
RuPay
UATP
UATP (Universal Air Travel Plan)
VISA
Visa
Digits
CONDITIONAL
A number used to differentiate between cards with the same Primary Account Number (PAN).
This field corresponds to EMV tag 5F34
Data is a string that consists of the characters 0-9.
Enumeration
CONDITIONAL
This field only applies if you collect cards from your payers, store them, and either you or your payers use the stored value for subsequent payments.
If you store using gateway tokenization then you can ignore this field, unless you do payments with both stored and non-stored cards. If you do both, then you must supply the NOT_STORED value for the non-stored case.
If you use Scheme Tokenization services like MDES and store the tokens provided, you have to provide the value STORED and if you pass the token value with out storing them, provide the value NOT_STORED.
If you store yourself, you have to provide the TO_BE_STORED or STORED values for all payments.
Value must be a member of the following list. The values are case sensitive.
NOT_STORED
Set this value if the card or token details provided will not be stored. This is the default value for merchants without tokenization.
STORED
Set this value if the card or token details provided have been stored previously. This is the default value when paying with a gateway token.
TO_BE_STORED
Set this value if this is the first transaction using the card and you intend to store the card or token details on success. This is the default value for tokenization merchants who present a payment with a PAN.
String
CONDITIONAL
Tags provide you with additional information about the card.
For example, identifying if it is an EBT (Electronic Benefits Transfer) or Health Benefit Card. You can use this information to support your decisions about accepting payments with this card. The data is encoded in JSON as an object map indexed on the tag name. Some standard tag names are EBT and HEALTH_BENEFIT_CARD_IIAS. If these tags apply to the card, the tag will have value true, otherwise it will be absent. Other tag names with other values might also exist, depending on which acquirer processed the transaction. For example, an EBT card might return value: {"ACME_CARD_IDENTIFIER":"23", "EBT":true} Contact your payment provider if you wish to understand all tags available for your acquirers.
Data can consist of any characters
Boolean
CONDITIONAL
Indicates whether card track data is provided.
JSON boolean values 'true' or 'false'.
The additional details required to initiate a giropay browser payment.
Digits
CONDITIONAL
German bank identifier (Bankleitzahl) for the payer's bank account.
Data is a string that consists of the characters 0-9.
Alphanumeric
CONDITIONAL
The international Business Identifier Code (BIC) for the payer's bank account.
Data may consist of the characters 0-9, a-z, A-Z
String
CONDITIONAL
The International Bank Account Number (IBAN) for the payer's bank account.
By default, the bank account number will be returned in a masked format, for example, xxxxxx0000. If you wish to return unmasked bank account numbers, you must have the requisite permission, set responseControls.sensitiveData, and authenticate your call to the API using certificate authentication. Contact your payment service provider for further information.
Data can consist of any characters
Information about the payer's iDEAL account provided to you when the payer successfully makes a payment.
String
CONDITIONAL
The name of the bank account holder for the payer's bank account.
Data can consist of any characters
Alphanumeric
CONDITIONAL
The international Business Identifier Code (BIC) for the payer's bank account.
Data may consist of the characters 0-9, a-z, A-Z
String
CONDITIONAL
The International Bank Account Number (IBAN) for the payer's bank account.
By default, the bank account number will be returned in a masked format, for example, xxxxxx0000. If you wish to return unmasked bank account numbers, you must have the requisite permission, set responseControls.sensitiveData, and authenticate your call to the API using certificate authentication. Contact your payment service provider for further information.
Data can consist of any characters
Additional details related to Open Banking Bank Transfer.
String
ALWAYS PROVIDED
Identifier of the payer's bank, also known as ASPSP (Account Servicing Payment Services Provider)
Data can consist of any characters
Information about the payer's PayPal account.
It is provided to you when the payer successfully makes a payment using PayPal or when you have established a billing agreement with the payer.
Email
CONDITIONAL
The email address of the payer's PayPal account.
Ensures that the email address is longer than 3 characters and adheres to a generous subset of valid RFC 2822 email addresses
String
CONDITIONAL
The name of the account holder of the payer's PayPal account.
Data can consist of any characters
Details about the agreement you have established with the payer that allows you to bill the payer's PayPal account for goods or services.
Enumeration
CONDITIONAL
Indicates the number of billing agreements between you and this payer.
Value must be a member of the following list. The values are case sensitive.
MULTIPLE
Indicates that you have multiple billing agreements with this payer. This means that a new agreement ID will be returned in response to each request.
SINGLE
Indicates that you have a single billing agreement with this payer. This means that the same agreement ID will be returned in response to each request.
String
CONDITIONAL
Your description for the PayPal billing agreement.
This description is displayed to the payer when they are asked to approve the billing agreement.
Data can consist of any characters
String
CONDITIONAL
An identifier provided by PayPal for the billing agreement.
Data can consist of any characters
String
CONDITIONAL
Your name for the PayPal billing agreement.
Data can consist of any characters
String
CONDITIONAL
The unique identifier for the payer assigned by PayPal.
Data can consist of any characters
Additional details related to a Przelewy24 browser payment.
String
ALWAYS PROVIDED
The name of the bank account holder for the payer's bank account.
Data can consist of any characters
Details about the payer's bank account used for a payment made using SEPA
String
ALWAYS PROVIDED
The name of the bank account holder for the payer's bank account.
Data can consist of any characters
Alphanumeric
CONDITIONAL
The international Business Identifier Code (BIC) for the payer's bank account.
Data may consist of the characters 0-9, a-z, A-Z
String
ALWAYS PROVIDED
The International Bank Account Number (IBAN) for the payer's bank account.
By default, the bank account number will be returned in a masked format, for example, xxxxxx0000. If you wish to return unmasked bank account numbers, you must have the requisite permission, set responseControls.sensitiveData, and authenticate your call to the API using certificate authentication. Contact your payment service provider for further information.
Data can consist of any characters
Details about the payer's bank account used for a payment made using Sofortbanking.
The format of the bank account details differs per country.
String
CONDITIONAL
The name of the bank account holder for the payer's bank account.
Data can consist of any characters
String
CONDITIONAL
The country-specific bank account number for the payer's bank account.
By default, the bank account number will be returned in a masked format, for example, xxxxxx0000. If you wish to return unmasked bank account numbers, you must have the requisite permission, set responseControls.sensitiveData, and authenticate your call to the API using certificate authentication. Contact your payment service provider for further information.
Data can consist of any characters
String
CONDITIONAL
The country-specific bank identifier for the payer's bank account.
Data can consist of any characters
String
CONDITIONAL
The international Business Identifier Code (BIC) for the payer's bank account.
Data can consist of any characters
Upper case alphabetic text
CONDITIONAL
The 3 letter ISO standard alpha country code of the payer's bank account.
Data must consist of the characters A-Z
String
CONDITIONAL
The International Bank Account Number (IBAN) for the payer's bank account.
By default, the bank account number will be returned in a masked format, for example, xxxxxx0000. If you wish to return unmasked bank account numbers, you must have the requisite permission, set responseControls.sensitiveData, and authenticate your call to the API using certificate authentication. Contact your payment service provider for further information.
Data can consist of any characters
Additional details related to a Trustly.
String
ALWAYS PROVIDED
The name of the bank account holder for the payer's bank account.
Data can consist of any characters
Additional details related to a WeChat Pay browser payment.
String
ALWAYS PROVIDED
The name of the account holder for the payer's WeChat Pay account.
Data can consist of any characters
Alphanumeric
CONDITIONAL
Gateway token that uniquely identifies a card and associated details.
Data may consist of the characters 0-9, a-z, A-Z
Enumeration
CONDITIONAL
The payment method used for this authentication.
If you are passing card or scheme token data on the API, then you need to set this value, and also provide the card or token details in the sourceOfFunds.provided.card group.
If you are making a payment with a gateway token, then you can leave this field unset, and only populate the sourceOfFund.token field.
Value must be a member of the following list. The values are case sensitive.
ACH
The payer chose to pay using an electronic fund transfer, to be processed via the Automated Clearing House (ACH) Network. You must provide the payer's bank account details and information about the type of ACH payment under the sourceOfFunds.provided.ach parameter group.
ALIPAY
The payer selected the payment method Alipay.
BOLETO_BANCARIO
The payer selected the payment method Boleto Bancario.
CARD
Use this value for authentications using the card number.
GIROPAY
The payer selected the payment method giropay.
IDEAL
The payer selected the payment method iDEAL.
KLARNA
The payer selected the payment method Klarna.
NONE
The transaction transfers money to or from the merchant, without the involvement of a payer. For example, recording monthly merchant service fees from your payment service provider.
PAYPAL
The payer selected the payment method PayPal.
SEPA
The payer selected the payment method SEPA.
SOFORT
The payer selected the payment method Sofortbanking.
WECHAT_PAY
The payer selected the payment method WeChatPay.
DateTime
CONDITIONAL
Indicates the date and time the gateway considers the transaction to have last been updated.
An instant in time expressed in ISO8601 date + time format - "YYYY-MM-DDThh:mm:ss.SSSZ"
DateTime
CONDITIONAL
Indicates the date and time the gateway considers the transaction to have been created.
The gateway uses timeOfRecord as a point-in-time value for operations such as sorting, billing, and reporting.
An instant in time expressed in ISO8601 date + time format - "YYYY-MM-DDThh:mm:ss.SSSZ"
Information about this transaction.
String
CONDITIONAL
An identifier allocated by an acquirer to the merchant.
This may also be referred to as the Card Acceptor Identification Code (CAIC), Card Acceptor ID (CAID), or Service Establishment Number (SE Number).
Data can consist of any characters
Decimal
ALWAYS PROVIDED
The total amount for the transaction.
Data is a decimal number.
Enumeration
CONDITIONAL
Indicates the result of payer authentication.
Value must be a member of the following list. The values are case sensitive.
AUTHENTICATION_ATTEMPTED
Payer authentication was attempted and a proof of authentication attempt was obtained.
AUTHENTICATION_AVAILABLE
Payer authentication is available for the payment method provided.
AUTHENTICATION_EXEMPT
Exemption from the Regulatory Technical Standards (RTS) requirements for Strong Customer Authentication (SCA) under the Payment Services Directive 2 (PSD2) regulations in the European Economic Area has been claimed or granted.
AUTHENTICATION_FAILED
The payer was not authenticated. You should not proceed with this transaction.
AUTHENTICATION_NOT_IN_EFFECT
There is no authentication information associated with this transaction.
AUTHENTICATION_NOT_SUPPORTED
The requested authentication method is not supported for this payment method.
AUTHENTICATION_PENDING
Payer authentication is pending completion of a challenge process.
AUTHENTICATION_REJECTED
The issuer rejected the authentication request and requested that you do not attempt authorization of a payment.
AUTHENTICATION_REQUIRED
Payer authentication is required for this payment, but was not provided.
AUTHENTICATION_SUCCESSFUL
The payer was successfully authenticated.
AUTHENTICATION_UNAVAILABLE
The payer was not able to be authenticated due to a technical or other issue.
Upper case alphabetic text
ALWAYS PROVIDED
The currency of the transaction expressed as an ISO 4217 alpha code, e.g. USD.
Data must consist of the characters A-Z
String
ALWAYS PROVIDED
Unique identifier for this transaction to distinguish it from any other transaction on the order.
An order can have transactions representing:
- Movement of money. For example, payments and refunds.
- Validations. For example, account verification or 3-D Secure authentication of the payer.
- Undoing other transactions. For example, voiding a payment transaction.
- Chargebacks.
- Fees from your payment service provider.
If you attempt an operation and it fails (eg you try to PAY on a card with no funds), then you need a new id for each retry.
Data can consist of any characters
Enumeration
ALWAYS PROVIDED
Indicates the type of action performed on the order.
Value must be a member of the following list. The values are case sensitive.
AUTHENTICATION
Authentication
AUTHORIZATION
Authorization
AUTHORIZATION_UPDATE
Authorization Update
CAPTURE
Capture
CHARGEBACK
Chargeback
DISBURSEMENT
Disbursement
FUNDING
The transaction transfers money to or from the merchant, without the involvement of a payer. For example, recording monthly merchant service fees from your payment service provider.
PAYMENT
Payment (Purchase)
REFUND
Refund
REFUND_REQUEST
Refund Request
VERIFICATION
Verification
VOID_AUTHORIZATION
Void Authorization
VOID_CAPTURE
Void Capture
VOID_PAYMENT
Void Payment
VOID_REFUND
Void Refund
String
CONDITIONAL
The Web Services API version that you submitted the request in.
Data can consist of any characters
Errors
Information on possible error conditions that may occur while processing an operation using the API.
Enumeration
Broadly categorizes the cause of the error.
For example, errors may occur due to invalid requests or internal system failures.
Value must be a member of the following list. The values are case sensitive.
INVALID_REQUEST
The request was rejected because it did not conform to the API protocol.
REQUEST_REJECTED
The request was rejected due to security reasons such as firewall rules, expired certificate, etc.
SERVER_BUSY
The server did not have enough resources to process the request at the moment.
SERVER_FAILED
There was an internal system failure.
String
Textual description of the error based on the cause.
This field is returned only if the cause is INVALID_REQUEST or SERVER_BUSY.
Data can consist of any characters
String
Indicates the name of the field that failed validation.
This field is returned only if the cause is INVALID_REQUEST and a field level validation error was encountered.
Data can consist of any characters
String
Indicates the code that helps the support team to quickly identify the exact cause of the error.
This field is returned only if the cause is SERVER_FAILED or REQUEST_REJECTED.
Data can consist of any characters
Enumeration
Indicates the type of field validation error.
This field is returned only if the cause is INVALID_REQUEST and a field level validation error was encountered.
Value must be a member of the following list. The values are case sensitive.
INVALID
The request contained a field with a value that did not pass validation.
MISSING
The request was missing a mandatory field.
UNSUPPORTED
The request contained a field that is unsupported.
Enumeration
A system-generated high level overall result of the operation.
Value must be a member of the following list. The values are case sensitive.
ERROR
The operation resulted in an error and hence cannot be processed.